€172.75 + VAT

Compact workshop vacuum cleaner CW-matic
[27490]

Compact workshop vacuum cleaner
CW-matic

The vacuum cleaner runs as long as the machine runs. There is a follow-up time of 5 seconds after switching off the power tool.

Smooth operation with high suction capacity. With large fluted filter made of POLYPROPYLENE to be cleaned and washed manually. Additional fine dust paper filter (not essential for this function). Container is easily emptied by removing the appliance lid with the motor unit. Blowing function available by refitting the vacuum hose. Also suitable for vacuuming liquids. Complete with 3.5m vacuum hose, 2-part aluminium vacuum pipe (98cm), floor nozzle, brush nozzle, crevice nozzle and adapter for connection to standard adapter of all such equipped PROXXON machines. Practical holder for the suction connection included (description on the left). Supplied with 6 fine dust paper filters.

Technical data:
220 - 240V. 1,100W. Connection for electric tools from 25 to 2,000W.
Container 18l. With 5m connection cable.

Reviews

Shopping Cart

1 x	MICROMOT drill stand MB 200
1 x	Corundum bound cutting disc for LWS
1 x	Diamond-coated cutting and roughing disc
1 x	Special Fused Alumina (Hardness N).
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Corundum sanding discs for LWS
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	Mini side cutters EUROline-Conductive
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Belt sander BBS/S
1 x	Side cutters EUROline-Conductive
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Belt sander BS/E
1 x	Disc Sander TG 250/E
2 x	Mini side cutters EUROline-Conductive
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Flexishaft MICROMOT 110/P
2 x	Mini side cutters EUROline-Conductive
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Corundum fan sander for LWS
1 x	Corundum grinding disc for LWS
1 x	MICROMOT extension cord. 300cm.
1 x	Protective device for hand-operated MICROMOT
1 x	Silicon-Carbide.
2 x	EUROline-Conductive set of pliers
1 x	Tungstein carbide rasp - and cutting disc
1 x	Aluminium Die-Cast
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Angle polisher WP/E
1 x	Micro Compound Table KT 70
1 x	Sanding fleece for LWS
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Backing disc for LWS
1 x	Disc Sander TG 125/E
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Mill/Drill Unit BFB 2000.
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Round nose pliers 45º EUROline-Conductive
1 x	Grinding and Polishing Machine SP/E
1 x	Polishing Set
1 x	Footswitch FS
1 x	Sanding fleece for LWS
1 x	MICROMOT tool holder
1 x	Polishing machine PM 100
1 x	Delta sander OZI/E
1 x	Long neck angle grinder LHW
1 x	Corundum grinding disc for LWS
1 x	Corundum fan sander for LWS
1 x	Flexishaft MICROMOT 110/BF
1 x	MICROMOT steel collet set
2 x	Pensander PS 13
1 x	Corundum sanding discs for LWS
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Three-jaw steel drill chuck
1 x	14-piece parallel supports set
1 x	Diamond Coated
1 x	Step clamps made of steel
1 x	Super-Cut
1 x	Tungsten Carbide Tipped (TCT)
1 x	Hot wire cutter THERMOCUT 650
1 x	Solid carbide saw blade
1 x	Chuck for TBM 220
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x

€3,272.65