| 1 x | Polishing Set |
| 1 x | Micro Compound Table KT 70 |
| 3 x | Table Saw TKS 2500 SC |
| 1 x | Chuck for TBM 220 |
| 2 x | Band knife of hardened spring band steel (without teeth) |
| 1 x | Independent four jaw chuck for the DB 250 |
| 2 x | Bandsaw blade of bimetal for MBS 240/E |
| 1 x | Super safety and specialty bit set, 75-piece |
| 1 x | Universal and oil siphoning pump AP 12 |
| 1 x | Jig saw blades made of HSS |
| 1 x | Extra narrow bandsaw blade (3.5mm) for tight radii |
| 1 x | Drill chuck with sliding sleeve for the tailstock |
| 1 x | Long neck angle grinder LHW |
| 1 x | Screwdriver bit set. 49-piece. |
| 1 x | Supercut jig saw blades of special steel |
| 1 x | Grinding and Polishing Machine SP/E |
| 1 x | Blade for Steel and brass |
| 2 x | Tungsten Carbide Tipped (TCT) |
| 2 x | Machine Vice MS 4 |
| 1 x | HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI |
| 1 x | Disc Sander TG 250/E |
| 1 x | Diamond blade for MBS 240/E |
| 1 x | Cutting disc, with reinforcement |
| 1 x | Five piece HSS chisel set |
| 2 x | Belt sander BBS/S |
| 1 x | Delta sander OZI/E |
| 1 x | Blade guides separately |
| 1 x | Step clamps made of steel |
| 1 x | Blade for Wood and Plastics |
| 1 x | Angle polisher WP/E |
| 1 x | Three jaw chuck for the lathe DB 250 |
| 1 x | Polishing machine PM 100 |
| 1 x | Disc Sander TG 125/E |
| 1 x | Tungsten carbide cutters set |
| 2 x | Belt sander BS/E |
| 2 x | Precision steel vice PM 40 |
| 1 x | Pensander PS 13 |
| 1 x | Self-adhesive silicone carbide sanding discs for TSG 250/E |
| 1 x | Brass contact cleaner brush |
| 1 x | Coarse-toothed blades (No. 3: 34 teeth per 25mm) |
| 1 x | Diamond Coated |
| 1 x | Compact workshop vacuum cleaner CW-matic |
| 1 x | Rounding over cutter 6.4mm |
| 1 x | sanding belts for BBS/s Grit 240 |
| 1 x | TU 2404 |
| 1 x | Corundum sanding discs for LWS |
| 1 x | MICRO Heat gun MH 550 |
| 1 x | Self-adhesive white corundum sanding discs for TG 250/E |
| 1 x | Complete Engraving Kit with trial glass |
| 1 x | Microfibre polishing wheel, 15-ply (100mm) |
| 2 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
| 1 x | MICROMOT 50/E |
| 1 x | Corundum fan sander for LWS |
| 1 x | Diamond-coated cutting and roughing disc |
| 1 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
| 1 x | MICRO Miller FF 230 |
| 1 x | Half round cutter 13mm |
| 1 x | Super-Cut |
| 2 x | 10-piece wood router cutter set |
| 1 x | 6-piece TORX-screwdriver-set ESD |
| 1 x | Bench drill press TBH |
| 1 x | Corundum grinding disc for LWS |
| 1 x | MICROMOT 230/E |
| 1 x | Self-adhesive white corundum sanding discs for TG 125/E |
| 1 x | Corundum grinding disc for LWS |
| 1 x | MICROMOT 50/EF |
| 1 x | MICROFLAM gas soldering set MGS |
| 1 x | Felt cloth polishing disc (100 x 15mm) |
| 1 x | Combi cutter 6.5/2.5mm |
| 1 x | Rebating cutter 6.4mm |
| 1 x | Self-adhesive white corundum sanding discs for TG 250/E |
| 1 x | Self-adhesive white corundum sanding discs for TG 125/E |
| 1 x | Precision Drill/Grinder FBS 240/E |
| 1 x | V-slot cutter 6.5mm |
| 1 x | Slot cutter 6.5mm |
| 1 x | Universal holder UHZ |
| 1 x | Slot cutter 3.2mm |
| 1 x | Precision drill grinder FBS 12/EF |
| 1 x | Sanding fleece for LWS |
| 1 x | ACCENT SERVICE TOOLS SET |
| 1 x | 6-piece set of ESD/EGB tweezers |
| 1 x | Self-adhesive white corundum sanding discs for TG 125/E |
| 1 x | sanding belts for BBS/s Grit 150 |
| 1 x | Long neck angle milling/drilling unit LWB 220/E |
| 2 x | Angle cutter 45 ° |
| 2 x | Table Sawr TKS 315 E |
| 1 x | Professional Drill/Grinder IBS/E |
| 1 x | MICROMOT 50 |
| 1 x | 6-piece screwdriver and cross-recess set ESD |
| 1 x | Mill/Drill System BFW 40/E |
| 1 x | MICROMOT glue gun HKP 220 |
| 1 x | Sanding fleece for LWS |
| 1 x | Self-adhesive white corundum sanding discs for TG 250/E |
| 1 x | Core box bit 3.2mm |
| 1 x | Self-adhesive silicone film for easy sanding disc replacement |
| 1 x | Corundum sanding discs for LWS |
| 1 x | Corundum bound cutting disc for LWS |
| 1 x | Long neck straight drill/grinder LB/E |
| 1 x | sanding belts for BBS/s Grit 80 |
| 1 x | 6-piece socket wrenches ESD |
| 1 x | MICRO Miller FF 500 |
| 1 x | 6-piece screwdriver set ESD |
