€395.00 + IVA

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Comentários

Carrinho de Compras

2 x	Disco de polir em lã
1 x	Serra circular de bancada KS 230
4 x	Messa de cordenadas KT 150
3 x	Laminas sem pinos 50TPI
1 x	Fresa diamante esférica 1.2mm
1 x	Lixadeira de disco TG 250/E
1 x	Fresa diamante 5mm
1 x	Lixadeira delta OZI/E
1 x	Lâmina diamantada para MBS 240/E
4 x	Lâmina diamantada
1 x	Conjunto de 2 brocas diamantadas 0.8 e 1.2mm
1 x	Disco de corte diamantado Ø38mm
1 x	Fresa cilíndrica
1 x	Lixadeira de disco TG 125/E
2 x	Laminas sem pinos 41TPI
1 x	Disco de corte diamantado com ventilação Ø38mm
4 x	Disco de corte diamantado
1 x	Disco de corte diamantado para OZI
1 x	Disco de corte diamantado Ø20mm
4 x	Broca de alta duração de 1.1mm
2 x	Diamond-coated cutting and roughing disc
1 x	Disco de corte diamamtado para MIC
1 x	Fresa de corte
3 x	Lâmina de Tungsténio
1 x	Fresa diamante esférica 1mm
1 x	Disco de corte diamantado com ventilação Ø20mm
1 x	Fresa diamante esférica 1,8mm
5 x	broca de alta duração de 0,2mm
1 x	Fresa diamante 1,8mm
4 x	Broca de alta duração de 1.0mm
4 x	Broca de alta duração de 0.9mm
3 x	Broca de alta duração de 1.3mm
2 x	Centre Turning Attachment
3 x	Boina de Polir em Musselina branqueada
2 x	Bucha de coroa dentada para TBM 220
1 x	0, Ø3Disco de lixa em lamelas fléxiveis, grão 120mm
1 x	Base tupia OFV
3 x	Bucha de aperto rápido em aço
1 x	Blocos escadeados em aço
4 x	Broca de alta duração de 2.5mm
2 x	Lâmina com pastilhas em Tungsténio
1 x	Disco de corte em corindo para LWS
4 x	Broca de alta duração de 2.3mm
2 x	Lixas auto aderentes grão 150 para TG250/E
4 x	Broca de alta duração de 0.5mm
1 x	Caneta gravadora GG 12
1 x	Cintas de lixa grão 120 para BSL220/E
2 x	Bastões de cola para HKP 220
3 x	Broca de alta duração de 1.4mm
3 x	Broca de alta duração de 2.0mm
1 x	Bucha de 4 garras independentes para DB 250
3 x	Broca de alta duração de 0.8mm
1 x	Lixas auto aderentes grão 80 para TG250/E
3 x	Broca de alta duração de 1.2mm
2 x	Aspirador compacto CW Matic
1 x	Bucha de 3 garras autocentrantes para DB 250
4 x	Broca de alta duração de 2.1mm
3 x	Broca de ponto 6.30 x 2.50
1 x	Caneta Lixadeira PS 13
1 x	Bomba para mudar óleo AP 12 de 12V
1 x	Aparafusadora MIS 1 com 16 bits
4 x	Broca de alta duração de 1.5mm
3 x	Broca de alta duração de 0.4mm
3 x	Broca de alta duração de 2.2mm
2 x	Broca de ponto 5.00 x 2.00
1 x	Discos de lixa super fina grão 000
1 x	Discos de lixa super fina grão 2000
1 x	Lâmina em HSS
2 x	Fio de corte de reposição para Thermocut 230/E
1 x	Sacos filtro em papel para CW-Matic
3 x	Broca de ponto 8.00 x 3.15
1 x	Pano de Microfibra
1 x	Filtro plissado de reposição
1 x	Disco auto aderente para LWS
1 x	Lamina super-cut
1 x	Disco de polir em feltro, medio
3 x	Broca de ponto 3.15 x 1.00
1 x	Conjunto profissional de polimento e acabamento.
