€322.35 + VAT

Bench drill press TBH
[28124]

Practical height adjustment via toothed rack with easy to operate crank. Powerful, long-lasting direct current motor. Spindle drive via triple belt pulley with the advantage of roughly 6 times the torque in the lower rotational speed range. Practical drill depth indicator with adjustable limit stop. Drill spindle with precision bearing. Spindle head with 1/2" thread for the corresponding RÖHM chuck (industrial quality). Spindle with additional fit for steel collets NO 28 200. Ideal for jig boring with the compound table KT 150. Technical data: 220 - 240 Volt. Spindle rotational speeds 1,080 - 2,400 and 4,500rpm. Sliding sleeve stroke 63mm. Height adjustment via crank 70mm. Throat 140mm. Usable table surface 200 x 200mm. Column 45 x 500mm. Tool holder up to 10mm. Drilling performance in steel 10mm. Weight approx. 10kg.

Reviews

Customers who bought this product also purchased

MICROMOT extension cord. 300cm.	Footswitch FS	Sanding Drums
Blade holders for DS 460	Metal Cutting Blades	Slot cutter 6.5mm

Shopping Cart

2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
2 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
2 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x	MICROMOT Mains Adapter NG 2/S
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
2 x	Disc Sander TG 250/E
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Five piece HSS chisel set
3 x	Pensander PS 13
3 x	Grinding and Polishing Machine SP/E
3 x	Belt sander BBS/S
3 x	Delta sander OZI/E
3 x	Belt sander BS/E
1 x	Silicon-Carbide.
1 x	Independent four jaw chuck for the DB 250
1 x	Micro Compound Table KT 70
1 x	sandpaper for PS 13 Grit 400
1 x	sandpaper for PS 13 Grot 180
1 x	sandpaper for PS 13 Grit 240
1 x	Special Fused Alumina (Hardness N).
1 x	Replacement glue sticks for HKP 220
1 x	Sanding fleece for LWS
1 x	Corundum sanding discs for LWS
1 x	Backing disc for LWS
1 x	Step clamps made of steel
1 x	Sanding pads for OZI 220/E grit 240
1 x	Sanding pads for OZI 220/E grit 80
1 x	Super-Cut
2 x	Polishing machine PM 100
1 x	Corundum grinding disc for LWS
1 x	Corundum fan sander for LWS
1 x	Corundum fan sander for LWS
1 x	Diamond Coated
1 x	Collet Set for accurate use on round components
1 x	HSS immersion saw blades for OZI
1 x	Machine Vice MS 4
1 x	Diamond-coated cutting disc for MIC
1 x	Corundum bound cutting disc for LWS
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Sanding pads for OZI 220/E grit 150
1 x	Centre Turning Attachment
1 x	Router base OFV
1 x	Diamond cutting blade for OZI
1 x	Tungsten Carbide Tipped (TCT)
1 x	Tungstein carbide rasp - and cutting disc
1 x	Diamond-coated cutting and roughing disc
1 x	Gear Chuck
1 x	Precision steel vice PM 40
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Diamond blade
1 x	Rebating cutter 6.4mm
1 x	Core box bit 3.2mm
1 x	Fine dust paper filter for CW-matic
1 x	Angle cutter 45 °
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	10-piece wood router cutter set
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Blade for Wood and Plastics
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Blade guides separately
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Rounding over cutter 6.4mm
1 x	Blade holders for DS 460
1 x	Saw blade made of high-alloy special steel
1 x	Half round cutter 13mm
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Diamond blade for MBS 240/E
1 x	Edge cutter with pin 6.4mm
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	V-slot cutter 6.5mm
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Long neck angle grinder LHW
1 x	Slot cutter 6.5mm
1 x	Angle polisher WP/E
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Combi cutter 6.5/2.5mm
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Solid carbide saw blade
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Slot cutter 3.2mm
1 x	Multiform grindstone
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Fluted filter for CW-matic
1 x	Crosscut 'Super-Cut' blade

€4,085.60