Top » Catalog » PROXXON » 28060

€231.50 + VAT

Disc Sander TG 250/E
[28060]

Disc Sander TG 250/E

Sands long edges, end sections, radii, mitres and by turning work piece over - accurate flat surfaces at right angles. Used on soft and hard woods, non-ferrous metals, steel, plastics (Plexiglass and fibreglass), cork and rubber. A simple chart indicates the recommended speeds on different materials.


Sturdy construction:
Main body of ribbed die-cast aluminium (not a steel tube or sheet metal construction). Table of die-cast aluminium with machined surface. Tilts 15° inwards and 45° outwards (a scale facilitates accurate adjustment). Table mitre gauge supplied as standard. Machined backing disc - driven by a twin ball bearing spindle. Standard, commercially available sanding discs fix firmly and can be replaced quickly. A dust collection adapter for attaching a vacuum cleaner/dust extractor is included.


Technical Data:

  • 220 - 240 Volt with drive via toothed belt (reduction ratio 7.3:1).
  • Electronic speed control approx. 250 - 750 rpm
  • Disc diameter 250 mm.
  • Max. sanding height 135 mm
  • Table 275 x 105 mm (tilts 15° in, 45° out).
  • Overall size without table 330 x 280 x 230 mm.
  • Complete with mitre gauge and 2 each sanding discs of 100 grit and 240 grit.
Reviews

Manufacturers
1 x Flexishaft MICROMOT 110/P
2 x Band knife of hardened spring band steel (without teeth)
1 x Cross-recess Screwdrivers 000
1 x Steel cups
2 x Flexible silicon discs
1 x sanding belts for BBS/s Grit 150
1 x Screwdriver 0.8
1 x 
1 x Wood Lathe DB450
1 x DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x Hand magnifier with LED light 3X
1 x Conj 5 pinças ESD
1 x Screwdriver 1.2
1 x Router base OFV
1 x 14-piece parallel supports set
2 x Chuck for TBM 220
1 x Cross-recess Screwdrivers 1
1 x Cross-recess Screwdrivers 1
2 x Screwdriver 2.5
2 x Mini side cutters EUROline-Conductive
1 x Felt polishers
1 x Contact bracelet with spiral cord
3 x CRIMPING PLIERS/WIRE STRIPPER
3 x CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x Flexible silicon discs
1 x Lathe tools 10mm pastilhados
1 x Crimping plier for BNC
1 x Felt polishers
1 x Cross-recess Screwdrivers 2
1 x Cross-recess Screwdrivers 00
1 x Cross-recess Screwdrivers 2
1 x Screwdriver 2.0
1 x Fine dust paper filter for CW-matic
1 x Felt polishers
2 x Cutting disc, with reinforcement
1 x Footswitch FS
1 x MICROFLAM gas soldering set MGS
1 x Screwdriver 1.5
1 x Screwdriver 1.8
1 x Snipe nose pliers 45º EUROline-Conductive
1 x Fibre-Cut Discs
1 x Snipe nose pliers 45º EUROline-Conductive
1 x Fibre-Cut Discs
1 x High quality corundum grinding bits
1 x Diamond Cutting Discs
1 x Steel brushes
1 x Cross-recess Screwdrivers 0
1 x High quality corundum grinding bits
1 x Flat nose pliers 45º EUROline-Conductive
1 x Round nose pliers 45º EUROline-Conductive
1 x ESD-handling ser 9-361
2 x Diamond Cutting Discs
1 x ESD-handling set
1 x Snipe nose pliers 45º EUROline-Conductive
1 x BIT-SET
2 x Table Saw TKS 2500 SC
1 x Fibre-Cut Discs
2 x Five piece HSS chisel set
1 x Treated muslin polishing wheel, stiff (100 x 15mm)
1 x High quality corundum grinding bits
1 x Fibre-Cut Discs
2 x Three jaw chuck for the lathe DB 250
2 x Independent four jaw chuck for the DB 250
2 x Blade holders for DS 460
1 x End side cutters EUROline-Conductive
2 x Hot wire cutter THERMOCUT 230/E
2 x Screwdriver bit set. 49-piece.
1 x MICROMOT steel collet set
1 x Protective device for hand-operated MICROMOT
1 x Cotton polishers
1 x Multipurpose Vices Primus 75
1 x replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x High quality corundum grinding bits
1 x Tungsten carbide cutters set
1 x Three-jaw steel drill chuck
1 x High quality corundum grinding bits
1 x lathe tools 10mm
1 x Sanding bands 14x13mm
1 x Mini side cutters EUROline-Conductive
1 x Cotton polishers
1 x Lathe tools 8mm pastilhados
1 x Cotton polishers
1 x Drill chuck with sliding sleeve for the tailstock
1 x Felt polishers
1 x High quality corundum grinding bits
2 x Angle cutter 45 °
1 x Cross-recess Screwdrivers Pozidriv 1
1 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x Universal and oil siphoning pump AP 12
1 x Screwdriver 3.0
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x Coarse-toothed (25 TPI per 25mm)
1 x Coarse-toothed (18 TPI per 25mm)
1 x Screwdriver 4.0
1 x Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x Super safety and specialty bit set, 75-piece
1 x Screwdriver 5.5
1 x Cross-recess Screwdrivers Pozidriv 2
1 x Coarse-toothed (10 TPI per 25mm)
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x Screwdriver 5.5
1 x Self-adhesive silicone film for easy sanding disc replacement
1 x Compact workshop vacuum cleaner CW-matic
1 x HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x Collet Set for accurate use on round components
1 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x Centre Turning Attachment
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x Cone shaped milling cutter
1 x Combi cutter 6.5/2.5mm
1 x Brass brushes
1 x Blade for Steel and brass
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x Diamond Cutting Discs
1 x Slot cutter 5.0mm
1 x Rounding over cutter 6.4mm
2 x Diamond cutting blade for OZI
2 x Flexible silicon discs
1 x Replacement cutting disc for MICRO cutter MIC
1 x Solid carbide stylus for engraving
1 x Lambswool polishing disc
1 x Sanding pads for OZI 220/E grit 80
1 x V-slot cutter 6.5mm
1 x Grinding mop cylinder grit 80
1 x Bench drill press TBH
1 x Grinding mop cylinder grit 120
1 x Diamond Twist Drills
1 x Four Jaw Chuck
2 x Diamond Grinding Bits 5mm
1 x Sanding fleece for LWS
1 x Core box bit 3.2mm
1 x Glass fibre contact cleaner brush
1 x Table Sawr TKS 315 E
1 x Super-Cut
1 x Diamond blade for MBS 240/E
1 x Solid carbide stylus for engraving
1 x Grinding and Polishing Machine SP/E
1 x Diamond Cutting Discs
1 x Diamond Grinding Bits 1,8mm
1 x Sanding fleece for LWS
2 x Diamond Grinding Bits 1,8mm
1 x Disc cutters
1 x Slot cutter 6.5mm
1 x Disc Sander TG 250/E
1 x Fluted filter for CW-matic
1 x Edge cutter with pin 6.4mm
1 x Rebating cutter 6.4mm
1 x Disc Sander TG 125/E
1 x Cylindrical cutters
€9,409.05
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
PROXXON
PROXXON Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook