€12.67 + VAT

TOP-PIN 200ml
[1101412]

TOP-PIN 200ml

Long Term Protection of Precious Metal Contacts and Connectors.

  • TOP-PIN has been specially developed for preserving precious metal contacts.
  • It gently cleans lubricates and protects these micro-thin surfaces of contacts and connectors.
  • The high-quality synthetic active agents and inhibitors show remarkable lubricating and anti-corrosion properties, thus preventing abrasion and damaging of delicate precious metal layers and ruling out any corrosion of supporting base metals.
  • The protective film of TOP-PIN is stable, very thin, highly lubricating, and resistant to high heat

Application:

  • TOP-PIN is recommended for PCB gold fingers, computer interface connectors and guarantees a long-lasting preservation of operational reliability for contacts and connectors of all types.
  • The use of TOP-PIN is particularly recommended in high-quality electronic appliances and in the case of aggresive environments in workshops, industry, electronic motorcar equipment, EDP, telecommunications, aerospace and in the military sector.

Technical Data:

 

Colour: yellowish
Odour: that of solvents
Density: 0.67 g / cm³
Heat resistance (film): up to +300° C
Anit-corrosion protection:  4 cycles (DIN IEC 68)
Lubricating properties under pressure: excellent
Reviews
Manufacturers
2 x Spiral blade. 125mm long with plain ends (without pins).
1 x Diamond Grinding Bits 1,8mm
1 x Delta sander OZI/E
1 x Disc Sander TG 125/E
1 x Diamond-coated cutting and roughing disc
2 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x Diamond Grinding Bits 1,8mm
3 x Diamond cutting blade for OZI
2 x Sanding pads for OZI 220/E grit 240
2 x Coarse-toothed (25 TPI per 25mm)
2 x HSS immersion saw blades for OZI
2 x Sanding pads for OZI 220/E grit 150
2 x Diamond Cutting Discs
1 x Disc Sander TG 250/E
1 x Diamond Grinding Bits 1mm
2 x Blade holders for DS 460
1 x Cylindrical cutters
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
2 x Fibre-Cut Discs
1 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x Flexible silicon discs
1 x Microfibre polishing wheel, 15-ply (100mm)
1 x High quality corundum grinding bits
1 x Coarse-toothed (10 TPI per 25mm)
1 x Flexible silicon discs
1 x High quality corundum grinding bits
2 x OPTI BF16 Vario
2 x Diamond Cutting Discs
1 x High quality corundum grinding bits
1 x HSS twist drill set with centring pin
1 x Sanding fleece for LWS
2 x Drill chuck with sliding sleeve for the tailstock
1 x Sanding pads for OZI 220/E grit 80
2 x Compact workshop vacuum cleaner CW-matic
1 x 
2 x Hot wire cutter THERMOCUT 650
1 x Felt polishers
1 x High quality corundum grinding bits
1 x Conjunto de três brocas de ponto
3 x Self-adhesive white corundum sanding discs for TG 250/E
1 x Rasp plate with metal burrs made from wolfram carbide for LWS
1 x Fine dust paper filter for CW-matic
2 x Engraving tool GG
3 x Dividing attachment TA 230 for PF 250
1 x Felt polishers
1 x Super-fine sanding discs grain 400
2 x Felt cloth polishing disc (100 x 15mm)
3 x Fixed Steady
2 x Fibre-Cut Discs
2 x Fibre-Cut Discs
1 x HSS drill bits 1.2mm
2 x Router base OFV
1 x Coarse-toothed (18 TPI per 25mm)
2 x Hot wire cutter THERMOCUT 230/E
1 x Sanding fleece for LWS
2 x Super-fine sanding discs grain 000
2 x Lambswool polishing disc
1 x Cutting disc, with reinforcement
2 x Fibre-Cut Discs
1 x Tungsten carbide drills Ø1mm
1 x HSS immersion saw blades for OZI
1 x HSS drill bits 1.0mm
1 x Multipurpose Vices Primus 75
1 x Machine Vice MS 4
2 x Fibre-Cut Discs
1 x High quality corundum grinding bits
