End side cutters 45º EUROline-Conductive, Oficina-digital.com

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Broca de alta duração de 3.0mm
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Machine Vice MS 4
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Felt polishers
1 x	4-jaw chuck individually clamping 80mm
3 x	MICROMOT Mains Adapter NG 2/S
3 x	MICROMOT Mains Adapter NG 5/E
1 x	Milling cutter set (6 - 10mm)
1 x	Combi cutter 6.5/2.5mm
1 x	Milling cutter set (2 - 5mm)
1 x	Silicon-Carbide.
1 x	centrically clamping 125mm
3 x	MICROMOT Mains Adapter NG 2/E
1 x	Precision quick-action drill chuck 0-13mm B16
1 x	Flap Wheels
1 x	centrically clamping 100mm
1 x	Felt polishers
1 x	Cotton polishers
1 x	Sanding Drums
1 x	Half round cutter 13mm
1 x	Felt polishers
1 x	sandpaper for PS 13 Grit 400
1 x	Diamond Cutting Discs
1 x	Precision quick-action drill chuck 0-16mm B16
2 x	Drill chuck with sliding sleeve for the tailstock
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	3-jaw chuck centrically clamping 160mm
1 x	Diamond Grinding Bits 5mm
1 x	10-piece wood router cutter set
1 x	Super-Cut
1 x	Polishing paste
1 x	3-jaw chuck centrically clamping 100mm
1 x	Sanding Drums
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Sanding Discs
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Morse taper MT2 - B16
1 x	Insulation Resistance Tester MG500
1 x	Angle cutter 45 °
1 x	Flexible silicon discs
1 x	Special Fused Alumina (Hardness N).
1 x	Diamond Grinding Bits 1,8mm
2 x	Grinding mop cylinder grit 240
1 x	CM2 - B16 - M10
1 x	Flap Wheels
1 x	Nylon Fleece Brushes
2 x	Independent four jaw chuck for the DB 250
1 x	Felt polishers
1 x	Dial gauge
1 x	Insulation Resistance Tester MG125
1 x	Sanding bands 14x13mm
1 x	Flexible polishing pad set
1 x	Grinding mop cylinder grit 120
1 x	Diamond Cutting Discs
1 x	Polishing Set
1 x	Sanding Drums
1 x	V-slot cutter 6.5mm
1 x	Diamond Cutting Discs
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	Diamond Coated
1 x	Slot cutter 3.2mm
1 x	Tungsten Carbide Tipped (TCT)
1 x	Flexible silicon discs
1 x	Ball-shaped diamond coated 1.2mm
1 x	Cotton polishers
1 x	4-jaw chuck individually clamping 100mm
1 x	Ball-shaped diamond coated 3.2mm
1 x	Flexible silicon discs
1 x	Morse taper MT3 - B16
1 x	Edge cutter with pin 6.4mm
1 x	Rounding over cutter 6.4mm
1 x	Diamond Cutting Discs
1 x	Sanding Drums
1 x	Diamond Grinding Bits 1mm
1 x	Core box bit 3.2mm
1 x	4-jaw chuck individually clamping 125mm
1 x	Cotton polishers
1 x	Precision quick-action drill chuck 0-8mm B16
1 x	Rebating cutter 6.4mm
1 x	sandpaper for PS 13 Grot 180
1 x	Grinding mop cylinder grit 80
1 x	Slot cutter 6.5mm
1 x	Cutter head for copy and surface milling MT3
2 x	Footswitch FS
1 x	EUROline mini side cutter
1 x	Side cutters 160mm
1 x	Mill/Drill Unit BFB 2000.
1 x	Cross-recess Screwdrivers 1
1 x	2-speed scroll saw DSH
1 x	Super-fine sanding discs grain 000
1 x	MICRO woodturning lathe DB 250
1 x	Scroll saw DS 230/E
1 x	MICROMOT tool holder
1 x	Sanding pads for OZI 220/E grit 240
1 x	Protective device for hand-operated MICROMOT
1 x	Mini side cutters EUROline-Conductive
1 x	Mini side cutters EUROline-Conductive
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Side cutters 170mm

€3,906.34