€23.99 + VAT

Pensander PS 13
[28594]

Ideal for working on surfaces in recesses, slots and small corners.

Linear (not rotating) stroke. Long-lasting special DC motor. Housing of glass-fibre reinforced POLYAMIDE. Four sanding arbors with straight shanks and four angled (all different shapes) as well as three sheets of pre-profiled self-adhesive sanding pads are included. The sheets are of grits 180, 240 and 400 with 5 of each shape per sheet.

Technical data:
Direct voltage 12 - 18V. 8,000 linear strokes/min. (2.5mm stroke length). Length 160mm. Weight 130g.

Reviews

Customers who bought this product also purchased

Supercut jig saw blades of special steel	Jig saw blades made of HSS	Replacement cutting disc for MICRO cutter MIC
Diamond-coated cutting disc for MIC	Angle polisher WP/E	Sanding Discs

Shopping Cart

1 x	Cross-recess Screwdrivers 00
1 x	Cutting disc, with reinforcement
1 x	Earth wire with dummy Schunko-plug
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	sanding belts for BBS/s Grit 150
1 x	Tungsten Carbide Tipped (TCT)
1 x	Cross-recess Screwdrivers 2
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Earthing module
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	Cross-recess Screwdrivers 000
1 x	sandpaper for PS 13 Grit 400
1 x	Cross-recess Screwdrivers Pozidriv 1
1 x	Earth wire
1 x	sandpaper for PS 13 Grit 240
1 x	Cross-recess Screwdrivers 1
1 x	Cross-recess Screwdrivers 0
1 x	Earth wire
1 x	sanding belts for BBS/s Grit 80
1 x	Cross-recess Screwdrivers 1
1 x	Cross-recess Screwdrivers 2
1 x	Crocodile clip
1 x	sanding belts for BBS/s Grit 240
1 x	sandpaper for PS 13 Grot 180
1 x	Cross-recess Screwdrivers Pozidriv 2
1 x	Protective device for hand-operated MICROMOT
1 x	Blade for Wood and Plastics
1 x	Rebating cutter 6.4mm
2 x	Centre Turning Attachment
1 x	Glass fibre contact cleaner brush
1 x	Band knife of hardened spring band steel (without teeth)
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Precision steel vice PM 40
1 x	Tungsten tipped saw blade
1 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x	Slot cutter 5.0mm
1 x	Fixed Steady
3 x	End side cutters EUROline-Conductive
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Core box bit 3.2mm
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Multipurpose Vices Primus 75
2 x	Footswitch FS
3 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
4 x	Mini side cutters EUROline-Conductive
1 x	Edge cutter with pin 6.4mm
1 x	Slot cutter 3.2mm
2 x	Machine Vice MS 4
1 x	Gear Chuck
1 x	Mill/Drill Unit BFB 2000.
2 x	Three-jaw steel drill chuck
3 x	Mini side cutters EUROline-Conductive
1 x	Flexishaft MICROMOT 110/BF
1 x	EUROline-Conductive set of pliers
1 x	Precision Vice FMZ
1 x	Plastic magnifying glass
1 x	Blade for Steel and brass
1 x	Slot cutter 6.5mm
2 x	Micro Compound Table KT 70
1 x	Glass fibre contact cleaner brush
1 x	Flexishaft MICROMOT 110/P
1 x	MICROMOT tool holder
1 x	Blade guides separately
1 x	PLCC Extractor
1 x	Combi cutter 6.5/2.5mm
1 x	MICROMOT extension cord. 300cm.
1 x	Precision Vice FMS 75
1 x	Chuck for TBM 220
1 x	Hand magnifier with LED light 3X
1 x	14-piece parallel supports set
1 x	Inspector mirror
1 x	PLCC Puller
1 x	Saw blade made of high-alloy special steel
1 x	Round nose pliers 45º EUROline-Conductive
1 x	Aluminium Die-Cast
1 x	Rounding over cutter 6.4mm
1 x	Half round cutter 13mm
1 x	Multipurpose Vices Primus100
1 x	PRECISION WIRE STRIPPER ESD-PLUS
1 x	Five piece HSS chisel set
1 x	Crosscut 'Super-Cut' blade
1 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	Collet Set for accurate use on round components
1 x	Floor cover ESD
1 x	Inpection mirror 1-978
1 x	MICROMOT steel collet set
1 x	IC tweezers
1 x	Angle cutter 45 °
2 x	Side cutters EUROline-Conductive
1 x	10-piece wood router cutter set
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Solid carbide saw blade
1 x	V-slot cutter 6.5mm
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
2 x	Dividing attachment TA 230 for PF 250
1 x	Four Jaw Chuck
2 x	Independent four jaw chuck for the DB 250
1 x	Precision caliper square
1 x	Diamond blade
2 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Flat nose pliers 45º EUROline-Conductive
2 x	Three jaw chuck for the lathe DB 250
2 x	Replacement glue sticks for HKP 220
1 x	MICROMOT drill stand MB 200
1 x	MICROMOT Mains Adapter NG 2/S
2 x	Router base OFV
1 x	Replacement belts for BSL 220/E
1 x	Replacement belts for BSL 220/E
1 x	Replacement belts for BSL 220/E
1 x	MICROMOT glue gun HKP 220
1 x	MICRO Heat gun MH 550
2 x	Universal and oil siphoning pump AP 12
1 x	Self-adhesive white corundum sanding discs for TG 125/E
2 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Supercut jig saw blades of special steel
1 x	Screwdriver bit set. 49-piece.
1 x	End side cutters 45º EUROline-Conductive
2 x	Engraving tool GG
1 x	Tungstein carbide rasp - and cutting disc
1 x	MICROFLAM gas soldering set MGS
1 x	MICRO-screwdrivers
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Replacement belts for BSL 220/E
1 x	Pinça SOIC de 8 pinos
1 x	Jig saw blades made of HSS
2 x	Compact workshop vacuum cleaner CW-matic
1 x	Silicon-Carbide.
1 x	MICROFLAME burner MFB/E
1 x	Polishing Set
1 x	Spare cutting wire
1 x	Complete Engraving Kit with trial glass
1 x	Super safety and specialty bit set, 75-piece
1 x	Special Fused Alumina (Hardness N).
1 x	IC Test clip 20 pins
1 x	Universal holder UHZ
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	ESD Tweezers 5-194
1 x	Corundum fan sander for LWS
1 x	Corundum fan sander for LWS
1 x	Backing disc for LWS
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Felt cloth polishing disc (100 x 15mm)
2 x	Step clamps made of steel
1 x	Pensander PS 13
1 x	ESD Tweezers 5-193
1 x
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Corundum bound cutting disc for LWS
1 x	Sanding fleece for LWS
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Fluted filter for CW-matic
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	ESD Brushe
1 x	ESD Brushe
1 x	ESD Tweezers 5-191
1 x	Tungsten carbide cutters set
1 x	Diamond-coated cutting and roughing disc
1 x	Hot wire cutter THERMOCUT 650
1 x	Corundum sanding discs for LWS
1 x	Corundum grinding disc for LWS
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	ESD Tweezers 5-192
1 x	Corundum grinding disc for LWS
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	Corundum sanding discs for LWS
1 x	Hot wire cutter THERMOCUT 230/E
1 x	Sanding fleece for LWS
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Hot wire cutter THERMOCUT 12/E
1 x	Fine dust paper filter for CW-matic
1 x	ESD-handling ser 9-361

€6,061.21