€172.75 + VAT

Compact workshop vacuum cleaner CW-matic
[27490]

Compact workshop vacuum cleaner
CW-matic

The vacuum cleaner runs as long as the machine runs. There is a follow-up time of 5 seconds after switching off the power tool.

Smooth operation with high suction capacity. With large fluted filter made of POLYPROPYLENE to be cleaned and washed manually. Additional fine dust paper filter (not essential for this function). Container is easily emptied by removing the appliance lid with the motor unit. Blowing function available by refitting the vacuum hose. Also suitable for vacuuming liquids. Complete with 3.5m vacuum hose, 2-part aluminium vacuum pipe (98cm), floor nozzle, brush nozzle, crevice nozzle and adapter for connection to standard adapter of all such equipped PROXXON machines. Practical holder for the suction connection included (description on the left). Supplied with 6 fine dust paper filters.

Technical data:
220 - 240V. 1,100W. Connection for electric tools from 25 to 2,000W.
Container 18l. With 5m connection cable.

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Grinding mop cylinder grit 120
2 x	Tungstein carbide rasp - and cutting disc
1 x	Special Fused Alumina (Hardness N).
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Professional set for finish grinding and polishing
1 x	Fluted filter for CW-matic
1 x	Broca de alta duração de 2.9mm
1 x	sandpaper for PS 13 Grit 400
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Silicon-Carbide.
1 x	Fine dust paper filter for CW-matic
1 x	Grinding mop cylinder grit 80
1 x	Cylinder sander WAS/E
1 x	Broca de alta duração de 2.7mm
1 x	sandpaper for PS 13 Grot 180
1 x	Polishing Set
1 x	Replacement glue sticks for HKP 220
1 x	Broca de alta duração de 2.6mm
1 x	Super-fine sanding discs grain 000
2 x	Grinding mop cylinder grit 240
2 x	Corundum fan sander for LWS
1 x	Broca de ponto 3.15 x 1.25
1 x	Diamond-coated cutting and roughing disc
1 x	Broca de alta duração de 3.0mm
1 x	Flexishaft MICROMOT 110/P
1 x	Broca de alta duração de 1.3mm
1 x	Insulation Resistance Tester MG500
1 x	Backing disc for LWS
1 x	Broca de alta duração de 2.2mm
1 x	Super-Cut
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x	Spare cutting wire
1 x	Broca de alta duração de 2.3mm
1 x	Aluminium Die-Cast
1 x	broca de alta duração de 0,2mm
1 x	Engraving tool GG
1 x	Flexishaft MICROMOT 110/BF
1 x	FLUX-OFF 400ml
2 x	Broca de alta duração de 0.4mm
1 x	Broca de alta duração de 1.5mm
1 x	Super safety and specialty bit set, 75-piece
2 x	Independent four jaw chuck for the DB 250
1 x	Broca de alta duração de 1.2mm
2 x	Dividing attachment TA 230 for PF 250
1 x	Broca de alta duração de 0.7mm
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Insulation Resistance Tester MG125
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	DEGRESER 200ml
1 x	Broca de alta duração de 0.5mm
1 x	Router base OFV
1 x	Screwdriver bit set. 49-piece.
1 x	Micro Compound Table KT 70
2 x	broca de alta duração de 0,6mm
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Sanding fleece for LWS
1 x	sanding belts for BBS/s Grit 80
1 x	Broca de alta duração de 0.3mm
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Machine Vice MS 4
1 x	Broca de alta duração de 0.8mm
1 x	Blade holders for DS 460
1 x	Tungsten Carbide Tipped (TCT)
1 x	MICROMOT steel collet set
1 x	Blade for Steel and brass
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Precision steel vice PM 40
1 x	Flap Wheels
1 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x	Mill/Drill Unit BFB 2000.
1 x	Band knife of hardened spring band steel (without teeth)
1 x	MICROMOT tool holder
1 x
1 x	Spiral blade. 125mm long with plain ends (without pins).

€2,750.18