€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Sanding Drums
1 x	Diamond Twist Drills
1 x	Nylon Fleece Brushes
1 x	Diamond Cutting Discs
1 x	Diamond Grinding Bits 1mm
2 x	Super jig saw STS/E
1 x	Diamond Grinding Bits 1,8mm
1 x	Sanding Drums
2 x	MICRO shaper MP 400
2 x	Surface planer AH 80
1 x	Sanding bands 14x13mm
2 x	MICRO cutter MIC
2 x	HSS cutting blade for OZI
1 x	V-slot cutter 6.5mm
1 x	Complete Engraving Kit with trial glass
1 x	Stainless steel cups
1 x	Blade for Wood and Plastics
2 x	MICROMOT Mains Adapter NG 2/S
1 x	Diamond Cutting Discs
1 x	MICRO woodturning lathe DB 250
1 x	Brass brushes
1 x	IC Test clip 20 pins
1 x	Steel cups
2 x	Sanding pads for OZI 220/E grit 80
1 x	Cone shaped milling cutter
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Cut off/mitre saw KGS 80
1 x	Footswitch FS
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
2 x	Three jaw chuck for the lathe DB 250
2 x	10-piece wood router cutter set
1 x	Mini side cutters EUROline-Conductive
1 x	Delta sander OZI/E
1 x	Wood Lathe DB900
2 x	sandpaper for PS 13 Grot 180
1 x	Independent four jaw chuck for the DB 250
1 x	Side cutters 160mm
1 x	EUROline mini side cutter
1 x	Cutting tool 8 mm
2 x	ESD-handling set
1 x	Side cutters 180mm
1 x	Cutting tool 16 mm
1 x	lathe tools 12mm
2 x	Rounding over cutter 6.4mm
1 x	Replacement glue sticks for HKP 220
2 x	IC tweezers
1 x	Side cutters 160mm
3 x	Edge cutter with pin 6.4mm
1 x	sandpaper for PS 13 Grit 240
1 x	Grinding and Polishing Machine SP/E
2 x	Combi cutter 6.5/2.5mm
2 x	Half round cutter 13mm
1 x	Side cutters EUROline-Conductive
1 x	sandpaper for PS 13 Grit 400
1 x	Slot cutter 3.2mm
1 x	Slot cutter 5.0mm
1 x	Polishing machine PM 100
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	EUROline mini side cutter
1 x	Core box bit 3.2mm
1 x	PLCC Extractor
1 x	Five piece HSS chisel set
1 x	EUROline mini side cutter
1 x	sanding belts for BBS/s Grit 150
1 x	HSS immersion saw blades for OZI
1 x	End side cutters EUROline-Conductive
1 x	Cutting tool HM 20 mm
1 x	Angle cutter 45 °
1 x	Jig saw blades made of HSS
1 x	Slot cutter 6.5mm
1 x	Cylinder sander WAS/E
1 x	Cutting tool 10 mm
1 x	Conj 5 pinças ESD
2 x	Corundum sanding discs for LWS
1 x	Corundum bound cutting disc for LWS
1 x	ESD Tweezers 5-193
1 x	EUROline-Conductive set of pliers
2 x	ACCENT SERVICE TOOLS SET
1 x	Conjunto de três brocas de ponto
1 x	Hand Magnifier 2-293
1 x	ESD Tweezers 5-191
2 x	Corundum fan sander for LWS
1 x	ESD Tweezers 5-192
1 x	ESD Tweezers 5-195
1 x	Broca de ponto 3.15 x 1.25
1 x	surface planing and thicknessing ADH 200
1 x	Hand magnifier with LED light 3X
2 x	Diamond-coated cutting and roughing disc
1 x	Corundum grinding disc for LWS
1 x	BGA-Bottom-111
1 x	BGA-Bottom-101
1 x	BGA-0246/0244
1 x	Sanding fleece for LWS
1 x	BGA-Bottom-125
1 x	BGA-0245/0242
1 x	BGA-Bottom-106

€6,833.21