€4.75 + VAT

FREEZER-BR 200ml
[1461412]

FREEZER-BR 200ml

Quickly Tracks Thermal Intermittents, Cools Down to -50° C.

  • FREEZER-BR is CFC-free.
  • It ensures reliable cooling down to -50°C.
  • It quickly locates thermal intermittent components due to heat induces failure.
  • The product is chemically pure, flammable and evaporates immediately without leaving residue.

Application:

  • Low temperature testing of electronic systems and heat-sensitive components such as ICs, transistors, diodes, resistors, capacitors and other defective components.
  • Also suitable for heat sink protection of electronic components during soldering or desoldering.
  • Low temperature testing of electromechanical systems and electronic circuits.
  • Location of hairline cracks in printed circuit boards.

Technical Data:

 

Density: 0.54 g / cm³
Evaporation: complete
Temperature obtained:  -50° C
Flash point: flammable
ODP: 0.00

Reviews

Customers who bought this product also purchased
Glass fibre contact cleaner brush
Glass fibre contact cleaner brush
DUSTER-BR 200ml
DUSTER-BR 200ml
DEGRESER 200ml
DEGRESER 200ml
Manufacturers
1 x Five piece HSS chisel set
1 x Coarse-toothed (18 TPI per 25mm)
2 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x Treated muslin polishing wheel, stiff (100 x 15mm)
1 x Coarse-toothed (10 TPI per 25mm)
1 x Felt cloth polishing disc (100 x 15mm)
1 x Microfibre polishing wheel, 15-ply (100mm)
2 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x Blade holders for DS 460
2 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x Coarse-toothed (25 TPI per 25mm)
1 x Three jaw chuck for the lathe DB 250
2 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x TIP SPT-3
1 x Universal polishing paste
1 x Spiral blade. 125mm long with plain ends (without pins).
2 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x Independent four jaw chuck for the DB 250
2 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x Drill chuck with sliding sleeve for the tailstock
1 x Ball-shaped diamond coated 2.2mm
1 x Ball-shaped diamond coated 1.2mm
1 x Belt sander BBS/S
2 x 10-piece wood router cutter set
2 x MICROMOT Mains Adapter NG 2/S
2 x Aluminium Die-Cast
2 x MICROMOT Mains Adapter NG 5/E
1 x Table Saw TKS 2500 SC
1 x Fluted filter for CW-matic
1 x Vacum SAA 901
1 x Band knife of hardened spring band steel (without teeth)
3 x surface planing and thicknessing ADH 200
1 x Bench drill machine TBM 220
2 x 14-piece parallel supports set
1 x Special Fused Alumina (Hardness N).
1 x Silicon-Carbide.
1 x 2-speed scroll saw DSH
2 x Backing disc for LWS
1 x Wood Lathe DB900
1 x MICROMOT Mains Adapter NG 2/E
1 x Bench Circular Saw KS 230
1 x Table Sawr TKS 315 E
2 x Angle cutter 45 °
1 x Polishing Set
1 x Bandsaw blade of bimetal for MBS 240/E
2 x Belt sander BS/E
1 x Sanding pads for OZI 220/E grit 240
1 x Protective device for hand-operated MICROMOT
2 x Micro Compound Table KT 70
1 x Flexishaft MICROMOT 110/P
1 x sandpaper for PS 13 Grot 180
2 x Footswitch FS
1 x Dividing attachment TA 230 for PF 250
1 x MICROMOT tool holder
1 x MICROMOT extension cord. 300cm.
1 x Multiform grindstone
1 x MICROMOT drill stand MB 200
1 x Replacement glue sticks for HKP 220
1 x Replacement carving blades for MSG
1 x Sanding pads for OZI 220/E grit 150
1 x HSS cutting blade for OZI
1 x Tungsten carbide cutters set
1 x Flexishaft MICROMOT 110/BF
1 x Precision steel vice PM 40
1 x Step clamps made of steel
1 x Mill/Drill Unit BFB 2000.
1 x HSS immersion saw blades for OZI
1 x Sanding pads for OZI 220/E grit 80
1 x Machine Vice MS 4
1 x Replacement cutting wire for the THERMOCUT 12/E
1 x sandpaper for PS 13 Grit 400
1 x Three-jaw steel drill chuck
1 x MICROMOT steel collet set
1 x HSS immersion saw blades for OZI
1 x Replacement cutting disc for MICRO cutter MIC
1 x Diamond-coated cutting disc for MIC
1 x Sanding fleece for LWS
1 x Edge cutter with pin 6.4mm
1 x Half round cutter 13mm
1 x V-slot cutter 6.5mm
1 x Slot cutter 6.5mm
1 x Corundum sanding discs for LWS
1 x Rasp plate with metal burrs made from wolfram carbide for LWS
1 x Corundum sanding discs for LWS
1 x Tungstein carbide rasp - and cutting disc
1 x Corundum fan sander for LWS
1 x Chuck for TBM 220
1 x Combi cutter 6.5/2.5mm
1 x Cutting disc, with reinforcement
1 x Spare cutting wire
1 x Corundum grinding disc for LWS
1 x Tungsten Carbide Tipped (TCT)
1 x Rounding over cutter 6.4mm
1 x Rebating cutter 6.4mm
1 x Sanding fleece for LWS
1 x Slot cutter 3.2mm
1 x Diamond-coated cutting and roughing disc
1 x Slot cutter 5.0mm
1 x Corundum fan sander for LWS
1 x Core box bit 3.2mm
1 x Disc Sander TG 250/E
1 x Pensander PS 13
1 x Long neck angle grinder LHW
1 x Cylinder sander WAS/E
1 x Polishing machine PM 100
1 x Delta sander OZI/E
1 x Angle polisher WP/E
1 x SPRAYOIL 200ml
1 x FREEZER-TOP 200ml
1 x Lever Dial Indicator
1 x Round nose pliers 185mm
1 x Side cutters 170mm
1 x MULTI 200ml
2 x surface planing and thicknessing ADH 250
1 x Telephone pliers stright 165mm
1 x FREEZER-BR 200ml
1 x Wire strippers 165mm
1 x Combination pliers 185mm
1 x CD-CLEANER 200ml
1 x Grinding mop cylinder grit 240
1 x Wire strippers 160mm
1 x SPRAYFLON 200ml
1 x Flat nose pliers 185mm
1 x TUNER 200ml
€10,188.29
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
CRAMOLIN
CRAMOLIN Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook