€109.00 + VAT

Angle polisher WP/E
[28660]

For perfect surfaces even in tight spots: Finishing o f blank surfaces, cleaning, rust removal, for the finishing touches after varnishing. Balanced, powerful, quiet and long-lasting special DC motor. Quiet planetary gear in die-cast aluminium housing and continuously variable speed control (full-wave electronics) for low and constant speeds even during high contact pressure. Main housing of glass-fibre reinforced POLYAMIDE with soft component. Securely stored in stylish case made of high-grade polypropylene with original equipment for immediate use. Rubber backing disc with hook and loop fastening, polishing sponge (medium hard), lambswool polishing disc, polishing felt for metals and non-ferrous metals (medium hard), 12 sanding discs K 2000 and NIGRIN polishing emulsion (75ml) as well as a microfibre cloth. Technical data: 220 - 240V. 100W. 800 - 2.500rpm. Length 270mm. Weight 720g. Class 2 insulation.

Reviews

Customers who bought this product also purchased

Super-fine sanding discs grain 2000	Professional polishing sponge	Jig saw blades made of HSS
Supercut jig saw blades of special steel	Pensander PS 13	MICRO Heat gun MH 550

Shopping Cart

2 x	10-piece wood router cutter set
1 x	Edge cutter with pin 6.4mm
1 x	Grinding mop cylinder grit 80
1 x	Rebating cutter 6.4mm
1 x	Slot cutter 6.5mm
1 x	Rounding over cutter 6.4mm
1 x	Slot cutter 3.2mm
1 x	Grinding and Polishing Machine SP/E
1 x	Half round cutter 13mm
2 x	Belt sander BS/E
1 x	Slot cutter 5.0mm
1 x	Grinding mop cylinder grit 120
1 x	Angle polisher WP/E
1 x	Combi cutter 6.5/2.5mm
1 x	Disc Sander TG 125/E
1 x	Delta sander OZI/E
1 x	Polishing machine PM 100
1 x	Belt sander BBS/S
1 x	Disc Sander TG 250/E
2 x	Grinding mop cylinder grit 120
2 x	Angle cutter 45 °
1 x	Long neck angle grinder LHW
1 x	Core box bit 3.2mm
1 x	Pensander PS 13
1 x	V-slot cutter 6.5mm
1 x	Grinding mop cylinder grit 240
1 x	Motor-driven carving device MSG
1 x	Super jig saw STS/E
3 x	Backing disc for LWS
1 x	Cut off/mitre saw KGS 80
1 x	Polishing felt, medium hard
1 x	Screwdriver bit set. 49-piece.
1 x	Professional set for finish grinding and polishing
1 x	Three jaw chuck for the lathe DB 250
1 x	Microfibre cloth
1 x	Super-fine sanding discs grain 2000
1 x	Hot wire cutter THERMOCUT 650
2 x	Machine Vice MS 4
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Universal and oil siphoning pump AP 12
1 x	MICRO cutter MIC
1 x	Special Fused Alumina (Hardness N).
2 x	Bench Circular Saw KS 230
1 x	Spare cutting wire
1 x	Hot wire cutter THERMOCUT 12/E
1 x	Lambswool polishing disc
1 x	MICRO shaper MP 400
1 x	Super safety and specialty bit set, 75-piece
1 x	Thicknesser DH 40
1 x	Replacement glue sticks for HKP 220
1 x	Supercut jig saw blades of special steel
1 x	Professional polishing sponge
1 x	Tungsten Carbide Tipped (TCT)
1 x	Precision Vice FMS 75
2 x	Precision steel vice PM 40
1 x	Jig saw blades made of HSS
1 x	Diamond Coated
1 x	Five piece HSS chisel set
1 x	Polishing Set
1 x	Scroll saw DS 230/E
2 x	2-speed scroll saw DSH
1 x	Silicon-Carbide.
1 x	Super-Cut
1 x	Multipurpose Vices Primus 75
1 x	Jig saw STS 12/E
1 x	Hot wire cutter THERMOCUT 230/E
1 x	MICRO woodturning lathe DB 250
1 x	Multipurpose Vices Primus100
1 x	Table Saw FET
1 x	Precision Vice FMZ
2 x	Footswitch FS
1 x	Super-fine sanding discs grain 000
1 x	Independent four jaw chuck for the DB 250
1 x	MICRO Band Saw MBS 240/E
1 x	Surface planer AH 80
1 x	Super-fine sanding discs grain 400
2 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Corundum sanding discs for LWS
1 x	Replacement belts for BSL 220/E
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Diamond blade
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Corundum fan sander for LWS
1 x	Lathe System PD 400
1 x	Tungstein carbide rasp - and cutting disc
1 x	Corundum grinding disc for LWS
1 x	Diamond-coated cutting and roughing disc
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Saw blade made of high-alloy special steel
2 x	Band knife of hardened spring band steel (without teeth)
1 x	Crosscut 'Super-Cut' blade
1 x	Corundum fan sander for LWS
2 x	Blade for Steel and brass
1 x	Blade for Wood and Plastics
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Corundum grinding disc for LWS
1 x	Sanding fleece for LWS
1 x	HSS boring tool set, 6 pieces
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Replacement belts for BSL 220/E
1 x	Corundum sanding discs for LWS
1 x	Blade guides separately
1 x	Replacement belts for BSL 220/E
1 x	Corundum bound cutting disc for LWS
1 x	Replacement belts for BSL 220/E
1 x	Tungsten tipped saw blade
1 x	Sanding fleece for LWS
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Precision lathe PD 250/E
2 x
1 x	Diamond blade for MBS 240/E
1 x	Solid carbide saw blade
1 x	Universal polishing paste
1 x	Three piece thread cutting set
1 x	Gear Chuck
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	MICROMOT steel collet set
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Fluted filter for CW-matic
1 x	Diamond-coated cutting disc for MIC
1 x	Tool holder for rotary tools
1 x	Bench drill press TBH
1 x	Flexishaft MICROMOT 110/P
1 x	Chuck for TBM 220
1 x	Step clamps made of steel
2 x	Micro Compound Table KT 70
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Mill/Drill Unit BFB 2000.
1 x	MICRO Heat gun MH 550
1 x	MICRO-screwdrivers
1 x	Blade holders for DS 460
1 x	Ball-shaped diamond coated 2.2mm
1 x	Dividing attachment TA 230 for PF 250
1 x	Three-jaw steel drill chuck
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Ball-shaped diamond coated 3.2mm
1 x	MICROMOT drill stand MB 200
1 x	Flexishaft MICROMOT 110/BF
1 x	MICROMOT glue gun HKP 220
2 x	Aluminium Die-Cast
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Fixed Steady
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Four Jaw Chuck
1 x	Ball-shaped diamond coated 1.2mm
1 x	Protective device for hand-operated MICROMOT
2 x	14-piece parallel supports set
1 x	MICROMOT extension cord. 300cm.
1 x	Router base OFV
1 x	MICROFLAM gas soldering set MGS
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Centre Turning Attachment
1 x	Universal holder UHZ
1 x	Bench drill machine TBM 220
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Ball shaped milling cutters
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Complete Engraving Kit with trial glass
1 x	Tungsten carbide cutters set
1 x	MICROFLAME burner MFB/E
1 x	Spiral blade. 125mm long with plain ends (without pins).

€12,110.55