| 1 x | Bench drill machine TBM 220 |
| 1 x | MICRO Miller MF 70 |
| 2 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
| 1 x | |
| 2 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
| 2 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
| 1 x | MICRO Screwdriver MIS 1. Complete with 16 inserts. |
| 1 x | Edge cutter with pin 6.4mm |
| 1 x | 6-piece wrench key set ESD |
| 1 x | MICRO-screwdrivers |
| 1 x | Tungstein carbide rasp - and cutting disc |
| 1 x | Engraving tool GG |
| 1 x | Slot cutter 5.0mm |
| 2 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
| 1 x | Corundum fan sander for LWS |
| 2 x | Backing disc for LWS |
| 1 x | Router base OFV |
| 1 x | Rasp plate with metal burrs made from wolfram carbide for LWS |
| 1 x | Universal polishing paste |
| 1 x | MICROFLAME burner MFB/E |
| 3 x | Inspector mirror |
| 4 x | BIT-SET |
| 1 x | Table Saw FET |
| 1 x | Precision quick-action drill chuck 0-8mm B16 |
| 1 x | Three piece thread cutting set |
| 2 x | MICROMOT Mains Adapter NG 5/E |
| 1 x | Morse taper MT2 - B16 |
| 1 x | MICRO cutter MIC |
| 1 x | Multipurpose Vices Primus100 |
| 1 x | MICROMOT Mains Adapter NG 2/E |
| 1 x | CM2 - B16 - M10 |
| 1 x | 3-jaw chuck centrically clamping 125mm |
| 1 x | Precision quick-action drill chuck 0-10mm B16 |
| 1 x | 4-jaw chuck individually clamping 125mm |
| 1 x | MICRO shaper MP 400 |
| 2 x | MICROMOT Mains Adapter NG 2/S |
| 1 x | 4-jaw chuck individually clamping 80mm |
| 1 x | centrically clamping 100mm |
| 1 x | Precision quick-action drill chuck 0-16mm B16 |
| 1 x | Multipurpose Vices Primus 75 |
| 1 x | Replacement belts for BSL 220/E |
| 1 x | Replacement belts for BSL 220/E |
| 1 x | Spare cutting wire |
| 1 x | HSS boring tool set, 6 pieces |
| 1 x | Jig saw STS 12/E |
| 1 x | Motor-driven carving device MSG |
| 1 x | Replacement belts for BSL 220/E |
| 1 x | Replacement belts for BSL 220/E |
| 1 x | Cutting tools of high quality cobalt HSS steel, ground |
| 1 x | Precision Vice FMS 75 |
| 1 x | Super jig saw STS/E |
| 1 x | Precision Vice FMZ |
| 1 x | Scroll saw DS 230/E |
| 1 x | Precision quick-action drill chuck 0-10mm B16 |
| 1 x | Surface planer AH 80 |
| 1 x | Thicknesser DH 40 |
| 1 x | centrically clamping 125mm |
| 1 x | Replacement cutting wire for the THERMOCUT 12/E |
| 2 x | Polishing felt, medium hard |
| 1 x | Morse taper MT3 - B16 |
| 1 x | 3-jaw chuck centrically clamping 80mm |
| 1 x | Cutting tools of high quality cobalt HSS steel, ground |
| 1 x | Lathe System PD 400 |
| 1 x | 3-jaw chuck centrically clamping 160mm |
| 1 x | 4-jaw chuck individually clamping 100mm |
| 1 x | Precision magnetic gauge stand |
| 1 x | Dial gauge |
| 1 x | MICRO woodturning lathe DB 250 |
| 1 x | Footswitch FS |
| 1 x | MICRO Band Saw MBS 240/E |
| 2 x | Bench Circular Saw KS 230 |
| 2 x | 2-speed scroll saw DSH |
| 1 x | Precision quick-action drill chuck 0-13mm B16 |
| 1 x | Spiral blade. 125mm long with plain ends (without pins). |
| 1 x | Professional polishing sponge |
| 1 x | Fine dust paper filter for CW-matic |
| 1 x | sandpaper for PS 13 Grot 180 |
| 1 x | Saw blade made of high-alloy special steel |
| 1 x | Super-fine sanding discs grain 2000 |
| 1 x | 14-piece parallel supports set |
| 1 x | Coarse-toothed (25 TPI per 25mm) |
| 1 x | Coarse-toothed (18 TPI per 25mm) |
| 1 x | Ball shaped milling cutters |
| 1 x | Ball-shaped diamond coated 2.2mm |
| 1 x | Inpection mirror 1-978 |
| 1 x | Coarse-toothed (10 TPI per 25mm) |
| 1 x | Replacement cutting disc for MICRO cutter MIC |
| 1 x | sandpaper for PS 13 Grit 400 |
| 1 x | Super-fine sanding discs grain 000 |
| 1 x | Fixed Steady |
| 1 x | Ball-shaped diamond coated 1.2mm |
| 1 x | Solid carbide saw blade |
| 1 x | Replacement glue sticks for HKP 220 |
| 1 x | Professional set for finish grinding and polishing |
| 1 x | Diamond-coated cutting disc for MIC |
| 1 x | Super-fine sanding discs grain 400 |
| 1 x | Radius Cutting Attachment, complete with pointed tool |
| 1 x | Diamond blade |
| 1 x | Ball-shaped diamond coated 3.2mm |
| 1 x | Collet Set for accurate use on round components |
| 1 x | Aluminium Die-Cast |
| 1 x | ROTARY COAXIAL CABLE STRIPPER 3-STEPS |
| 1 x | Centre Turning Attachment |
 |
| €24,605.27 |
