€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Lever Dial Indicator
1 x	Precision magnetic gauge stand
1 x	Brass brushes
1 x	Felt polishers
2 x	FREEZER-BR 200ml
1 x	Stainless steel wheels
1 x	Professional set for finish grinding and polishing
1 x	Cotton polishers
1 x	Wheels brushes
1 x	Cups brushes
1 x	Cotton polishers
1 x	EUROline snipe nose pliers
2 x	MICRO Miller MF 70
1 x	Flexible silicon discs
1 x	Felt polishers
1 x	Flexible polishing pad set
1 x	Stainless steel cups
1 x	Flexible silicon discs
1 x	Flexible silicon discs
1 x	SmartProg2
3 x	Pinça SOIC de 8 pinos
1 x	Flat nose pliers 165mm
1 x	MICRO Miller FF 500
1 x	Core box bit 3.2mm
1 x	ANTISTATIC 200ml
1 x	V-slot cutter 6.5mm
1 x	Slot cutter 6.5mm
1 x	Wood Lathe DB900
1 x	Telephone pliers bent 205mm
1 x	POLISHER 200ml
1 x	Side cutters 160mm
1 x	Warding files set, 6pcs
2 x	IC Test clip 20 pins
1 x	PRINTER 200ml
1 x	SCREEN 200ml
1 x	High quality corundum grinding bits
1 x	Slot cutter 3.2mm
1 x	MULTI 200ml
1 x	Wire strippers 165mm
1 x	Round nose pliers 165mm
1 x	MICROFLAM gas soldering set MGS
1 x	Safety Insulated Phillips Screwdriver 14-632VDE
1 x	Edge cutter with pin 6.4mm
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	Rebating cutter 6.4mm
1 x	EUROline round nose pliers
1 x	Compact workshop vacuum cleaner CW-matic
1 x	FREEZER-TOP 200ml
1 x	Vacum SAA 901
1 x	High quality corundum grinding bits
1 x	MICROFLAME burner MFB/E
1 x	Angle cutter 45 °
1 x	surface planing and thicknessing ADH 200
1 x	Glass fibre contact cleaner brush
1 x	Brass contact cleaner brush
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
2 x	VASELINE 200ml
1 x	Glass fibre contact cleaner brush
1 x	SPRAYFLON 200ml
1 x	Cylinder sander WAS/E
1 x	PROTECTION 200ml
1 x	BGA-0245/0243
1 x	BGA-0245/0242
1 x	BGA-0246/0244
1 x	SILICONE 200ml
1 x	BGA-Bottom-115
1 x	BGA-0245/0241
1 x	6-piece TORX-screwdriver-set
1 x	surface planing and thicknessing ADH 250
1 x	HSS boring tool set, 6 pieces

€7,522.79