2 x Universal and oil siphoning pump AP 12
3 x Self-adhesive silicone carbide sanding discs for TSG 250/E
2 x Independent four jaw chuck for the DB 250
1 x Flame shaped milling cutters
1 x Tungsten carbide drills Ø2mm
1 x Pensander PS 13
1 x Metal Cutting Blades
1 x Super-fine sanding discs grain 2000
1 x HSS drill bits 1.6mm
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
2 x Super-Cut
1 x Diamond blade
1 x Felt polishers
1 x Replacement belts for BSL 220/E
2 x Precision steel vice PM 40
1 x Tungsten tipped saw blade
2 x Fibre-Cut Discs
1 x Three jaw chuck for the lathe DB 250
1 x Tungsten carbide drills Ø1,5mm
1 x Precision Vice FMZ
1 x MICRO Miller FF 500
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x HSS drill bits 0.8mm
1 x Flexible silicon discs
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x HSS drill bits 0.5mm
2 x Centre Turning Attachment
1 x Diamond Cutting Discs
2 x Chuck for TBM 220
3 x Self-adhesive silicone film for easy sanding disc replacement
1 x Saw blade made of high-alloy special steel
1 x Flap Wheels
1 x V-slot cutter 6.5mm
1 x quantum revolving center CM2
1 x Slot cutter 5.0mm
1 x Cutting tool 16 mm
1 x HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x Band knife of hardened spring band steel (without teeth)
1 x Morse taper MT2 - B16
1 x MICROMOT Mains Adapter NG 5/E
1 x MICROMOT Mains Adapter NG 2/S
1 x Cylinder sander WAS/E
2 x Self-adhesive white corundum sanding discs for TG 250/E
1 x Rebating cutter 6.4mm
1 x Diamond blade for MBS 240/E
1 x Super safety and specialty bit set, 75-piece
1 x Insert CCGT060202-AK
1 x Replacement cutting disc for MICRO cutter MIC
1 x MICRO-screwdrivers
1 x Quick-action tool holder kit SWH AA
1 x Wood Lathe DB450
1 x Collet chuck ER25 for D250X550
1 x lathe tools 10mm
1 x Insert CCGT120404-AK
1 x Precision quick-action drill chuck 0-13mm B16
1 x Collet chuck ER32 for D250X550
1 x MICROMOT glue gun HKP 220
1 x Angle cutter 45 °
1 x Extra narrow bandsaw blade (3.5mm) for tight radii
1 x Four Jaw Chuck
1 x MICROFLAME burner MFB/E
1 x Follow rest for D250X550
1 x DCGT 070202F-AL
1 x Collet Set for accurate use on round components
1 x 10-piece wood router cutter set
1 x Face clamping disc for D250X550
1 x 4-jaw chuck individually clamping 125mm
1 x Core box bit 3.2mm
1 x Complete Engraving Kit with trial glass
2 x Spare cutting wire
1 x Diamond-coated cutting disc for MIC
1 x Micro Compound Table KT 70
1 x Tool holder type H for SWH 1-A
1 x Cutting tool 10 mm
1 x Slot cutter 6.5mm
2 x Footswitch FS
1 x MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x Rounding over cutter 6.4mm
1 x Combi cutter 6.5/2.5mm
1 x Screwdriver bit set. 49-piece.
1 x Lathe tools 10mm pastilhados
1 x Tool holder type D for SWH 1-A
1 x Blade for Wood and Plastics
1 x machine base with shelves for D250X550
1 x Tool holder for rotary tools
2 x Slot cutter 3.2mm
1 x MICRO Heat gun MH 550
1 x Lathe chuck flange for D250X550
1 x VIDEOCLEAN 200ml
1 x DIL40/TSOP40 ZIF 18.4mm Flash-1
1 x Special Fused Alumina (Hardness N).
1 x DIL40/TSOP40 ZIF 18.4mm
1 x DIL48/TSOP56 ZIF 18.4mm Flash-2
3 x MICROMOT tool holder
1 x TOP-PIN 200ml
1 x MICROMOT steel collet set
1 x Polishing Set
1 x Polishing felt, medium hard
1 x DIL48/TSOP56 ZIF 18.4mm Flash-3
2 x 14-piece parallel supports set
1 x DIL48/TSOP48 ZIF 15.4mm
1 x DIL48/TSOP56 ZIF 18.4mm Flash-6
1 x Multiform grindstone
1 x PROTECTION 200ml
1 x Corundum bound cutting disc for LWS
€13,000.75
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
CRAMOLIN
CRAMOLIN Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook