€172.75 + VAT

Compact workshop vacuum cleaner CW-matic
[27490]

Compact workshop vacuum cleaner
CW-matic

The vacuum cleaner runs as long as the machine runs. There is a follow-up time of 5 seconds after switching off the power tool.

Smooth operation with high suction capacity. With large fluted filter made of POLYPROPYLENE to be cleaned and washed manually. Additional fine dust paper filter (not essential for this function). Container is easily emptied by removing the appliance lid with the motor unit. Blowing function available by refitting the vacuum hose. Also suitable for vacuuming liquids. Complete with 3.5m vacuum hose, 2-part aluminium vacuum pipe (98cm), floor nozzle, brush nozzle, crevice nozzle and adapter for connection to standard adapter of all such equipped PROXXON machines. Practical holder for the suction connection included (description on the left). Supplied with 6 fine dust paper filters.

Technical data:
220 - 240V. 1,100W. Connection for electric tools from 25 to 2,000W.
Container 18l. With 5m connection cable.

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Step clamps made of steel
1 x	MICRO shaper MP 400
1 x	Half round cutter 13mm
1 x	Grinding mop cylinder grit 120
1 x	Tungsten tipped saw blade
1 x	Belt sander BBS/S
1 x	2-speed scroll saw DSH
1 x	Belt sander BS/E
1 x	Grinding mop cylinder grit 80
1 x	V-slot cutter 6.5mm
1 x	Tungstein carbide rasp - and cutting disc
1 x	Delta sander OZI/E
1 x	Fine dust paper filter for CW-matic
1 x	Compact workshop vacuum cleaner CW-matic
2 x	Engraving tool GG
1 x	Grinding mop cylinder grit 120
1 x	Thicknesser DH 40
1 x	Diamond blade
1 x	Slot cutter 6.5mm
1 x	Fluted filter for CW-matic
1 x	MICROFLAM gas soldering set MGS
1 x	Combi cutter 6.5/2.5mm
1 x	Long neck angle grinder LHW
1 x	Cylinder sander WAS/E
1 x	Gear Chuck
1 x	Diamond-coated cutting and roughing disc
1 x	Sanding fleece for LWS
1 x	Super safety and specialty bit set, 75-piece
2 x	Grinding mop cylinder grit 240
1 x	Saw blade made of high-alloy special steel
1 x	Machine Vice MS 4
1 x	Cut off/mitre saw KGS 80
1 x	MICRO woodturning lathe DB 250
1 x	10-piece wood router cutter set
1 x	MICRO Heat gun MH 550
1 x	Router base OFV
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Rounding over cutter 6.4mm
1 x	Sanding fleece for LWS
1 x	Angle polisher WP/E
1 x	Angle cutter 45 °
1 x	Core box bit 3.2mm
1 x	Centre Turning Attachment
1 x	Rebating cutter 6.4mm
1 x	Five piece HSS chisel set
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Collet Set for accurate use on round components
1 x	Edge cutter with pin 6.4mm
1 x	Slot cutter 5.0mm
1 x	Jig saw STS 12/E
1 x	Cutter head for copy and surface milling MT3
1 x	Complete Engraving Kit with trial glass
1 x	Four Jaw Chuck
1 x	Grinding and Polishing Machine SP/E
1 x	Corundum fan sander for LWS
1 x	Tungsten carbide cutters set
1 x	Fixed Steady
1 x	Slot cutter 3.2mm
1 x	Disc Sander TG 125/E
1 x	MICRO cutter MIC
1 x	Universal holder UHZ
1 x	Super jig saw STS/E
1 x	Corundum fan sander for LWS
1 x	Pensander PS 13
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
2 x	Universal and oil siphoning pump AP 12
1 x	Tool holder for rotary tools
2 x	Three jaw chuck for the lathe DB 250
1 x	Scroll saw DS 230/E
1 x	Crosscut 'Super-Cut' blade
1 x	MICRO Band Saw MBS 240/E
1 x	MICRO-screwdrivers
1 x	Solid carbide saw blade
1 x	MICROMOT glue gun HKP 220
1 x	Backing disc for LWS
1 x	Screwdriver bit set. 49-piece.
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Table Saw FET
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Polishing Set
1 x	Tungsten Carbide Tipped (TCT)
1 x	Microfibre cloth
1 x
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Three-jaw steel drill chuck
1 x	Jig saw blades made of HSS
1 x	Special Fused Alumina (Hardness N).
1 x	MICRO Miller FF 500
1 x	Super-fine sanding discs grain 000
1 x	Blade for Wood and Plastics
1 x	Supercut jig saw blades of special steel
1 x	Diamond-coated cutting disc for MIC
1 x	Super-Cut
1 x	sanding belts for BBS/s Grit 80
1 x	sanding belts for BBS/s Grit 240
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Professional polishing sponge
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	Replacement glue sticks for HKP 220
1 x	Super-fine sanding discs grain 2000
1 x	sandpaper for PS 13 Grit 240
1 x	Diamond Coated
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	sandpaper for PS 13 Grot 180
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Cutting disc, with reinforcement
1 x	Diamond blade for MBS 240/E
1 x	Blade for Steel and brass
1 x	Independent four jaw chuck for the DB 250
1 x	Super-fine sanding discs grain 400
1 x	Lathe System PD 400

€9,370.73