€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

3 x	surface planing and thicknessing ADH 200
2 x	3-jaw chuck centrically clamping 160mm
1 x	Nylon Fleece Brushes
1 x	Sanding Discs
1 x	WCMT050308
1 x	Milling cutter set (2 - 5mm)
2 x	Set of precision cutters
2 x	MICRO Miller FF 500
3 x	Cutter head for copy and surface milling MT2
2 x	centrically clamping 100mm
1 x	Cutter head for copy and surface milling MT3
1 x	4-jaw chuck individually clamping 80mm
1 x	Turning inserts WCMX050308F
2 x	Disc cutters
2 x	Solid carbide stylus for engraving
1 x	Lathe System PD 400
1 x	Cylinder shaped milling cutters
2 x	Dial gauge
1 x	Safety insulated screwdrivers 14-606 VDE
2 x	Tungsten carbide cutters set
1 x	Motor-driven carving device MSG
2 x	centrically clamping 125mm
2 x	4-jaw chuck individually clamping 100mm
1 x	Precision quick-action drill chuck 0-10mm B16
2 x	Ball shaped milling cutters
1 x	4-jaw chuck individually clamping 125mm
1 x	Precision caliper square
2 x	3-jaw chuck centrically clamping 125mm
2 x	Wolfram vanadium steel milling bits
2 x	Flame shaped milling cutters
1 x	Broca de ponto 5.00 x 2.00
1 x	Morse taper MT2 - B16
1 x	Set of special steel cutters
1 x	3-jaw chuck centrically clamping 80mm
2 x	Tungsten carbide cutter 2.0mm
2 x	Broca de alta duração de 2.9mm
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	Cutting tool HM 20 mm
1 x	Morse taper MT3 - B16
1 x	DCMT070204
1 x	MICRO Miller MF 70
1 x	3-jaw chuck centrically clamping 100mm
1 x	Scroll saw DS 230/E
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
2 x	Felt polishers
1 x	Felt polishers
1 x	Broca de ponto 3.15 x 1.25
1 x	Cylinder sander WAS/E
1 x	Flexible silicon discs
1 x	Conjunto de três brocas de ponto
1 x	Diamond-coated cutting and roughing disc
1 x	Broca de alta duração de 1.0mm
1 x	Insert LGTN-3
1 x	Cylindrical cutters
1 x	Parting tool 10mm
1 x	ESD Tweezers 5-192
1 x	Flexible silicon discs
1 x	Flexible silicon discs
1 x	Tungsten carbide cutter 3.0mm
1 x	Grinding mop cylinder grit 120
2 x	Flexible polishing pad set
1 x	Broca de alta duração de 0.9mm
1 x	6-piece set of ESD/EGB tweezers
1 x	Broca de alta duração de 2.8mm
1 x	Solid carbide stylus for engraving
1 x	ACCENT SERVICE TOOLS SET
2 x	Flexible polishing pad set
1 x	Polishing machine PM 100
1 x	Tungsten carbide cutter 1.0mm
1 x	Grinding mop cylinder grit 120
1 x	ESD Tweezers 5-193
1 x	Conj 5 pinças ESD
1 x	Super-fine sanding discs grain 000
1 x	Multipurpose Vices Primus100
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	EUROline-Conductive set of pliers
1 x	Grinding mop cylinder grit 240
1 x	Felt polishers
1 x	OPTI BF16 Vario
1 x	Wolfram vanadium steel milling bits
1 x	BGA-0245/0242
1 x	BGA-Bottom-108
1 x	Beeprog2C
1 x	Bottom PSOP44 NOR-3
1 x	DIL8/QFN8-1 ZIF-CS
1 x	PRECISION WIRE STRIPPER ESD-PLUS
1 x	ESD-handling set
1 x	BeeHive204
1 x	BGA-Bottom-10
1 x	DIL28/QFN28-2 ZIF-CS
1 x	DIL48/LQFP64 ZIF M38039/M39049
1 x	DIL48/QFN48 ZIF-CS
1 x	BGA-Bottom-115

€18,880.81