€104.00 + VAT

Delta sander OZI/E
[28520]

Small yet efficient sander!

For grinding surfaces in very tight spots, e.g. corners, sides and inaccessible areas. The oscillating motion ensures quiet operation and also facilitates cutting. Insert and file! The variable speed facility ensures the correct speed for every material. Special, balanced, low noise DC motor with high life expectancy. Main housing of glass-fibre reinforced POLYAMIDE. Complete with 4 sanding discs (2x 80 grit, 1x 150 grit and 1x 240 grit). In an attractive case.

Technical data:
220 - 240V. 100W. Sanding frequency of 3,000 - 10,000rpm. Length 230mm. Weight 550g. Insulated to class 2.

Reviews

Customers who bought this product also purchased

HSS cutting blade for OZI	HSS immersion saw blades for OZI	sandpaper for PS 13 Grit 400
HSS immersion saw blades for OZI	sandpaper for PS 13 Grit 240	Sanding pads for OZI 220/E grit 80

Shopping Cart

2 x	Vacum SAA 901
1 x	Mill/Drill Unit BFB 2000.
1 x	MICROMOT drill stand MB 200
1 x	Protective device for hand-operated MICROMOT
2 x	Table Sawr TKS 315 E
1 x	MICROMOT tool holder
2 x	Flexishaft MICROMOT 110/P
1 x	Micro Compound Table KT 70
1 x	Three-jaw steel drill chuck
1 x	MICROMOT extension cord. 300cm.
1 x	Wood Lathe DB900
1 x	Super-fine sanding discs grain 400
1 x	Super-fine sanding discs grain 000
1 x	Replacement belts for BSL 220/E
1 x	Lambswool polishing disc
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Super-fine sanding discs grain 2000
1 x	Professional set for finish grinding and polishing
1 x	Polishing felt, medium hard
1 x	Professional polishing sponge
1 x	Microfibre cloth
1 x	Lathe System PD 400
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Flexible silicon discs
1 x	Fluted filter for CW-matic
1 x	Blade guides separately
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Gear Chuck
1 x	Replacement belts for BSL 220/E
1 x	Flexible silicon discs
1 x	Grinding mop cylinder grit 80
1 x	Blade holders for DS 460
1 x	Flexible silicon discs
1 x	Combi cutter 6.5/2.5mm
1 x	High quality corundum grinding bits
1 x	Collet Set for accurate use on round components
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Flexible polishing pad set
1 x	Flap Wheels
1 x	Centre Turning Attachment
1 x	Blade for Wood and Plastics
1 x	Grinding and Polishing Machine SP/E
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Four Jaw Chuck
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Cone shaped milling cutter
1 x	Flap Wheels
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Grinding mop cylinder grit 120
1 x	Chuck for TBM 220
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Complete Engraving Kit with trial glass
1 x	Grinding mop cylinder grit 240
1 x	Half round cutter 13mm
1 x	Flexible polishing pad set
1 x	Grinding mop cylinder grit 120
1 x	Footswitch FS
1 x	Brass brushes
1 x	Diamond-coated cutting disc for MIC
1 x	Fibre-Cut Discs
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Felt polishers
1 x	Edge cutter with pin 6.4mm
1 x	Diamond blade for MBS 240/E
1 x	Delta sander OZI/E
1 x	Wood Lathe DB450
1 x	Fibre-Cut Discs
1 x	Diamond-coated cutting and roughing disc
1 x	Cutting disc, with reinforcement
1 x	surface planing and thicknessing ADH 250

€6,447.55