€73.98 + VAT

MICRO Screwdriver MIS 1. Complete with 16 inserts.
[28690]

MICRO Screwdriver MIS 1. Complete with 16 inserts.

With torque adjustable from 0.35 - 2.0 Nm. Quiet, light and with sensitive clutch. Used in electronic assembly lines, machine assembly and by model builders and clock makers.

The three stage planetary gearbox offers a reduction ration of 93:1, yielding the ideal speed of 200 - 250 rpm (depending on mains adapter used). The clutch is adjustable in the range 0.35 to 1.0 Nm in 5 steps. Tightening torques can be selected precisely. The six stage bypasses the clutch and yields approx. 2 Nm. An ideally positioned rocker switch provides on/off/reverse. Fibreglass reinforced NYLON lends high impact resistance to the housing. A Roehm chuck facilitates acceptance of all bit shanks, including 6 mm and 1/4". A 160 cm flexible cord ensures perfect mobility. The rear mounted metal hook is used with the optional balancer.

Available as a complete set, with plastic case and 16 bits (Chrome Molybdenum Steel). Weight 375 g. Overall length: 150 mm. Supplied in durable plastic case with 16 bits. We recommend the use of MICROMOT mains adapters (1.0 A, 12 V) with or without speed control

Note for industrial use:
At torques below 2.0 Nm, the MIS 1 powered screwdriver is superior to tools powered by compressed air. And not only because of low energy costs. It works quietly and is cleaner (no lubricated compressed air escapes into the working place). And its highly flexible spiral cable makes the unit comfortable to use.