2 x	Broca de ponto 3.15 x 1.25
2 x	BGA-Bottom-111
1 x	Mini rebarbadora LHW
1 x	Programador Universal Beeprog2C
1 x	BGA-Bottom-102
1 x	Lâminas com pinos 18 TPI
1 x	Laminas sem pinos 34TPI
2 x	BGA-Bottom-106
1 x	BGA-Bottom-115
1 x	DIL8/QFN8-1 ZIF-CS
2 x	Broca de alta duração de 2.4mm
1 x	Escovas em latão tipo pincel
1 x	DIL48/MQFP80 ZIF C164
1 x	Guia para Lâminas de reposição
1 x	DIL48/MQFP80 ZIF C500
1 x	Laminas sem pinos 14TPI
1 x	BGA-Bottom-101
1 x	BGA-Bottom-108
2 x	BGA-0246/0243
1 x	Collet Set for accurate use on round components
1 x	DIL44/QFN44-2 ZIF-CS
2 x	BGA-Bottom-125
3 x	Broca de alta duração de 0.3mm
2 x	BGA-0245/0241
1 x	DIL28/QFN28-2 ZIF-CS
1 x	Programador universal BeeProg2
1 x	Lâminas com pinos 10 TPI
2 x	BGA-Bottom-10
1 x	DIL40/MQFP52 ZIF ADuC812
2 x	BGA-Bottom-11
1 x	Suporte para lâminas para DS 460
1 x	Broca de alta duração de 0.7mm
1 x	BGA-Bottom-118
1 x	BGA-Bottom-105
1 x	Lamina para madeira e plásticos
1 x	BGA-Bottom-126
2 x	Broca de alta duração de 2.6mm
2 x	BGA-0246/0244
1 x	Fresas conicas
2 x	BGA-Bottom-103
1 x	Lâminas com pinos 25 TPI
1 x	Laminas sem pinos 36TPI
2 x	BGA-0245/0243
1 x	BGA-Bottom-127
1 x	Laminas sem pinos 17TPI
2 x	BGA-Bottom-1
1 x	Kit de gravação em Vidro
1 x	BGA-0245/0242
1 x	DIL48/QFN48 ZIF-CS
1 x	DIL32/PLCC32 ZIF-CS NOR-1
1 x	DIL42/SDIP42 ZIF 600mil
1 x	DIL48/QFP100 ZIF PLD-2
1 x	DIL20W/SOIC20 ZIF 300mil
2 x	Interreptor de pé FS
1 x	Extractor de ICs
1 x	DIL28W/SOIC28 ZIF 300mil
1 x	DIL40/QFP64-3 ZIF NEC-1
1 x	DIL40/QFP64-1 ZIF-CS NEC-1
1 x	DIL40/QFP80 ZIF M37702
1 x	DIL20W/PLCC20 ZIF
1 x	DIL32/QFP64 ZIF H8-1
1 x	DIL40/PLCC52 ZIF AWM-1
1 x	DIL40/QFP64 ZIF LPC-1
1 x	DIL48/SSOP56 ZIF Flash-1
1 x	DIL28/SOIC28 ZIF 330 mil
1 x	DIL40/QFP64-2 ZIF-CS NEC-1
1 x	DIL48/QFP100 ZIF NEC-2
1 x	DIL40/PLCC28 ZIF AWM-1
1 x	DIL40/SOIC20 ZIF AWM-1
1 x	DIL40/PLCC52 ZIF AWM-2
1 x	DIL48/SDIP56 ZIF 68HC05Bx
1 x	DIL8/SOT23-6 ZIF-CS PIC
1 x	DIL28/PLCC28 ZIF
1 x	DIL48/SSOP56 ZIF Flash-3
1 x	DIL48/SSOP90 ZIF Flash-1
1 x	DIL32/SDIP64-1 ZIF Toshiba-BM1136
1 x	DIL40/PLCC68 ZIF AWM-1
1 x	DIL16W/SOIC16 ZIF 300mil
1 x	DIL32/SOIC32 ZIF 445mil
1 x	DIL14W/SOIC14 ZIF 150mil
1 x	DIL28/QFP64 ZIF H8/3644
1 x	DIL48/QFP100 ZIF PLD-4
3 x	Veio Flexível 110/P
2 x	Suporte para ferramentas MICROMOT
1 x	DIL40/SDIP52 ZIF 55x
2 x	Fresa de ensamblar 6.4mm
2 x	Extensão com fichas MICROMOT 300cm
1 x	DIL40/PLCC44 ZIF W-EPROM / MCS51
1 x	DIL32/PLCC84 ZIF HS3334ESCF1H
1 x	Broca de alta duração de 3.0mm
3 x	Coluna Micromot MB 200
1 x	DIL16W/SOIC16 ZIF 150mil
1 x	DIL48/QFP100 ZIF NEC-1
1 x	DIL48/SSOP70 ZIF OKI-1
3 x	Conjunto de pinças MICROMOT em aço
3 x	Micro mesa de cordenadas KT 70
1 x	DIL48/QFP100 ZIF MB90F-1
3 x	Disco de corte Super-Cut
