Top » Catalog » BERNSTEIN » 4-561

€189.50 + VAT

TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
[4-561]

TORQUE-SCREWDRIVER EUROLINE-POWER

Ergonomical formed two-coloured-components handle

Handle: impact-resistant, two-coloured plastic, with slip off protection and practical hanging up hole.

clear legible micrometer scale for a precise and perfect setting, torque adjusting without setting gauge

Torque mechanism: wear-resistant mechanism from hardened special steel, audible and touchable release signal

Lock mechanism: secure locking device by lock mechanism ( lock point = vernier line )

Actuating mechanism: system with changeable blades, left tightening with more or less unlimited removing, right tightening with adjusted torque.

Torque screwdrivers can be recalibrated and are in accordance with EN ISO 6789:2003

Torque-Screwdriver

Measure range Nm: 0.5 - 1.5
Scale Nm: 0.25
Fine scale mm: 0.05
Drive inner hexagon mm: 4
Length mm: 153
Weight: 137 g

Reviews

Customers who bought this product also purchased

ESD Tweezers 5-194

ANTISTATIC 200ml

TORX-screwdrivers T9

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
3 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	MICRO Miller FF 500
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Crimping plier for BNC
1 x	Combi cutter 6.5/2.5mm
1 x	Precision lathe PD 250/E
2 x	Replacement glue sticks for HKP 220
1 x	Vacum SAA 901
1 x	Slot cutter 3.2mm
1 x	Mini side cutters EUROline-Conductive
1 x	Component tweezers 5-013
1 x	Mini side cutters EUROline-Conductive
1 x	Side cutters 195mm
1 x	10-piece wood router cutter set
1 x	Combination pliers 185mm
1 x	Combination pliers 210mm
1 x	Ceramic tweezers 5-082
1 x	Side cutters 160mm
1 x	EPROM/Flash-PLCC32-2-DIL32 socket submodule
1 x	ESD Brushe
1 x	Side cutters 170mm
1 x	Angle cutter 45 °
1 x	CRIMPING PLIERS/WIRE STRIPPER
2 x	EUROline mini side cutter
1 x	Edge cutter with pin 6.4mm
1 x	Component tweezers 5-008
1 x	EUROline mini side cutter
1 x	Ceramic-tipped tweezers and ESD 5-096
2 x	Side cutters 160mm
1 x	Combination pliers 170mm
1 x	Slot cutter 6.5mm
1 x	Component tweezers 5-009
1 x	Conj 5 pinças ESD
1 x	Combination pliers 160mm
1 x	Combination pliers 205mm
1 x	Combination pliers 190mm
1 x	Rounding over cutter 6.4mm
1 x	End side cutters 45º EUROline-Conductive
1 x	Side cutters EUROline-Conductive
1 x	Component tweezers 5-007
1 x	Core box bit 3.2mm
1 x	Component tweezers 5-006
1 x	V-slot cutter 6.5mm
1 x	EUROline round nose pliers
1 x	Screwdriver 3.0
1 x	Safety insulated screwdrivers 14-602 VDE
1 x	Stainless steel cups
1 x	Footswitch FS
1 x	ESD Tweezers 5-193
1 x	Safety insulated screwdrivers 14-601 VDE
1 x	EUROline mini side cutter
1 x	Compact workshop vacuum cleaner CW-matic
1 x	EUROline mini side cutter
1 x	Screwdriver 3.0
1 x	Screwdriver 2.5
1 x	Screwdriver 2.5
1 x	Sanding bands 14x13mm
1 x	End side cutters EUROline-Conductive

€4,542.35