€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	Broca de alta duração de 0.4mm
1 x	Tungsten carbide cutter 1.0mm
1 x	Diamond Grinding Bits 1mm
2 x	Slot cutter 6.5mm
1 x	V-slot cutter 6.5mm
2 x	Solid carbide stylus for engraving
1 x	Rebating cutter 6.4mm
1 x	Felt polishers
2 x	6pcs Double Open End wrench set
3 x	TIP SPT-9
1 x	Diamond Grinding Bits 1,8mm
1 x	Antiallergical Tweezers 5-107-1
2 x	TIP SPT-10
1 x	Flexible polishing pad set
1 x	6-piece screwdriver set ESD
1 x	Cups brushes
1 x	6-piece screwdriver and cross-recess set
1 x	10-piece wood router cutter set
1 x	Diamond Cutting Discs
1 x	ACCENT SERVICE TOOLS SET
1 x	Broca de alta duração de 2.0mm
1 x	Broca de alta duração de 1.1mm
1 x	BIT-SET
1 x	Felt polishers
1 x	Hot wire cutter THERMOCUT 230/E
1 x	EUROline set of pliers
1 x	EUROline snipe nose pliers
1 x	Parting tool 10mm
1 x	EUROline flat nose pliers
2 x	TIP SPT-4
2 x	centrically clamping 100mm
2 x	quantum revolving center CM2
1 x	MICRO Miller FF 500
1 x	Stainless steel wheels
1 x	Telephone pliers stright 205mm
2 x	4-jaw chuck individually clamping 100mm
2 x	Stainless steel cups
2 x	Collet chuck ER25 for D250X550
1 x	MICRO-screwdrivers
1 x	MICRO Heat gun MH 550
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	DIL40/QFP64-1 ZIF-CS NEC-1
1 x	EUROline round nose pliers
1 x	Aluminium Die-Cast
1 x	Independent four jaw chuck for the DB 250
1 x	Mill/Drill System BFW 40/E
1 x	Metal Cutting Blades
1 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	MICRO Miller MF 70
1 x	lathe tools 10mm
1 x	Telephone pliers bent 165mm
1 x	Steel brushes
1 x	ESD-handling ser 9-361
1 x	TIP SPT-2
1 x	DIL32/QFP64 ZIF H8-1
1 x	Stainless steel brushes
1 x	Sanding Discs
1 x	3-jaw chuck centrically clamping 80mm
1 x	SCLCR1010E06
1 x	Sanding pads for OZI 220/E grit 150
1 x	Jig saw STS 12/E
1 x	Sanding Drums
1 x	Side cutters 160mm
1 x	BeeHive204
1 x	Boring Bar for DCMT 10mm
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Collet chuck ER32 for D250X550
1 x	Side cutters 160mm
1 x	Long neck angle grinder LHW
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	ESD Tweezers 5-193
1 x	Face clamping disc for D250X550
1 x	Wheels brushes
1 x	Mini side cutters EUROline-Conductive
1 x	Flap Wheels
1 x	Belt sander BS/E
1 x	Telephone pliers straight 205mm
1 x	4-jaw chuck individually clamping 125mm
1 x	3-jaw chuck centrically clamping 125mm
1 x	DIL40/QFP80 ZIF M37702
1 x	MICRO cutter MIC
1 x	Jig saw blades made of HSS
1 x	Lambswool polishing disc
1 x	MICROMOT 50/E
1 x	lathe tools 8mm
1 x	Wolfram vanadium steel milling bits
1 x	Magnetic base
1 x	DIL24/TSSOP24 ZIF 170mil
1 x	sclcr2525M12
1 x	SmartProg2
1 x	MICROMOT drill stand MB 200
1 x	TIP SPT-3
1 x	DIL28/QFP52 ZIF-CS SX52
1 x	lathe tools 12mm
1 x	centrically clamping 125mm
1 x	Mini side cutters EUROline-Conductive
1 x	EUROline mini side cutter
1 x	ESD Tweezers 5-195
1 x	Steel cups
1 x	MICRO Miller FF 230
1 x	Tool holder type H for SWH 1-A
1 x	Broca de alta duração de 0.8mm
1 x	Replacement belts for BSL 220/E
1 x	Steel tape measure
1 x	BGA-0245/0243
1 x	DIL40/TQFP44 ZIF PIC-1
1 x	Follow rest for D250X550
1 x	DIL40/TQFP64 ZIF CC-1
1 x	Replacement glue sticks for HKP 220
1 x	Morse taper MT2 - B16
1 x	BGA-0245/0242
1 x	Flap Wheels
1 x	BGA-Bottom-10
1 x	Broca de alta duração de 1.0mm
1 x	Broca de alta duração de 0.7mm
1 x	BGA-0245/0241
1 x	BGA-Bottom-115
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	DIL40/TQFP52 ZIF EM652X
1 x	Slot cutter 3.2mm
1 x	BGA-Bottom-108
1 x	DIL48/TQFP100 ZIF ST92Fxxx
1 x	Lathe chuck flange for D250X550
1 x	DIL44/TQFP44-3 ZIF
1 x	DIL48/TQFP144 ZIF ST10-1
1 x	Broca de alta duração de 1.4mm
1 x	Lathe tools 10mm pastilhados
1 x	Broca de alta duração de 2.1mm
1 x	BGA-0246/0243
1 x	Broca de alta duração de 1.2mm
1 x	BGA-0246/0244
1 x	Replacement belts for BSL 220/E
1 x	Universal polishing paste
1 x	BGA-Bottom-103

€16,068.28