€3.27 + VAT

ANTISTATIC 200ml
[1331612]

ANTISTATIC 200ml

Neutralizes and Eliminates Static Electricity.

  • ANTISTATIC is a clear and safe agent that instantly eliminates static build-up caused by friction and low humidity conditions.
  • It prevents static electricity that can damage microelectronic components, semi-conductors and other high sensitive devices.
  • ANTISTATIC considerably and durably reduces the attraction of dust and dirt.
  • It eliminates electrostatic discharges that can lead to equipment failure and loss of stored data.
  • Its thin, invisible film is harmless to people and materials.
  • A test acc. DIN IEC 93 showed a reduction of surface resistance down to values below 109 ohm.

Application:

  • Data processing, electronic equipment, photographic processing equipment, computer housing and offices equipment.
  • Eliminates the attraction of dust and dirt on:
    • plastic parts
    • records
    • cabinets
    • floors
    • walls
    • ceilings
    • carpets
    • work surfaces
    • seat covers, etc.

Technical Data:

 

Colour: colourless
Density: 0.79 g / cm³
Drying: quick
Surface
resistance:(Polyethylene treated with Antistatik)
Reviews

Manufacturers
1 x TORX-screwdrivers T9
1 x TORX-screwdrivers T10
2 x Precision caliper 500mm
1 x Precision quick-action drill chuck 0-10mm B16
1 x Morse taper MT3 - B16
1 x 4-jaw chuck individually clamping 125mm
1 x 3-jaw chuck centrically clamping 160mm
1 x centrically clamping 125mm
1 x Precision quick-action drill chuck 0-16mm B16
1 x Precision quick-action drill chuck 0-10mm B16
1 x Polishing felt, medium hard
1 x TORX-screwdrivers T7
1 x 3-jaw chuck centrically clamping 125mm
2 x Steel tape measure
1 x 4-jaw chuck individually clamping 80mm
1 x 4-jaw chuck individually clamping 100mm
2 x 6pcs Double Open End wrench set
1 x Precision quick-action drill chuck 0-8mm B16
1 x 3-jaw chuck centrically clamping 100mm
1 x centrically clamping 100mm
1 x Morse taper MT2 - B16
3 x Dial gauge
1 x Precision quick-action drill chuck 0-13mm B16
2 x magnetic base 80kg
1 x TORX-screwdrivers T5
1 x TORX-screwdrivers T4
2 x EUROline-Conductive set of pliers
1 x CM2 - B16 - M10
1 x PLCC Puller
1 x TORX-screwdrivers T6
2 x Precision magnetic gauge stand
1 x Cross-recess Screwdrivers 1
1 x Contact bracelet with spiral cord
1 x Digital caliper gauge 300 mm
1 x Cross-recess Screwdrivers 00
1 x ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x Cross-recess Screwdrivers 000
1 x Precision caliper square
3 x 6-piece screwdriver and cross-recess set
1 x Super-fine sanding discs grain 000
1 x Cross-recess Screwdrivers 0
1 x Earthing module
1 x Earth wire
1 x Crocodile clip
1 x Cross-recess Screwdrivers 1
2 x Earth wire with dummy Schunko-plug
2 x replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x 6-piece screwdriver and cross-recess set
1 x Professional set for finish grinding and polishing
2 x Glass fibre contact cleaner brush
1 x ESD Brushe
1 x PRECISION WIRE STRIPPER ESD-PLUS
1 x Broca de alta duração de 2.7mm
1 x Broca de alta duração de 3.0mm
1 x ESD-handling ser 9-361
1 x Broca de alta duração de 2.8mm
1 x Broca de alta duração de 2.6mm
1 x Broca de alta duração de 2.3mm
1 x Broca de alta duração de 2.4mm
1 x Broca de alta duração de 2.9mm
1 x Broca de alta duração de 2.1mm
1 x Broca de alta duração de 2.2mm
1 x Fixed Steady
1 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x sclcr2525M12
1 x Self-adhesive silicone film for easy sanding disc replacement
1 x Insert CCGT060202-AK
1 x Collet Set for accurate use on round components
1 x Insert CCGT120404-AK
1 x Slot cutter 6.5mm
1 x broca de alta duração de 0,2mm
1 x BIT-SET
1 x Coarse-toothed (18 TPI per 25mm)
1 x Rebating cutter 6.4mm
1 x Slot cutter 3.2mm
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x Hot wire cutter THERMOCUT 650
1 x Blade holders for DS 460
1 x Combi cutter 6.5/2.5mm
1 x Four Jaw Chuck
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x Rounding over cutter 6.4mm
1 x Edge cutter with pin 6.4mm
1 x Centre Turning Attachment
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x Gear Chuck
1 x Coarse-toothed (10 TPI per 25mm)
1 x Tool holder for rotary tools
1 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x sanding belts for BBS/s Grit 240
1 x V-slot cutter 6.5mm
1 x Core box bit 3.2mm
1 x Slot cutter 5.0mm
1 x 10-piece wood router cutter set
2 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x Floor cover ESD
1 x Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x Spiral blade. 125mm long with plain ends (without pins).
1 x Broca de ponto 3.15 x 1.25
1 x sanding belts for BBS/s Grit 80
1 x HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x Coarse-toothed (25 TPI per 25mm)
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x Half round cutter 13mm
1 x EUROline side cutter pointed head
1 x DEGRESER 200ml
1 x DUSTER-BR 200ml
1 x Tungsten carbide drills Ø1mm
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x Fluted filter for CW-matic
1 x Stainless steel brushes
1 x HSS twist drill set to DIN 338
1 x Diamond cutting blade for OZI
1 x Sanding pads for OZI 220/E grit 240
1 x HSS immersion saw blades for OZI
€4,674.92
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
CRAMOLIN
CRAMOLIN Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook