€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x	Centre Turning Attachment
2 x	Self-adhesive white corundum sanding discs for TG 250/E
2 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	Collet Set for accurate use on round components
1 x	MICRO Miller FF 230
1 x	Fixed Steady
1 x	Radius Cutting Attachment, complete with pointed tool
2 x	Self-adhesive white corundum sanding discs for TG 250/E
2 x	ESD Brushe
2 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	ESD Brushe
1 x	Cutting disc, with reinforcement
1 x	Combination pliers 210mm
1 x	ESD Tweezers 5-194
1 x	EUROline mini side cutter
1 x	End side cutters EUROline-Conductive
1 x	EUROline mini side cutter
1 x	EUROline round nose pliers
2 x	MICROMOT Mains Adapter NG 2/S
1 x	Combination pliers 185mm
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	Micro Compound Table KT 70
1 x	Component tweezers 5-006
1 x	Corundum grinding disc for LWS
1 x	ESD Tweezers 5-193
1 x	EUROline end cutter
1 x	EUROline mini side cutter
1 x	EUROline mini side cutter
1 x	Cylinder shaped milling cutters
1 x	ESD Tweezers 5-192
1 x	ESD Tweezers 5-195
1 x	Combination pliers 170mm
2 x	Chuck for TBM 220
1 x	Corundum fan sander for LWS
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	EUROline set of pliers
1 x	Corundum fan sander for LWS
1 x	Core box bit 3.2mm
1 x	Ceramic-tipped tweezers and ESD 5-096
2 x	MICROMOT Mains Adapter NG 5/E
1 x	Combination pliers 185mm
1 x	Cups brushes
1 x	Corundum sanding discs for LWS
1 x	ESD Tweezers 5-191
1 x	Cotton polishers
1 x	Cotton polishers
1 x	Conjunto de três brocas de ponto
1 x	EUROline side cutter pointed head
1 x	Crimping plier for BNC
1 x	sanding belts for BBS/s Grit 240
1 x	Corundum grinding disc for LWS
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Crosscut 'Super-Cut' blade
1 x	Cylinder sander WAS/E
1 x	Cut off/mitre saw KGS 80
1 x	sanding belts for BBS/s Grit 80
1 x	Conj 5 pinças ESD
1 x	Corundum sanding discs for LWS
1 x	Cotton polishers
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	ESD-handling ser 9-361
1 x	Diamond Cutting Discs
1 x	BGA-0245/0242
1 x	Flap Wheels
1 x	Diamond Coated
2 x	Tungsten tipped saw blade
1 x	Mini side cutters EUROline-Conductive
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Cone shaped milling cutter
1 x	BGA-0245/0243
1 x	BGA-0245/0241
1 x	FREEZER-BR 200ml
1 x	6-piece screwdriver and cross-recess set
1 x	Half round cutter 13mm
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	DUSTER-BR 200ml
1 x	BGA-Bottom-10
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Diamond-coated cutting disc for MIC
2 x	Disc Sander TG 125/E
1 x	Diamond Grinding Bits 1,8mm
1 x	Grinding mop cylinder grit 240
1 x	Fluted filter for CW-matic
1 x	BGA-0246/0244
1 x	BeeProg2
1 x	High quality corundum grinding bits
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Grinding mop cylinder grit 120
1 x	BGA-Bottom-102
1 x	Cross-recess Screwdrivers 1
1 x	Disc cutters
1 x	Cross-recess Screwdrivers 2
1 x	Beeprog2C
1 x	Diamond Cutting Discs
1 x	Diamond blade
1 x	BGA-Bottom-1
1 x	Flap Wheels
1 x	Cross-recess Screwdrivers 1
1 x	BGA-0246/0243
1 x	Saw blade made of high-alloy special steel
1 x	Disc Sander TG 250/E
1 x	Belt sander BBS/S
1 x	TIP SPT-6
1 x	BGA-Bottom-115
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Cross-recess Screwdrivers 0
1 x	Delta sander OZI/E
1 x	Cross-recess Screwdrivers 000
1 x	Solid carbide saw blade
1 x	BeeHive208S
1 x	Flexishaft MICROMOT 110/P
1 x	Flexible polishing pad set

€15,933.15