€231.50 + VAT

Disc Sander TG 250/E
[28060]

Sands long edges, end sections, radii, mitres and by turning work piece over - accurate flat surfaces at right angles. Used on soft and hard woods, non-ferrous metals, steel, plastics (Plexiglass and fibreglass), cork and rubber. A simple chart indicates the recommended speeds on different materials.

Sturdy construction:
Main body of ribbed die-cast aluminium (not a steel tube or sheet metal construction). Table of die-cast aluminium with machined surface. Tilts 15° inwards and 45° outwards (a scale facilitates accurate adjustment). Table mitre gauge supplied as standard. Machined backing disc - driven by a twin ball bearing spindle. Standard, commercially available sanding discs fix firmly and can be replaced quickly. A dust collection adapter for attaching a vacuum cleaner/dust extractor is included.

Technical Data:

220 - 240 Volt with drive via toothed belt (reduction ratio 7.3:1).
Electronic speed control approx. 250 - 750 rpm
Disc diameter 250 mm.
Max. sanding height 135 mm
Table 275 x 105 mm (tilts 15° in, 45° out).
Overall size without table 330 x 280 x 230 mm.
Complete with mitre gauge and 2 each sanding discs of 100 grit and 240 grit.

Reviews

Customers who bought this product also purchased

2-speed scroll saw DSH

Self-adhesive white corundum sanding discs for TG 250/E

Self-adhesive silicone carbide sanding discs for TSG 250/E

Shopping Cart

1 x	Broca de alta duração de 2.4mm
2 x	Radius Cutting Attachment, complete with pointed tool
3 x	Wrench Keys 0.9
2 x	Collet Set for accurate use on round components
2 x	PLCC Puller
3 x	Micro Compound Table KT 70
3 x	Wrench Keys 2.0
3 x	Centre Turning Attachment
1 x	Step clamps made of steel
2 x	Cross-recess Screwdrivers 0
2 x	Cross-recess Screwdrivers 1
3 x	Cotton polishers
2 x	Flexible silicon discs
2 x	Cross-recess Screwdrivers 1
2 x	Cross-recess Screwdrivers 2
3 x	Aluminium Die-Cast
3 x	Cotton polishers
3 x	TORX-screwdrivers T9
1 x	ESD Tweezers 5-194
2 x	MICROMOT tool holder
2 x	Flexishaft MICROMOT 110/P
1 x	Cross-recess Screwdrivers 2
3 x	Footswitch FS
1 x	Wrench Keys 0.7
1 x	HSS cutting blade for OZI
2 x	Protective device for hand-operated MICROMOT
2 x	MICROMOT extension cord. 300cm.
3 x	Flexishaft MICROMOT 110/BF
2 x	Floor cover ESD
3 x	Dividing attachment TA 230 for PF 250
1 x	ESD Tweezers 5-191
2 x	MICROMOT drill stand MB 200
1 x	14-piece parallel supports set
3 x	Three-jaw steel drill chuck
2 x	Conj 5 pinças ESD
2 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
2 x	ESD Tweezers 5-195
3 x	Contact bracelet with spiral cord
2 x	ESD Tweezers 5-192
2 x	Steel wheels
2 x	Steel cups
1 x	Fixed Steady
2 x	ESD Brushe
1 x	Cotton polishers
2 x	Diamond Twist Drills
1 x	Sanding pads for OZI 220/E grit 240
2 x	Stainless steel brushes
2 x	Diamond Grinding Bits 1,8mm
2 x	Flexible polishing pad set
2 x	Ball-shaped diamond coated 1.2mm
2 x	Cups brushes
2 x	Diamond Grinding Bits 5mm
2 x	Crocodile clip
2 x	Diamond Grinding Bits 1mm
1 x	Flexible silicon discs
2 x	Diamond Cutting Discs
1 x	Felt polishers
2 x	Ball-shaped diamond coated 3.2mm
2 x	Ball-shaped diamond coated 2.2mm
2 x	Four Jaw Chuck
1 x	BIT-SET
2 x	Diamond Cutting Discs
2 x	Diamond Cutting Discs
2 x	Gear Chuck
1 x	Sanding pads for OZI 220/E grit 150
2 x	Earth wire
2 x	Earth wire with dummy Schunko-plug
2 x	Earthing module
1 x	Flexible silicon discs
2 x	Diamond Grinding Bits 1,8mm
3 x	ESD Brushe
1 x	Felt polishers
2 x	Flexible polishing pad set
2 x	Steel brushes
2 x	Tool holder for rotary tools
2 x	Stainless steel cups
2 x	Earth wire
1 x	Felt polishers
2 x	Wheels brushes
1 x	Felt polishers
1 x	Brass brushes
2 x	Diamond Cutting Discs
1 x	Grinding mop cylinder grit 120
2 x	Insulation Resistance Tester MG500
2 x	Spare cutting wire
3 x	High quality corundum grinding bits
2 x	Hot wire cutter THERMOCUT 650
1 x	Machine Vice MS 4
5 x	Hot wire cutter THERMOCUT 230/E
2 x	Milling cutter set (6 - 10mm)
2 x	Hot wire cutter THERMOCUT 12/E
1 x	MICRO cutter MIC
1 x	MICRO Heat gun MH 550
2 x	Tungsten tipped saw blade
1 x	Fluted filter for CW-matic
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Glass fibre contact cleaner brush
1 x	Diamond-coated cutting and roughing disc
1 x	Milling cutter set (2 - 5mm)
2 x	High quality corundum grinding bits
2 x	High quality corundum grinding bits
2 x	High quality corundum grinding bits
2 x	High quality corundum grinding bits
2 x	High quality corundum grinding bits
2 x	High quality corundum grinding bits
1 x	Microfibre cloth
2 x	High quality corundum grinding bits
1 x	PLCC Extractor
1 x	Insulation Resistance Tester MG125
1 x	HSS immersion saw blades for OZI
1 x	Cutting disc, with reinforcement
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Grinding mop cylinder grit 120
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Corundum sanding discs for LWS
1 x	Corundum bound cutting disc for LWS
1 x	Long neck angle milling/drilling unit LWB 220/E

€6,979.73