€56.00 + VAT

MICROMOT Mains Adapter NG 5/E
[28704]

MICROMOT Mains Adapter NG 5/E

In compact NORYL casing (recommended for transformers). With superior capacity of 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Master switch for turning off transformer without needing to unplug. Red LED indicates "ready". PTC protection against overload (plugged-in machine will not restart automatically). Modern design with storage holes for tools with 2.35 mm and 3 mm shafts. Foldable tool rest provides a secure place for keeping the MICROMOT tool at the ready.

Technical Data:
Capacity: 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Primary supply 220/240 Volt. Thyristor electronic speed control (with feedback) for optimum tool speed and high torque at low speeds. 3 polarised sockets for MICROMOT machines. 1 pair of sockets for standard banana plugs (4 mm diameter).

Reviews

Customers who bought this product also purchased

MICRO Screwdriver MIS 1. Complete with 16 inserts.	MICROMOT extension cord. 300cm.	Hot wire cutter THERMOCUT 230/E
MICROFLAME burner MFB/E	Spare cutting wire	Replacement cutting wire for the THERMOCUT 12/E

Shopping Cart

1 x	Blade for Wood and Plastics
1 x	Long neck angle grinder LHW
1 x	Lambswool polishing disc
1 x	Fibre-Cut Discs
1 x	MICRO Miller FF 230
1 x	MICRO Miller FF 500
1 x	Metal Cutting Blades
1 x	Lathe System PD 400
1 x	Machine Vice MS 4
1 x	Micro Compound Table KT 70
1 x	MICRO Heat gun MH 550
1 x	Jig saw blades made of HSS
2 x	HSS immersion saw blades for OZI
1 x	Jig saw STS 12/E
1 x	Independent four jaw chuck for the DB 250
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	MICRO Miller MF 70
1 x	MICRO Band Saw MBS 240/E
1 x	HSS twist drill set with centring pin
1 x	Long neck straight drill/grinder LB/E
1 x	Corundum fan sander for LWS
1 x	Super-fine sanding discs grain 2000
1 x	MICRO shaper MP 400
1 x	Felt polishers
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Long neck angle milling/drilling unit LWB 220/E
1 x	MICRO cutter MIC
1 x	HSS drill bits 1.6mm
1 x	MICROMOT 50
1 x	Hot wire cutter THERMOCUT 650
1 x	DIL28W/SOIC28 ZIF 300mil
1 x	Microfibre cloth
1 x	Fibre-Cut Discs
1 x	HSS drill bits 0.8mm
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	sanding belts for BBS/s Grit 150
1 x	Five piece HSS chisel set
1 x	HSS boring tool set, 6 pieces
1 x	DIL3/SOT23-3 ZIF-CS
1 x	HSS cutting blade for OZI
1 x	MICROMOT glue gun HKP 220
1 x	Felt polishers
1 x	Rebating cutter 6.4mm
1 x	Fibre-Cut Discs
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Replacement belts for BSL 220/E
1 x	sanding belts for BBS/s Grit 80
1 x	DIL8W/SOIC8 ZIF 150mil
2 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
2 x	HSS immersion saw blades for OZI
1 x	DIL24W/SOIC24 ZIF 300mil
1 x	Replacement belts for BSL 220/E
1 x	MICROMOT 50/E
1 x	DIL8/SOIC8-1 ZIF 170mil
1 x	DIL32/SOIC32 ZIF 445mil
1 x	MICROFLAM gas soldering set MGS
1 x	High quality corundum grinding bits
1 x	Router base OFV
1 x	HSS drill bits 0.5mm
1 x	MICROMOT Mains Adapter NG 2/E
2 x	High quality corundum grinding bits
1 x	sanding belts for BBS/s Grit 240
1 x	Protective device for hand-operated MICROMOT
1 x	HSS drill bits 1.2mm
1 x	DIL20/SOIC20 ZIF 200mil
1 x	MICROMOT drill stand MB 200
1 x	Replacement belts for BSL 220/E
1 x	MICROFLAME burner MFB/E
1 x	High quality corundum grinding bits
1 x	Fine dust paper filter for CW-matic
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Hot wire cutter THERMOCUT 12/E
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Sanding Discs
1 x	Replacement glue sticks for HKP 220
1 x	MICROMOT extension cord. 300cm.
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	DIL8W/SOIC8 ZIF 200mil
1 x	Replacement belts for BSL 220/E
1 x	Sanding bands 14x13mm
2 x	High quality corundum grinding bits
1 x	MICRO-screwdrivers
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	DIL8/SOIC8 ZIF 200mil
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Diamond Cutting Discs
1 x	Replacement carving blades for MSG
1 x	MICRO woodturning lathe DB 250
1 x	MICROMOT tool holder
1 x	MICROMOT 50/EF
1 x	Fibre-Cut Discs
1 x	Sanding bands 14x13mm
1 x	High quality corundum grinding bits
1 x	Steel brushes
1 x	HSS twist drill set to DIN 338
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	MICROMOT steel collet set
1 x	Rounding over cutter 6.4mm
1 x	Mill/Drill Unit BFB 2000.
1 x	Sanding pads for OZI 220/E grit 240
1 x	DIL48/SOIC20 ZIF LPC-1
1 x	Fibre-Cut Discs
1 x	Diamond Cutting Discs
1 x	MICROMOT 230/E
1 x	HSS drill bits 1.0mm
1 x	Mill/Drill System BFW 40/E
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Replacement cutting wire for the THERMOCUT 12/E

€8,811.56