€172.75 + VAT

Compact workshop vacuum cleaner CW-matic
[27490]

Compact workshop vacuum cleaner
CW-matic

The vacuum cleaner runs as long as the machine runs. There is a follow-up time of 5 seconds after switching off the power tool.

Smooth operation with high suction capacity. With large fluted filter made of POLYPROPYLENE to be cleaned and washed manually. Additional fine dust paper filter (not essential for this function). Container is easily emptied by removing the appliance lid with the motor unit. Blowing function available by refitting the vacuum hose. Also suitable for vacuuming liquids. Complete with 3.5m vacuum hose, 2-part aluminium vacuum pipe (98cm), floor nozzle, brush nozzle, crevice nozzle and adapter for connection to standard adapter of all such equipped PROXXON machines. Practical holder for the suction connection included (description on the left). Supplied with 6 fine dust paper filters.

Technical data:
220 - 240V. 1,100W. Connection for electric tools from 25 to 2,000W.
Container 18l. With 5m connection cable.

Reviews

Shopping Cart

1 x	Glass fibre contact cleaner brush
2 x	Round nose pliers 45º EUROline-Conductive
2 x	BIT-SET
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	PLCC Extractor
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Plastic magnifying glass
1 x	Conj 5 pinças ESD
1 x	Crimping plier for BNC
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	ESD-handling set
2 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	Cross-recess Screwdrivers 0
1 x	PRECISION WIRE STRIPPER ESD-PLUS
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	PLCC Puller
1 x	ESD-handling ser 9-361
1 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x	Precision caliper square
1 x	Contact bracelet with spiral cord
1 x	Brass contact cleaner brush
1 x	6-piece socket wrenches ESD
1 x	6-piece set of ESD/EGB tweezers
1 x	6-piece TORX-screwdriver-set ESD
1 x	6-piece screwdriver and cross-recess set ESD
1 x	6-piece screwdriver set ESD
1 x	ACCENT SERVICE TOOLS SET
1 x	6-piece wrench key set ESD
1 x	Screwdriver 0.8
1 x	Cross-recess Screwdrivers 1
1 x	Screwdriver 1.5
1 x	Screwdriver 1.2
1 x	Screwdriver 2.5
1 x	Cross-recess Screwdrivers 00
1 x	Cross-recess Screwdrivers 000
1 x	Screwdriver 2.0
1 x	Cross-recess Screwdrivers 2
1 x	Cross-recess Screwdrivers 1
1 x	Screwdriver 1.8
1 x	Cross-recess Screwdrivers 2
1 x	Fluted filter for CW-matic
1 x	Mini side cutters EUROline-Conductive
1 x	Side cutters EUROline-Conductive
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	Mini side cutters EUROline-Conductive
1 x	Mini side cutters EUROline-Conductive
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	End side cutters 45º EUROline-Conductive
1 x	Fine dust paper filter for CW-matic
1 x	V-slot cutter 6.5mm
1 x	MICROMOT extension cord. 300cm.
1 x	Slot cutter 5.0mm
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Edge cutter with pin 6.4mm
2 x	Dividing attachment TA 230 for PF 250
1 x	10-piece wood router cutter set
1 x	Aluminium Die-Cast
1 x	Micro Compound Table KT 70
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Half round cutter 13mm
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Slot cutter 3.2mm
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Flexishaft MICROMOT 110/P
1 x	Rebating cutter 6.4mm
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Mill/Drill Unit BFB 2000.
2 x	Three-jaw steel drill chuck
1 x	Jig saw blades made of HSS
1 x	MICROMOT tool holder
1 x	Footswitch FS
1 x	Core box bit 3.2mm
1 x	Blade for Steel and brass
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	14-piece parallel supports set
1 x	Angle cutter 45 °
1 x	Rounding over cutter 6.4mm
1 x	Protective device for hand-operated MICROMOT
1 x	Supercut jig saw blades of special steel
1 x	MICROMOT drill stand MB 200
1 x	Combi cutter 6.5/2.5mm
1 x	Diamond blade for MBS 240/E
1 x	Slot cutter 6.5mm
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	MICROMOT steel collet set
1 x	Flexishaft MICROMOT 110/BF
1 x	Blade guides separately
1 x	Blade for Wood and Plastics
1 x	sanding belts for BBS/s Grit 80
1 x	Replacement glue sticks for HKP 220
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Replacement belts for BSL 220/E
1 x	Universal and oil siphoning pump AP 12
1 x	Grinding mop cylinder grit 120
1 x	Diamond-coated cutting disc for MIC
1 x	Flap Wheels
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Grinding mop cylinder grit 80
1 x	Super-Cut
1 x	Engraving tool GG
1 x	Pensander PS 13
1 x	Chuck for TBM 220
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Router base OFV
1 x	Grinding mop cylinder grit 120
1 x	Independent four jaw chuck for the DB 250
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	sanding belts for BBS/s Grit 240
1 x	Step clamps made of steel
1 x

€3,450.82