€109.00 + VAT

Angle polisher WP/E
[28660]

For perfect surfaces even in tight spots: Finishing o f blank surfaces, cleaning, rust removal, for the finishing touches after varnishing. Balanced, powerful, quiet and long-lasting special DC motor. Quiet planetary gear in die-cast aluminium housing and continuously variable speed control (full-wave electronics) for low and constant speeds even during high contact pressure. Main housing of glass-fibre reinforced POLYAMIDE with soft component. Securely stored in stylish case made of high-grade polypropylene with original equipment for immediate use. Rubber backing disc with hook and loop fastening, polishing sponge (medium hard), lambswool polishing disc, polishing felt for metals and non-ferrous metals (medium hard), 12 sanding discs K 2000 and NIGRIN polishing emulsion (75ml) as well as a microfibre cloth. Technical data: 220 - 240V. 100W. 800 - 2.500rpm. Length 270mm. Weight 720g. Class 2 insulation.

Reviews

Customers who bought this product also purchased

Super-fine sanding discs grain 2000	Professional polishing sponge	Supercut jig saw blades of special steel
Jig saw blades made of HSS	Pensander PS 13	MICRO Heat gun MH 550

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Corundum grinding disc for LWS
1 x	Hot wire cutter THERMOCUT 12/E
2 x	Flexible silicon discs
3 x	Disc Sander TG 250/E
1 x	Backing disc for LWS
1 x	Diamond Cutting Discs
3 x	Delta sander OZI/E
1 x	Dividing attachment TA 230 for PF 250
3 x
3 x	Flexible polishing pad set
1 x	Corundum grinding disc for LWS
2 x	Cylinder sander WAS/E
1 x	Flexible silicon discs
1 x	Professional set for finish grinding and polishing
2 x	Angle cutter 45 °
2 x	Three jaw chuck for the lathe DB 250
2 x	Replacement belts for BSL 220/E
1 x	Diamond-coated cutting and roughing disc
1 x	Flap Wheels
2 x	Treated muslin polishing wheel, stiff (100 x 15mm)
2 x	High quality corundum grinding bits
1 x	Diamond Cutting Discs
2 x	High quality corundum grinding bits
1 x	Sanding bands 14x13mm
2 x	Band knife of hardened spring band steel (without teeth)
3 x	High quality corundum grinding bits
2 x	Fluted filter for CW-matic
1 x	Thicknesser DH 40
1 x	Sanding bands 14x13mm
2 x	High quality corundum grinding bits
1 x	Corundum sanding discs for LWS
1 x	High quality corundum grinding bits
1 x	Diamond Coated
3 x	Belt sander BS/E
1 x	Fine dust paper filter for CW-matic
3 x	Angle polisher WP/E
1 x	Diamond Cutting Discs
1 x	Polishing Set
1 x	Felt polishers
3 x	Grinding and Polishing Machine SP/E
2 x	Centre Turning Attachment
1 x	Flap Wheels
1 x	Polishing paste
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Aluminium Die-Cast
2 x	Belt sander BBS/S
1 x	Contact bracelet with spiral cord
1 x	2-speed scroll saw DSH
1 x	Earth wire
1 x	Beeprog2C
1 x	Crocodile clip
2 x	Polishing machine PM 100
1 x	Earth wire with dummy Schunko-plug
1 x	Chuck for TBM 220
1 x	End side cutters 45º EUROline-Conductive
1 x	Grinding mop cylinder grit 120
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	ESD-handling ser 9-361
1 x	MICROMOT steel collet set
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Ball-shaped diamond coated 2.2mm
2 x	Replacement glue sticks for HKP 220
1 x	Ball-shaped diamond coated 1.2mm
1 x	Milling cutter set (2 - 5mm)
1 x	Footswitch FS
1 x	Grinding mop cylinder grit 120
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Bench drill machine TBM 220
1 x	Mini side cutters EUROline-Conductive
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	Milling cutter set (6 - 10mm)
1 x	Stainless steel cups
1 x	Fibre-Cut Discs
1 x	EUROline-Conductive set of pliers
1 x	Flexible silicon discs
1 x	Earthing module
1 x	Fibre-Cut Discs
1 x	HSS boring tool set, 6 pieces
1 x	Mini side cutters EUROline-Conductive
1 x	HSS twist drill set with centring pin
1 x	Steel cups
1 x	Router base OFV
1 x	Stainless steel wheels
1 x	Earth wire
1 x	Bench Circular Saw KS 230
1 x	Pensander PS 13
1 x	Grinding mop cylinder grit 80
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Fibre-Cut Discs
1 x	Three-jaw steel drill chuck
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	Fibre-Cut Discs
1 x	10-piece wood router cutter set
1 x	Disc Sander TG 125/E
1 x	Gear Chuck
1 x	Mini side cutters EUROline-Conductive
1 x	Half round cutter 13mm
2 x	Long neck angle grinder LHW
1 x	Engraving tool GG
1 x	14-piece parallel supports set
1 x	Stainless steel brushes
1 x	Flexishaft MICROMOT 110/BF
1 x	Ball-shaped diamond coated 3.2mm
1 x	Five piece HSS chisel set
1 x	Flexishaft MICROMOT 110/P

€7,606.19