Top » Catalog » Elnec » 60-0059

€859.00 + VAT

Beeprog2C
[60-0059]

Very fast universal USB/LPT interfaced programmer.

If you re focused to maximal speed of programing, see please at extremely fast BeeProg2C programmer.

Short description:

supported devices from manufactures
extremely fast programming, one of the fastest programmers in this category. Sustainable programming speed greater than 5 MBytes per second. Programs 2 GB eMMC NAND Flash in less than 365 sec.
48-pins powerful pindrivers, no adapter required for any DIL devices
ISP connector for in-circuit programming
connection to PC: USB 2.0 (up to 480 Mbit/s, high speed/full speed) and 1.1 compatible interface
after upgrade to BeeProg2, also high-speed IEEE 1284 (ECP/EPP) printer-port (LPT) interface is available
comfortable and easy to use control program, works with all versions of MS Windows from Windows XP to Windows 10 (32-bit and 64-bit*)
unique quick reaction to customer's needs - software update can be ready within a day from request by OnDemand software
Multiprogramming possible by attaching more programmers to one PC
made in Slovakia
warranty - 3 years

More Information here: http://www.elnec.com/products/universal-programmers/beeprog2c/

Reviews

Customers who bought this product also purchased

BGA-Top-5 ZIF-CS

BGA-Bottom-88

DIL44/PSOP44 ZIF 600 mil

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	Insulation Resistance Tester MG500
2 x	Centre Turning Attachment
2 x	Gear Chuck
2 x	Four Jaw Chuck
3 x	Diamond-coated cutting and roughing disc
1 x	Steel cups
2 x	Corundum grinding disc for LWS
1 x	Stainless steel cups
2 x	Compact workshop vacuum cleaner CW-matic
3 x	Professional polishing sponge
2 x	Lambswool polishing disc
1 x	Cups brushes
2 x	Super-fine sanding discs grain 2000
1 x	Wheels brushes
3 x	Super-fine sanding discs grain 400
2 x	Professional set for finish grinding and polishing
2 x	Sanding fleece for LWS
2 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
2 x	Corundum fan sander for LWS
2 x	High quality corundum grinding bits
2 x	Corundum sanding discs for LWS
1 x
2 x	Complete Engraving Kit with trial glass
2 x	Felt polishers
2 x	Corundum grinding disc for LWS
2 x	Protective device for hand-operated MICROMOT
2 x	High quality corundum grinding bits
2 x	Engraving tool GG
1 x	Stainless steel brushes
2 x	Flexible silicon discs
1 x	Diamond Cutting Discs
2 x	Mill/Drill Unit BFB 2000.
2 x	Rounding over cutter 6.4mm
1 x	Polishing paste
2 x	Micro Compound Table KT 70
1 x	High quality corundum grinding bits
2 x	Corundum sanding discs for LWS
1 x	Broca de alta duração de 3.0mm
2 x	Flexible polishing pad set
2 x	Corundum fan sander for LWS
2 x	Flexible silicon discs
3 x	Backing disc for LWS
2 x	MICRO Heat gun MH 550
1 x	Diamond Grinding Bits 5mm
2 x	Felt polishers
1 x	V-slot cutter 6.5mm
2 x	Combi cutter 6.5/2.5mm
1 x	Diamond Grinding Bits 1,8mm
1 x	Cylinder sander WAS/E
1 x	Half round cutter 13mm
1 x	Diamond Grinding Bits 1,8mm
2 x	Router base OFV
1 x	Ball-shaped diamond coated 1.2mm
1 x	Table Saw TKS 2500 SC
1 x	Fibre-Cut Discs
1 x	MICROMOT extension cord. 300cm.
1 x	Universal polishing paste
2 x	MICROMOT glue gun HKP 220
1 x	Diamond Grinding Bits 1mm
2 x	Steel brushes
2 x	Rebating cutter 6.4mm
1 x	Broca de alta duração de 2.7mm
2 x	Core box bit 3.2mm
1 x	Aluminium Die-Cast
1 x	Brass brushes
2 x	Flexible silicon discs
1 x	14-piece parallel supports set
2 x	Dividing attachment TA 230 for PF 250
2 x	Slot cutter 3.2mm
1 x	Cotton polishers
2 x	Footswitch FS
1 x	MICROMOT drill stand MB 200
1 x	Collet Set for accurate use on round components
1 x	Broca de alta duração de 2.8mm
