€295.00 + VAT

Insulation Resistance Tester MG125
[MG125]

Insulation Resistance Tester MG125

Allows you to measure insulation resistance more safely by avoiding operation mistakes!!

Hot-line state detection
In any range (MΩ), the hot-line state (30 V minimum) can be detected through the buzzer sound and the red LED illumination. If you press the MEASURE button by mistake in this state, no test voltage will be generated. Thus, the measuring circuit and the equipment involved will not be affected adversely.

Large bolt mark
During the measurement of MΩ, a large bolt mark is illuminated on the LCD with the buzzer sound, allowing you to find that voltage is generated.

More ingenuity
To select the highest test voltage range, you need to turn the rotary switch while holding down the 0Ω ADJ button. This design feature prevents the highest test voltage from being generated by an operation mistake.

Easy to use & tough body
An easy-to-hold body with a portrait design has been adopted to ensure stable measurements. The tester comes with a strap, and uses less slippery elastomeric material for its lateral sides so that the user can grip the tester more firmly.

Automatic data hold
After measurements have been finished, the last measured value can be held automatically. Unlike an analog tester, you do not need to check the reading during measurements and therefore can comfortably concentrate on the object under measurement.

Bargraph just like analog meter
A large logarithmic bar graph is provided to enable the user to check the measured value like using an analog tester.

Large display with backlight
The backlight allows you to check the measured value even in a dark place. Since the rated voltage output can be checked with the green LED, you can find whether the measurement is being carried out properly.

General Specification

MG125 


Reviews
Manufacturers
3 x Diamond blade
3 x Tool holder type H for SWH 1-A
3 x Cutting tools of high quality cobalt HSS steel, ground
2 x Table Saw TKS 2500 SC
3 x Lathe System PD 400
3 x Tool holder type D for SWH 1-A
3 x Cutting tools of high quality cobalt HSS steel, ground
4 x 4-jaw chuck individually clamping 125mm
3 x Precision quick-action drill chuck 0-10mm B16
3 x Three piece thread cutting set
3 x MICROMOT Mains Adapter NG 5/E
1 x Slot cutter 6.5mm
3 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
3 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x Half round cutter 13mm
2 x Wood Lathe DB450
3 x Precision quick-action drill chuck 0-13mm B16
3 x MICROMOT Mains Adapter NG 2/E
1 x TU 2404
3 x Blade holders for DS 460
1 x Rebating cutter 6.4mm
2 x Steady rest for D250X550
1 x Face clamping disc for D250X550
1 x Grinding mop cylinder grit 240
2 x Corundum bound cutting disc for LWS
2 x Corundum fan sander for LWS
3 x Replacement cutting disc for MICRO cutter MIC
1 x sclcr2525M12
1 x Parting tool 10mm
2 x Saw blade made of high-alloy special steel
1 x SCLCR1010E06
1 x Boring Bar for DCMT 10mm
1 x Lathe tools 10mm pastilhados
2 x Cutting tool 8 mm
2 x Precision lathe PD 250/E
2 x Corundum sanding discs for LWS
2 x Cutting tool 16 mm
2 x Backing disc for LWS
2 x Corundum grinding disc for LWS
1 x lathe tools 8mm
1 x Lathe tools 8mm pastilhados
2 x Cutting tool HM 20 mm
1 x Boring Bar for CCMT 8mm
1 x lathe tools 12mm
1 x Boring Bar for CCMT 16mm
2 x Corundum fan sander for LWS
2 x Sanding fleece for LWS
2 x Sanding fleece for LWS
1 x Boring Bar for CCMT
2 x Diamond-coated cutting and roughing disc
2 x HSS boring tool set, 6 pieces
1 x Super-Cut
1 x Tungsten Carbide Tipped (TCT)
1 x surface planing and thicknessing ADH 200
1 x Diamond Coated
1 x Table Sawr TKS 315 E
2 x Diamond-coated cutting disc for MIC
1 x Corundum grinding disc for LWS
1 x Wood Lathe DB900
1 x surface planing and thicknessing ADH 250
1 x Dial gauge
1 x Spiral blade. 125mm long with plain ends (without pins).
3 x Hot wire cutter THERMOCUT 230/E
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x MICROMOT Mains Adapter NG 2/S
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
2 x Hot wire cutter THERMOCUT 650
1 x 4-jaw chuck individually clamping 100mm
2 x Hot wire cutter THERMOCUT 12/E
1 x Cutting tool 10 mm
1 x 3-jaw chuck centrically clamping 100mm
1 x centrically clamping 125mm
1 x DCMT070204
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x Coarse-toothed (18 TPI per 25mm)
1 x CM2 - B16 - M10
1 x 4-jaw chuck individually clamping 80mm
1 x Cutter head for copy and surface milling MT2
1 x 3-jaw chuck centrically clamping 160mm
1 x centrically clamping 100mm
1 x Coarse-toothed (25 TPI per 25mm)
1 x End milling cutter kit HSS 12 pcs
1 x 3-jaw chuck centrically clamping 80mm
1 x Coarse-toothed (10 TPI per 25mm)
1 x Cutter head for copy and surface milling MT3
1 x Broca de alta duração de 0.8mm
1 x Inspector mirror
1 x Broca de alta duração de 2.1mm
1 x Broca de alta duração de 1.5mm
1 x Broca de alta duração de 0.7mm
1 x broca de alta duração de 0,6mm
1 x Inpection mirror 1-978
1 x Broca de alta duração de 2.4mm
3 x BIT-SET
1 x Broca de alta duração de 2.2mm
1 x Broca de alta duração de 2.5mm
1 x Grinding mop cylinder grit 80
1 x Broca de alta duração de 1.1mm
1 x broca de alta duração de 0,2mm
3 x Insulation Resistance Tester MG500
1 x 6-piece screwdriver set ESD
3 x Insulation Resistance Tester MG125
1 x 6-piece socket wrenches ESD
1 x 6-piece screwdriver and cross-recess set ESD
1 x 6-piece set of ESD/EGB tweezers
1 x Brass contact cleaner brush
1 x 6-piece wrench key set ESD
1 x ACCENT SERVICE TOOLS SET
1 x 6-piece TORX-screwdriver-set ESD
€25,046.66
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
SANWA-METER
SANWA-METER Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook