€410.00 + VAT

BGA-Top-132 ZIF-CS
[70-0724]

top board of BGA converters
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations

Socket ZIF BGA64 (accept package up to 80 balls), ClamShell type
Bottom 4 rows, 4x 25 pins, square, 0.6x0.6mm
Class BGA
Subclass BGA-Top

Converter manual
For work with BGA device it is necessary put together BGA-Top-132 ZIF-CS with some BGA-Bottom-x board according to the information provided by PG4UW software.
Do not directly touch the pins of the converter, because dirt may cause errors during programming of device.

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Self-adhesive white corundum sanding discs for TG 250/E
2 x	Sanding fleece for LWS
1 x	Flat nose pliers 160mm
1 x	Replacement glue sticks for HKP 220
2 x	sanding belts for BBS/s Grit 80
1 x	Diamond-coated cutting disc for MIC
1 x	Footswitch FS
2 x	Replacement carving blades for MSG
1 x	MICROMOT drill stand MB 200
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Coarse-toothed (18 TPI per 25mm)
2 x	Corundum grinding disc for LWS
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	10-piece wood router cutter set
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	ESD Brushe
1 x	Flexishaft MICROMOT 110/BF
1 x	Half round cutter 13mm
1 x	Rounding over cutter 6.4mm
1 x	Core box bit 3.2mm
1 x	Combination pliers 185mm
1 x	Telephon pliers bent 200mm
1 x	Slot cutter 5.0mm
1 x	sanding belts for BBS/s Grit 240
1 x	Slot cutter 3.2mm
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Backing disc for LWS
1 x	sanding belts for BBS/s Grit 150
1 x	Combination pliers 205mm
2 x	Corundum bound cutting disc for LWS
1 x	MICROMOT extension cord. 300cm.
1 x	Edge cutter with pin 6.4mm
1 x	BGA-Bottom-199
1 x	BGA-Bottom-201
1 x	DIL32/SDIP64-1 ZIF Toshiba-BM1136
1 x	Tweezer teflon-coated 5-107-9
1 x	BGA-Top-3 ZIF-CS
1 x	BGA-Bottom-204
2 x	Diamond Coated
1 x	DIL40/VQFP64 ZIF AWM-1
1 x	Bottom PSOP44 NOR-3
1 x	DIL48/SSOP56 ZIF Flash-1
1 x	Fibre-Cut Discs
2 x	Fibre-Cut Discs
1 x	Super-Cut
1 x	BGA-Bottom-209
1 x	BGA-Bottom-194
1 x	BGA-Bottom-20
1 x	DIL48/SSOP56 ZIF Flash-3
1 x	DIL48/MQFP80 ZIF C164
1 x	BGA-Bottom-2
2 x	Silicon-Carbide.
1 x	BGA-Bottom-222
2 x	Special Fused Alumina (Hardness N).
1 x	Tungsten Carbide Tipped (TCT)
1 x	DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x	Fibre-Cut Discs
1 x	MICROMOT glue gun HKP 220
1 x	Cotton polishers
1 x	BGA-Bottom-21
1 x	BGA-Bottom-225
2 x	Diamond Cutting Discs
1 x	BGA-Top-5 ZIF-CS
1 x	BGA-Bottom-215
1 x	BGA-Bottom-191
1 x	Fluted filter for CW-matic
1 x	BGA-Bottom-218
1 x	BGA-Bottom-202
1 x	DIL34/SSOP34 ZIF 200 mil
1 x	Diamond Cutting Discs
1 x	BGA-Bottom-192
1 x	BGA-Bottom-207
1 x	Diamond Cutting Discs
1 x	Tweezer teflon-coated 5-021-9
1 x	BGA-Bottom-229
1 x	DIL34/SSOP34-1 ZIF-CS
1 x	Polishing Set
1 x	Multiform grindstone
1 x	BGA-Bottom-198
1 x	MICROFLAM gas soldering set MGS

€4,994.49