2 x	Corundum bound cutting disc for LWS
2 x	Edge cutter with pin 6.4mm
1 x	Belt sander BBS/S
1 x	Broca de alta duração de 2.9mm
1 x	Insulation Resistance Tester MG125
1 x	Broca de alta duração de 2.4mm
1 x	Felt polishers
3 x	BeeHive204
1 x	Cotton polishers
1 x	Fibre-Cut Discs
1 x	Fibre-Cut Discs
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
2 x	Flexible polishing pad set
2 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	Stainless steel wheels
1 x	High quality corundum grinding bits
1 x	Universal holder UHZ
1 x	High quality corundum grinding bits
2 x	Slot cutter 6.5mm
2 x	Diamond Cutting Discs
2 x	Diamond Cutting Discs
2 x	MICRO-screwdrivers
1 x	MICROMOT steel collet set
1 x	sanding belts for BBS/s Grit 240
2 x	Felt polishers
1 x	Broca de alta duração de 2.1mm
1 x	IC Test clip 20 pins
1 x	Broca de alta duração de 2.6mm
1 x	Table Sawr TKS 315 E
1 x	Milling cutter set (6 - 10mm)
2 x	Three-jaw steel drill chuck
1 x	surface planing and thicknessing ADH 200
1 x	PRECISION WIRE STRIPPER ESD-PLUS
2 x	MICROMOT tool holder
1 x	MICROFLAM gas soldering set MGS
2 x	Super-fine sanding discs grain 000
1 x	Microfibre cloth
1 x	Milling cutter set (2 - 5mm)
1 x	High quality corundum grinding bits
1 x	Cotton polishers
1 x	Pinça SOIC de 8 pinos
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Diamond Cutting Discs
1 x	Diamond Twist Drills
1 x	MICROFLAME burner MFB/E
2 x	Flexishaft MICROMOT 110/BF
1 x	BeeHive208S
2 x	Fine dust paper filter for CW-matic
1 x	Sanding fleece for LWS
1 x	Flexishaft MICROMOT 110/P
2 x	Tungstein carbide rasp - and cutting disc
1 x	Angle cutter 45 °
1 x	sanding belts for BBS/s Grit 80
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Three piece thread cutting set
2 x	Super-Cut
1 x	EPROM/Flash-PLCC32-2-DIL32 socket submodule
1 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
2 x	Grinding mop cylinder grit 80
2 x	Diamond Coated
1 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	MICROMOT 50
1 x	Jig saw STS 12/E
1 x	Machine Vice MS 4
1 x	Precision Drill/Grinder FBS 240/E
1 x	2-speed scroll saw DSH
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
2 x	Table Saw FET
1 x	Cut off/mitre saw KGS 80
1 x	Multiform grindstone
1 x	Long neck straight drill/grinder LB/E
1 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x	Cutting disc, with reinforcement
1 x	Bench drill press TBH
1 x	Grinding mop cylinder grit 120
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	MICRO cutter MIC
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Bench drill machine TBM 220
1 x	Precision drill grinder FBS 12/EF
1 x	MICRO shaper MP 400
1 x	Replacement carving blades for MSG
1 x	MICRO Miller MF 70
1 x	Precision lathe PD 250/E
1 x	MICROMOT 230/E
1 x	MICRO Miller FF 230
1 x	Universal and oil siphoning pump AP 12
1 x	Motor-driven carving device MSG
1 x	Step clamps made of steel
1 x	Lathe System PD 400
1 x	MICROMOT 50/E
1 x	Scroll saw DS 230/E
1 x	TIP SPT-2
1 x	Precision steel vice PM 40
2 x	Grinding mop cylinder grit 120
1 x	Tungsten carbide cutters set
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Professional Drill/Grinder IBS/E
1 x	Surface planer AH 80
1 x	Bench Circular Saw KS 230
1 x	Grinding mop cylinder grit 240
1 x	Thicknesser DH 40
1 x	MICRO Band Saw MBS 240/E
1 x	PLCC Extractor
1 x	Angle polisher WP/E
1 x	sanding belts for BBS/s Grit 150
1 x	Super jig saw STS/E
1 x	SCLCR1010E06

€32,627.63

Quick Find

We Accept

Manufacturer Info


-	Elnec Homepage
-	Other products

What's New?

Corundum fan sander for LWS
€4.45

Languages

Share Product

€859.00 + VAT

Beeprog2C[60-0059]

Beeprog2C
[60-0059]