Reviews

Customers who bought this product also purchased

MICROMOT Mains Adapter NG 5/E

Super-Cut

Shopping Cart

1 x	Blade holders for DS 460
1 x	Spiral blade. 125mm long with plain ends (without pins).
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Mini side cutters EUROline-Conductive
1 x	Screwdriver bit set. 49-piece.
1 x	Replacement cutting wire for the THERMOCUT 12/E
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	PRECISION WIRE STRIPPER ESD-PLUS
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Side cutters EUROline-Conductive
1 x	End side cutters 45º EUROline-Conductive
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	End side cutters EUROline-Conductive
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Coarse-toothed (10 TPI per 25mm)
2 x	MICROMOT Mains Adapter NG 5/E
1 x	Super safety and specialty bit set, 75-piece
1 x	Universal and oil siphoning pump AP 12
2 x	MICROMOT Mains Adapter NG 2/S
1 x	Coarse-toothed (18 TPI per 25mm)
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	EUROline-Conductive set of pliers
1 x	Snipe nose pliers 45º EUROline-Conductive
2 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
2 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Mini side cutters EUROline-Conductive
1 x	Mini side cutters EUROline-Conductive
1 x	Round nose pliers 45º EUROline-Conductive
1 x	ESD Tweezers 5-192
1 x	Solid carbide saw blade
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	Diamond-coated cutting disc for MIC
1 x	Corundum bound cutting disc for LWS
1 x	Saw blade made of high-alloy special steel
1 x	Corundum grinding disc for LWS
1 x	6-piece screwdriver and cross-recess set ESD
1 x	ESD Brushe
1 x	6-piece wrench key set ESD
1 x	Diamond blade
1 x	Corundum grinding disc for LWS
1 x	ESD Tweezers 5-194
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Corundum fan sander for LWS
1 x	Sanding fleece for LWS
1 x	Corundum sanding discs for LWS
1 x	6-piece socket wrenches ESD
1 x	Diamond-coated cutting and roughing disc
1 x	Crosscut 'Super-Cut' blade
2 x	Backing disc for LWS
1 x	Sanding fleece for LWS
1 x	Tungsten tipped saw blade
1 x	6-piece screwdriver set ESD
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	ESD Tweezers 5-193
1 x	6-piece TORX-screwdriver-set ESD
1 x	ESD Brushe
1 x	ESD Tweezers 5-191
1 x	Conj 5 pinças ESD
1 x	Corundum sanding discs for LWS
1 x	ESD Tweezers 5-195
1 x	Corundum fan sander for LWS
1 x	Tungstein carbide rasp - and cutting disc
1 x	6-piece set of ESD/EGB tweezers
1 x	Universal polishing paste
1 x	Slot cutter 3.2mm
1 x	Edge cutter with pin 6.4mm
1 x	Professional set for finish grinding and polishing
1 x	sandpaper for PS 13 Grit 240
1 x	HSS immersion saw blades for OZI
1 x	Rounding over cutter 6.4mm
1 x	Independent four jaw chuck for the DB 250
1 x	Core box bit 3.2mm
1 x	Sanding pads for OZI 220/E grit 80
2 x	Three jaw chuck for the lathe DB 250
1 x	sandpaper for PS 13 Grit 400
2 x
1 x	Angle cutter 45 °
1 x	Half round cutter 13mm
1 x	Earth wire
1 x	Polishing felt, medium hard
1 x	sanding belts for BBS/s Grit 80
1 x	Contact bracelet with spiral cord
1 x	Sanding pads for OZI 220/E grit 240
1 x	Earth wire with dummy Schunko-plug
1 x	Pinça SOIC de 8 pinos
2 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Super-fine sanding discs grain 400
1 x	Professional polishing sponge
1 x	OPTI BF20L VARIO
1 x	Five piece HSS chisel set
1 x	HSS immersion saw blades for OZI
2 x	Insulation Resistance Tester MG125
1 x	sandpaper for PS 13 Grot 180
1 x	Rebating cutter 6.4mm
1 x	HSS cutting blade for OZI
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Jig saw blades made of HSS
1 x	Crocodile clip
1 x	OPTI BF16 Vario
1 x	Slot cutter 6.5mm
1 x	IC Test clip 20 pins
1 x	10-piece wood router cutter set
1 x	Combi cutter 6.5/2.5mm
1 x	Earth wire
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Microfibre polishing wheel, 15-ply (100mm)
2 x	Insulation Resistance Tester MG500
1 x	Diamond cutting blade for OZI
1 x	V-slot cutter 6.5mm
1 x	Supercut jig saw blades of special steel
1 x	Super-fine sanding discs grain 2000
1 x	Sanding pads for OZI 220/E grit 150
1 x	Slot cutter 5.0mm
1 x	OPTI BF20 VARIO
1 x	sanding belts for BBS/s Grit 240
1 x	sanding belts for BBS/s Grit 150
1 x	Super-fine sanding discs grain 000
1 x	Earthing module
1 x	Microfibre cloth
1 x	Router base OFV
1 x	Flexishaft MICROMOT 110/BF
1 x	Fixed Steady
1 x	Special Fused Alumina (Hardness N).
1 x	Flexishaft MICROMOT 110/P
1 x	Footswitch FS
1 x	MICRO woodturning lathe DB 250
1 x	Protective device for hand-operated MICROMOT
1 x	Three piece thread cutting set
1 x	Silicon-Carbide.
1 x	Chuck for TBM 220
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Floor cover ESD
1 x	Aluminium Die-Cast
1 x	Mill/Drill Unit BFB 2000.
1 x	Four Jaw Chuck
1 x	Grinding and Polishing Machine SP/E
1 x	Angle polisher WP/E
1 x	MICROMOT tool holder
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Replacement carving blades for MSG
1 x	Replacement glue sticks for HKP 220
1 x	Fine dust paper filter for CW-matic
1 x	HSS boring tool set, 6 pieces
1 x	Grinding mop cylinder grit 120
1 x	Super jig saw STS/E
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	MICROMOT steel collet set
1 x	Blade guides separately
1 x	Micro Compound Table KT 70
1 x	Grinding mop cylinder grit 80
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Engraving tool GG
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Dividing attachment TA 230 for PF 250
1 x	Table Saw FET
1 x	Fluted filter for CW-matic
1 x	Precision lathe PD 250/E
1 x	Collet Set for accurate use on round components
1 x	Step clamps made of steel
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	2-speed scroll saw DSH
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Diamond blade for MBS 240/E
2 x	Pensander PS 13
1 x	Belt sander BBS/S
1 x	Bench Circular Saw KS 230
1 x	Disc Sander TG 125/E
1 x	Three-jaw steel drill chuck
1 x	Blade for Wood and Plastics
1 x	Polishing Set
1 x	MICRO cutter MIC
1 x	Gear Chuck
1 x	Motor-driven carving device MSG
1 x	Centre Turning Attachment
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Flap Wheels

€13,323.07