€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	Dividing attachment TA 230 for PF 250
3 x	Aluminium Die-Cast
2 x	MICROMOT extension cord. 300cm.
3 x	Three-jaw steel drill chuck
3 x	MICROMOT drill stand MB 200
3 x	MICROMOT steel collet set
3 x	Mill/Drill Unit BFB 2000.
4 x	Footswitch FS
2 x	Protective device for hand-operated MICROMOT
3 x	MICROMOT tool holder
2 x	Micro Compound Table KT 70
2 x	Lathe System PD 400
2 x	Tungstein carbide rasp - and cutting disc
1 x	DIL48/MQFP80 ZIF C164
1 x	DIL48/MQFP80 ZIF C500
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Cutting disc, with reinforcement
1 x	Tungsten Carbide Tipped (TCT)
2 x	Machine Vice MS 4
2 x	Three piece thread cutting set
2 x	Multipurpose Vices Primus100
1 x	Super-fine sanding discs grain 000
1 x	Flexishaft MICROMOT 110/BF
1 x	Telephon pliers straight 160mm
1 x	Multipurpose Vices Primus 75
1 x	BGA-Bottom-101
1 x	BGA-Bottom-127
1 x	DIL40/TSOP40 ZIF 18.4mm
1 x	PLCC Extractor
2 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Spare cutting wire
3 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	BGA-Bottom-126
1 x	Side cutters 195mm
1 x	DIL28/TSOP28 ZIF 11.8 mm
1 x	End side cutters EUROline-Conductive
1 x	DIL42/SDIP42 ZIF 600mil
1 x	BGA-0245/0243
1 x	Component tweezers 5-013
1 x	DIL40/SDIP52 ZIF 55x
1 x	Coarse-toothed (10 TPI per 25mm)
2 x	Telephon pliers bent 160mm
2 x	sanding belts for BBS/s Grit 80
1 x	Round nose pliers 165mm
1 x	BGA-Bottom-1
1 x	DIL48/TSOP48 ZIF 15.4mm
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-5
2 x	Crimping plier for BNC
2 x	sanding belts for BBS/s Grit 150
1 x	BGA-Bottom-115
1 x	Precision Vice FMZ
1 x	DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x	DIL40/TQFP44-1 ZIF MCS51
1 x	DIL48/TQFP144 ZIF ST10-1
1 x	End side cutters 45º EUROline-Conductive
1 x	EUROline mini side cutter
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	DIL48/TQFP100-2 ZIF PLD-1
3 x	Coarse-toothed (25 TPI per 25mm)
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-6
1 x	DIL32/TSOP32 ZIF 11.8mm
1 x	BGA-Bottom-108
2 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	DIL40/TQFP52 ZIF EM652X
2 x	Coarse-toothed (18 TPI per 25mm)
1 x	Component tweezers 5-007
1 x	Mini side cutters EUROline-Conductive
1 x	DIL44/QFN44-2 ZIF-CS
1 x	BGA-0246/0244
1 x	Conj 5 pinças ESD
1 x	Component tweezers 5-008
1 x	Blade holders for DS 460
1 x	Combination pliers 205mm
1 x	DIL40/VQFP64 ZIF AWM-1
1 x	DIL32/TSOP32 ZIF 18.4mm Flash
3 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Round nose pliers 160mm
1 x	Side cutters 170mm
1 x	DIL44/TQFP44-2 ZIF
1 x	Ceramic-tipped tweezers and ESD 5-095
1 x	Brass contact cleaner brush
1 x	DIL40/TQFP44 ZIF EM652X
1 x	Safety Insulated Pozidriv Screwdriver 14-641VDE
1 x	BGA-Bottom-105
2 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	BGA-Bottom-118
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	DIL44/TSOP44-II ZIF 400mil
1 x	DIL48/TSOP48 ZIF 18.4mm
1 x	Component tweezers 5-009
1 x	Safety Insulated Phillips Screwdriver 14-634VDE
1 x	sanding belts for BBS/s Grit 240
1 x	Precision caliper square
3 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Side cutters 160mm
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-1
1 x	Combination pliers 170mm
1 x	Component tweezers 5-006
1 x	Safety Insulated Phillips Screwdriver 14-633VDE
2 x	BGA-Bottom-106
1 x	Safety Insulated Phillips Screwdriver 14-631VDE
1 x	DIL48/SDIP56 ZIF 68HC05Bx
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	EUROline mini side cutter
1 x	Side cutters EUROline-Conductive
1 x	Ceramic tweezers 5-082
1 x	Grinding mop cylinder grit 80
2 x	BGA-Bottom-111
1 x	DIL40/TQFP80-1 ZIF PIC-1A
1 x	Flat nose pliers 165mm
1 x	Contact bracelet with spiral cord
1 x	DIL32/TSOP32 ZIF 18.4mm Flash
1 x	PVC-insulated tweezers 5-117-6
1 x	Universal polishing paste
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-2
1 x	DIL40/TQFP44 ZIF AWM-1
2 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	DIL40/TQFP44 ZIF PIC-1
1 x	DIL32/SDIP64-1 ZIF Toshiba-BM1136
1 x	Side cutters 180mm
1 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x	Precision Vice FMS 75
1 x	DIL32/SDIP32 ZIF 400mil
2 x	BGA-Bottom-103
1 x	BGA-Bottom-125
1 x	DIL48/TQFP64 ZIF HC908-1
1 x	DIL48/TQFP48-1 ZIF
1 x	Combination pliers 160mm
1 x	DIL28/QFN28-2 ZIF-CS
1 x	PVC-insulated tweezers 5-121-6
1 x	DIL44/TQFP44-3 ZIF
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-3
1 x	Combination pliers 190mm
1 x	DIL24/QSOP24 ZIF 150mil
1 x	BGA-0246/0243
1 x	Safety Insulated Phillips Screwdriver 14-632VDE
2 x	BGA-Bottom-10
1 x	PLCC Puller
1 x
1 x	DIL40/TQFP64 ZIF PIC-1A
1 x	DIL48/TQFP100 ZIF PLD-2
1 x	BGA-0245/0241
1 x	Combination pliers 210mm
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	DIL40/TQFP64 ZIF AVRmega-2
1 x	BGA-Bottom-11
1 x	Precision steel vice PM 40
1 x	DIL40/TQFP80-1 ZIF AWM-1
1 x	DIL48/TQFP100 ZIF ST92Fxxx
1 x	Replacement carving blades for MSG
1 x	DIL32/SDIP64 ZIF H8-1
1 x	PRECISION WIRE STRIPPER ESD-PLUS
1 x	Combination pliers 185mm
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	DIL40/TSOP40 ZIF 18.4mm Flash-1
1 x	BGA-Bottom-102
1 x	PVC-insulated tweezers 5-107-6
1 x	DIL40/QFP64 ZIF LPC-1
1 x	DIL28/QFP64 ZIF H8/3644
1 x	BeeProg2
1 x	DIL48/QFP100 ZIF PLD-3
1 x	Combination pliers 185mm

€21,830.84