End side cutters 45º EUROline-Conductive, Oficina-digital.com

1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Felt polishers
1 x	Fibre-Cut Discs
1 x	4-jaw chuck individually clamping 125mm
1 x	Fixed Steady
1 x	Precision quick-action drill chuck 0-16mm B16
1 x	centrically clamping 125mm
1 x	Fibre-Cut Discs
1 x	Polishing felt, medium hard
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	Felt polishers
1 x	Precision quick-action drill chuck 0-8mm B16
1 x	3-jaw chuck centrically clamping 125mm
1 x	Precision magnetic gauge stand
1 x	Precision quick-action drill chuck 0-13mm B16
2 x	Dividing attachment TA 230 for PF 250
1 x	3-jaw chuck centrically clamping 160mm
1 x	Felt polishers
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Five piece HSS chisel set
1 x	3-jaw chuck centrically clamping 80mm
1 x	3-jaw chuck centrically clamping 100mm
2 x	Engraving tool GG
1 x	Flame shaped milling cutters
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	CM2 - B16 - M10
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Fibre-Cut Discs
1 x	Morse taper MT2 - B16
1 x	4-jaw chuck individually clamping 100mm
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Dial gauge
1 x	Fine dust paper filter for CW-matic
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	4-jaw chuck individually clamping 80mm
1 x	Morse taper MT3 - B16
1 x	centrically clamping 100mm
1 x	Edge cutter with pin 6.4mm
1 x	Fibre-Cut Discs
1 x	Felt polishers
1 x	Fibre-Cut Discs
1 x	Fibre-Cut Discs
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	Chuck for TBM 220
1 x	Polishing Set
1 x	End side cutters 45º EUROline-Conductive
1 x	Independent four jaw chuck for the DB 250
1 x	Mini side cutters EUROline-Conductive
1 x	Flap Wheels
1 x	Side cutters EUROline-Conductive
1 x	PLCC Extractor
1 x	Table Sawr TKS 315 E
1 x	Wood Lathe DB450
1 x	Router base OFV
1 x	Centre Turning Attachment
1 x	Special Fused Alumina (Hardness N).
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Vacum SAA 901
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	End side cutters EUROline-Conductive
1 x	Compact workshop vacuum cleaner CW-matic
1 x
1 x	Tungstein carbide rasp - and cutting disc
1 x	Pensander PS 13
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	Three jaw chuck for the lathe DB 250
1 x	Replacement belts for BSL 220/E
1 x	Silicon-Carbide.
1 x	Three-jaw steel drill chuck
1 x	Replacement glue sticks for HKP 220

€3,828.39