€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

1 x	Diamond Cutting Discs
1 x	Diamond blade for MBS 240/E
1 x	Diamond-coated cutting disc for MIC
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Diamond Grinding Bits 1,8mm
1 x	Chuck for TBM 220
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Diamond Twist Drills
1 x	Combi cutter 6.5/2.5mm
1 x	BeeProg2
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Disc cutters
1 x	Diamond Coated
1 x	Diamond Grinding Bits 1mm
1 x	Cone shaped milling cutter
1 x	Blade holders for DS 460
1 x	Blade guides separately
1 x	Centre Turning Attachment
1 x	Diamond-coated cutting and roughing disc
1 x	Blade for Wood and Plastics
1 x	Delta sander OZI/E
1 x	Diamond Grinding Bits 1,8mm
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Diamond Cutting Discs
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Disc Sander TG 125/E
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Beeprog2C
1 x	Brass brushes
1 x	Collet Set for accurate use on round components
1 x	Diamond Cutting Discs
2 x	Diamond cutting blade for OZI
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Multiform grindstone
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Diamond Grinding Bits 5mm
1 x	Diamond blade
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Replacement carving blades for MSG
1 x	Diamond Cutting Discs
1 x	Complete Engraving Kit with trial glass
1 x	Disc Sander TG 250/E
1 x	Polishing machine PM 100
1 x	Cylindrical cutters
1 x	Sanding pads for OZI 220/E grit 80
1 x	Felt polishers
1 x	Felt polishers
1 x	TORX-screwdrivers T10
1 x	HSS immersion saw blades for OZI
1 x	Engraving tool GG
1 x	Fibre-Cut Discs
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Fibre-Cut Discs
1 x	TORX-screwdrivers T9
1 x	Machine Vice MS 4
1 x	Corundum sanding discs for LWS
1 x	TORX-screwdrivers T15
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Fibre-Cut Discs
1 x	TORX-screwdrivers T20
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	HSS cutting blade for OZI
1 x	Felt polishers
1 x	Fixed Steady
1 x	Flexishaft MICROMOT 110/BF
1 x	Flame shaped milling cutters
1 x	Edge cutter with pin 6.4mm
1 x	Sanding pads for OZI 220/E grit 240
1 x	Super-Cut
1 x	MICROMOT glue gun HKP 220
1 x	HSS immersion saw blades for OZI
1 x	Fibre-Cut Discs
1 x	Fine dust paper filter for CW-matic
1 x	TORX-screwdrivers T10
1 x	Dividing attachment TA 230 for PF 250
1 x	TU 2004V
1 x	Five piece HSS chisel set
1 x	Fibre-Cut Discs
1 x	Felt polishers
1 x	Sanding pads for OZI 220/E grit 150
1 x	Fibre-Cut Discs
1 x	Professional polishing sponge

€5,667.36