€56.00 + VAT

MICROMOT Mains Adapter NG 5/E
[28704]

MICROMOT Mains Adapter NG 5/E

In compact NORYL casing (recommended for transformers). With superior capacity of 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Master switch for turning off transformer without needing to unplug. Red LED indicates "ready". PTC protection against overload (plugged-in machine will not restart automatically). Modern design with storage holes for tools with 2.35 mm and 3 mm shafts. Foldable tool rest provides a secure place for keeping the MICROMOT tool at the ready.

Technical Data:
Capacity: 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Primary supply 220/240 Volt. Thyristor electronic speed control (with feedback) for optimum tool speed and high torque at low speeds. 3 polarised sockets for MICROMOT machines. 1 pair of sockets for standard banana plugs (4 mm diameter).

Reviews

Customers who bought this product also purchased

MICRO Screwdriver MIS 1. Complete with 16 inserts.	MICROMOT extension cord. 300cm.	Hot wire cutter THERMOCUT 12/E
Hot wire cutter THERMOCUT 230/E	MICROFLAME burner MFB/E	Spare cutting wire

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Corundum grinding disc for LWS
1 x	Diamond Grinding Bits 1mm
1 x	Disc Sander TG 250/E
1 x	Diamond-coated cutting disc for MIC
1 x	Cylindrical cutters
1 x	Diamond Twist Drills
1 x	Diamond Coated
1 x	Delta sander OZI/E
1 x	Diamond Grinding Bits 1,8mm
1 x	Disc cutters
1 x	Diamond Grinding Bits 1,8mm
1 x	Diamond blade for MBS 240/E
1 x	Diamond Grinding Bits 5mm
1 x	Diamond blade
1 x	Diamond Cutting Discs
1 x	Diamond Cutting Discs
1 x	Disc Sander TG 125/E
1 x	Diamond-coated cutting and roughing disc
1 x	DIL3/SOT23-3 ZIF-CS
1 x	DIL40/SOIC16 ZIF MB-1
1 x	DIL20/SOIC20 ZIF 300 mil
1 x	DIL20W/SOIC20 ZIF 300mil
1 x	DIL18W/SOIC18 ZIF 300mil
1 x	DIL16/SOIC16-1 ZIF 170mil
1 x	DIL40/SOIC20 ZIF AWM-1
1 x	DIL40/SOIC28 ZIF AWM-1
1 x	DIL32/SOIC32 ZIF 445mil
1 x	DIL14W/SOIC14 ZIF 150mil
1 x	DIL16W/SOIC16 ZIF 300mil
1 x	DIL28/SOIC28 ZIF 330 mil
1 x	Ball-shaped diamond coated 2.2mm
1 x	Ball-shaped diamond coated 3.2mm
1 x	Blade for Steel and brass
1 x	Belt sander BS/E
1 x	Band knife of hardened spring band steel (without teeth)
1 x
1 x	Angle polisher WP/E
1 x	Belt sander BBS/S
1 x	Bench Circular Saw KS 230
1 x	Corundum sanding discs for LWS
1 x	Fine dust paper filter for CW-matic
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Blade guides separately
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Combi cutter 6.5/2.5mm
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Cone shaped milling cutter
1 x	Collet Set for accurate use on round components
1 x	Complete Engraving Kit with trial glass
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Coarse-toothed (25 TPI per 25mm)
2 x	Coarse-toothed (18 TPI per 25mm)
1 x	Polishing Set
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Supercut jig saw blades of special steel
1 x	HSS immersion saw blades for OZI
1 x	Mill/Drill System BFW 40/E
1 x	MICROMOT Mains Adapter NG 2/E
1 x	MICRO woodturning lathe DB 250
1 x	HSS immersion saw blades for OZI
1 x	MICROMOT 230/E

€3,619.11