€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

1 x	Precision steel vice PM 40
1 x	Slot cutter 5.0mm
1 x	Machine Vice MS 4
2 x	Tungstein carbide rasp - and cutting disc
1 x	Edge cutter with pin 6.4mm
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Five piece HSS chisel set
1 x	Combi cutter 6.5/2.5mm
2 x	Grinding mop cylinder grit 240
1 x	Diamond Coated
1 x	Three jaw chuck for the lathe DB 250
1 x	10-piece wood router cutter set
2 x	Tungsten Carbide Tipped (TCT)
1 x	Slot cutter 6.5mm
2 x	Broca de alta duração de 2.7mm
1 x	Slot cutter 3.2mm
1 x	Rounding over cutter 6.4mm
1 x	Step clamps made of steel
1 x	Tungsten carbide cutters set
1 x	V-slot cutter 6.5mm
1 x	Core box bit 3.2mm
1 x	Rebating cutter 6.4mm
1 x	Angle cutter 45 °
1 x	Half round cutter 13mm
1 x	Independent four jaw chuck for the DB 250
1 x	Super-Cut
1 x	PLCC Puller
2 x	Broca de alta duração de 2.9mm
1 x	Diamond-coated cutting disc for MIC
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Supercut jig saw blades of special steel
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Silicon-Carbide.
1 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x	Replacement belts for BSL 220/E
1 x	Replacement belts for BSL 220/E
1 x	Jig saw blades made of HSS
1 x	Cutting disc, with reinforcement
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	Replacement belts for BSL 220/E
1 x	Special Fused Alumina (Hardness N).
1 x	Polishing Set
1 x	Replacement belts for BSL 220/E
3 x	Broca de alta duração de 2.1mm
3 x	Broca de alta duração de 0.8mm
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
3 x	broca de alta duração de 0,6mm
3 x	Broca de alta duração de 1.5mm
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
3 x	Broca de alta duração de 0.4mm
3 x	Broca de alta duração de 1.0mm
3 x	Broca de alta duração de 1.1mm
3 x	Broca de alta duração de 1.2mm
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Coarse-toothed (10 TPI per 25mm)
3 x	Broca de alta duração de 2.3mm
3 x	Broca de alta duração de 1.3mm
1 x	Blade holders for DS 460
3 x	Broca de alta duração de 2.0mm
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
3 x	Broca de alta duração de 2.2mm
1 x	Blade for Wood and Plastics
3 x	broca de alta duração de 0,2mm
1 x	Coarse-toothed (25 TPI per 25mm)
3 x	Broca de alta duração de 2.4mm
3 x	Broca de alta duração de 0.5mm
1 x	Multiform grindstone
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Coarse-toothed (18 TPI per 25mm)
3 x	Broca de alta duração de 0.3mm
1 x	Diamond blade for MBS 240/E
1 x	Grinding mop cylinder grit 120
1 x	Fluted filter for CW-matic
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Replacement carving blades for MSG
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Grinding mop cylinder grit 80
3 x	Broca de alta duração de 0.9mm
1 x	Blade guides separately
1 x	Fine dust paper filter for CW-matic
1 x	Blade for Steel and brass
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
3 x	Broca de alta duração de 1.4mm
1 x	Grinding mop cylinder grit 120
1 x	Corundum fan sander for LWS
1 x	Solid carbide saw blade
1 x	Corundum grinding disc for LWS
1 x	Broca de alta duração de 3.0mm
1 x	sandpaper for PS 13 Grot 180
1 x	Microfibre cloth
1 x	Corundum grinding disc for LWS
2 x	Backing disc for LWS
1 x	Broca de alta duração de 2.8mm
1 x	sandpaper for PS 13 Grit 240
1 x	Crosscut 'Super-Cut' blade
1 x	Super-fine sanding discs grain 2000
1 x	Sanding fleece for LWS
1 x	Replacement glue sticks for HKP 220
1 x	Beeprog2C
1 x	Professional polishing sponge
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Corundum sanding discs for LWS
1 x	Diamond blade
1 x	Corundum bound cutting disc for LWS
1 x	Sanding fleece for LWS
1 x	Lambswool polishing disc
1 x	Super-fine sanding discs grain 000
1 x	Diamond-coated cutting and roughing disc
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Polishing felt, medium hard
1 x	Corundum sanding discs for LWS
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Insulation Resistance Tester MG125
1 x	sandpaper for PS 13 Grit 400
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Super-fine sanding discs grain 400
1 x	Corundum fan sander for LWS
1 x	Professional set for finish grinding and polishing
1 x	Saw blade made of high-alloy special steel
1 x	Broca de alta duração de 2.5mm
1 x	Tungsten tipped saw blade
1 x
1 x	sanding belts for BBS/s Grit 240
1 x	sanding belts for BBS/s Grit 150
1 x	BeeProg2

€3,778.12