3 x	Conjunto de 10 fresas para tupia
1 x	DIL48/SSOP56 ZIF Flash-2
1 x	DIL34/SSOP34 ZIF 200 mil
1 x	DIL3/SOT23-3 ZIF-CS
1 x	DIL18W/SOIC18 ZIF 300mil
1 x	DIL20/SOIC20 ZIF 300 mil
1 x	DIL48/QFP100 ZIF PLD-3
1 x	DIL32/PLCC32 ZIF-CS
1 x	DIL28/PLCC84 ZIF HS538ESC01H
3 x	Fresa de chanfrar 45º
1 x	DIL40/QFP100 ZIF AVR-1
1 x	DIL28/PLCC32 ZIF EPROM
1 x	DIL40/QFP144 ZIF LPC-1
2 x	Fresa de arredondar raio 3.2mm
3 x	Disco de corte pastilhado 36 dentes
2 x	Conjunto de 14 blocos paralelos
1 x	DIL32/SDIP64 ZIF H8-1
1 x	DIL40/QFP64-4 ZIF NEC-1
2 x	Fresa de Ranhurar 3.2mm
2 x	Tambor de lixa Grão 80
1 x	DIL40/QFP144 ZIF H8S-1
2 x	Mó de Corindo
1 x	DIL44/SSOP44 ZIF 240mil
1 x	DIL40/SOIC16 ZIF MB-1
1 x	DIL8/SSOP8 ZIF 120mil
1 x	Broca de alta duração de 2.9mm
1 x	DIL40/PLCC44 ZIF AWM-1
1 x	Pistola de cola termofusivel HKP 220
1 x	DIL16/SOIC16-1 ZIF 170mil
1 x	DIL20/PLCC20 ZIF-CS
1 x	DIL48/QFP100 ZIF PLD-1
1 x	DIL28/QFP52 ZIF-CS SX52
1 x	DIL40/PLCC44 ZIF PIC-1
3 x	Fresa de ranhurar em V 6.5mm
1 x	DIL32/SOIC32 ZIF 300 mil
1 x	DIL40/PLCC52 ZIF MCS51-2
1 x	DIL34/SSOP34-1 ZIF-CS
3 x	Pasta de Polir Universal
1 x	DIL48/QFP100 ZIF MSP430-1
2 x	Fresa de meia cana 6.4mm
1 x	DIL48/SSOP48 ZIF 300mil
1 x	DIL40/SOIC28 ZIF AWM-1
1 x	DIL20/SOIC20 ZIF 200mil
1 x	DIL32/PLCC32 ZIF
1 x	DIL40/PLCC68 ZIF DS87C550
1 x	DIL16/SOIC16 ZIF 200 mil
1 x	DIL48/PQFP144 ZIF ST10-1
1 x	DIL40/VQFP64 ZIF AWM-1
1 x	Conjunto de três brocas de ponto
1 x	Tambor de lixa Grão 240
2 x	Boina de Polir em Microfibra
1 x	DIL48/PQFP80 ZIF M58BW-1
1 x	DIL48/PQFP100 ZIF ST92Fxxx
1 x	DIL44/PSOP44 ZIF 600 mil
1 x	Bottom PSOP44 NOR-1
2 x	Fresa de barra combinada 6.5/2.5mm
1 x	DIL48/PQFP100 ZIF ST10-1
1 x	Fresa de Ranhurar 5.0mm
1 x	Bottom PSOP44 NOR-2
1 x	Top PSOP44 ZIF 600mil
1 x	DIL8/SOIC8 ZIF 150mil
2 x	Fresa de meia cana 13mm
1 x	DIL48/PQFP100 ZIF PLD-1
1 x	Bottom PSOP44 NOR-3
1 x	Pinça SOIC de 8 pinos
1 x	Tambor de lixa Grão 120
2 x	Fresa de perfilar 5.0mm
1 x	DIL40/TSOP40 ZIF 18.4mm Flash-1
1 x	Boina de Polir em Musselina Tratada
1 x	DIL40/TQFP64 ZIF CC-1
2 x	Mó de carboneto de silício
1 x	DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x	Veio Flexível 110/BF
1 x	DIL48/TQFP100 ZIF PLD-2
1 x	DIL44/TQFP44-1 Zif
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-6
1 x	DIL32/TSOP32 ZIF 11.8mm
1 x	Boina de Polir em Feltro
2 x	Conjunto de polimento
1 x	DIL40/TQFP80-1 ZIF AWM-1
1 x	DIL44/TSOP44-II ZIF 400mil
1 x	DIL40/TQFP64 ZIF AVRmega-2
1 x	Pincel ESD
1 x	DIL48/TSOP48 ZIF 18.4mm
1 x	DIL44/TQFP44-2 ZIF
1 x	DIL40/TQFP44 ZIF AWM-1
1 x	DIL32/TSOP32 ZIF 18.4mm Flash
1 x	BeeHive208S
1 x	DIL48/TQFP48-1 ZIF
1 x	BeeHive204
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-3
1 x	DIL40/TQFP44 ZIF PIC-1

€43,155.71