€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	FLUX DISPENSING PEN, LEAD FREE
3 x	Gear Chuck
3 x	Collet Set for accurate use on round components
3 x	Four Jaw Chuck
1 x	PROTECTION 200ml
1 x	Cone shaped milling cutter
2 x	Centre Turning Attachment
1 x	Blade for Wood and Plastics
1 x	Blade guides separately
1 x	Complete Engraving Kit with trial glass
4 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Brass brushes
3 x	Blade holders for DS 460
1 x	Flexible polishing pad set
1 x	Ball shaped milling cutters
1 x	Flexible silicon discs
1 x	Ball-shaped diamond coated 3.2mm
1 x	Cutting tools of high quality cobalt HSS steel, ground
2 x	Sanding pads for OZI 220/E grit 150
1 x	2-speed scroll saw DSH
2 x	Angle polisher WP/E
1 x	Flexible silicon discs
1 x	High quality corundum grinding bits
1 x	Flexible silicon discs
1 x	Flexible polishing pad set
1 x	Replacement cutting disc for MICRO cutter MIC
2 x	14-piece parallel supports set
4 x	Grinding mop cylinder grit 240
1 x	Lathe System PD 400
1 x	Blade for Steel and brass
2 x	Belt sander BBS/S
1 x	Ball-shaped diamond coated 1.2mm
1 x	Backing disc for LWS
3 x	Aluminium Die-Cast
1 x	Ball-shaped diamond coated 2.2mm
3 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
3 x	Footswitch FS
1 x	Bench Circular Saw KS 230
1 x	HSS boring tool set, 6 pieces
1 x	Bench drill press TBH
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x
4 x	10-piece wood router cutter set
1 x	Fixed Steady
1 x	Flap Wheels
1 x	Precision lathe PD 250/E
1 x	Bench drill machine TBM 220
1 x	Tool holder for rotary tools
1 x	Flap Wheels
3 x	Flexishaft MICROMOT 110/P
1 x	TIP SPT-3
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Component tweezers 5-007
1 x	Combination pliers 185mm
1 x	Glass fibre contact cleaner brush
1 x	Hand magnifier with LED light 3X
1 x	EUROline snipe nose pliers
1 x	Flat nose pliers 160mm
1 x	Glass fibre contact cleaner brush
3 x	Core box bit 3.2mm
1 x	Conj 5 pinças ESD
2 x	Floor cover ESD
2 x	MICROMOT steel collet set
1 x	Combination pliers 205mm
1 x	Combination pliers 185mm
1 x	Ceramic-tipped tweezers and ESD 5-096
1 x	Combination pliers 160mm
1 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	Crimping plier for BNC
1 x	Inpection mirror 1-978
3 x	V-slot cutter 6.5mm
2 x	Mini side cutters EUROline-Conductive
2 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	Component tweezers 5-009
1 x	Pensander PS 13
1 x	Hand Magnifier 2-293
1 x	Combination pliers 210mm
1 x	Component tweezers 5-008
1 x	EUROline-Conductive set of pliers
1 x	Flat nose pliers 185mm
1 x	IC tweezers
3 x	Rounding over cutter 6.4mm
1 x	Flat nose pliers 165mm
3 x	Polishing Set
1 x	Flat nose pliers 45º EUROline-Conductive
2 x	Diamond Coated
1 x	EUROline top cutter
1 x	Combination pliers 190mm
1 x	Delta sander OZI/E
1 x	Component tweezers 5-013
1 x	Component tweezers 5-006
3 x	Edge cutter with pin 6.4mm
1 x	Handy 1515
2 x	ESD Brushe
1 x	Inspector mirror
2 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Ceramic-tipped tweezers and ESD 5-095
1 x	Dividing attachment TA 230 for PF 250
1 x	Supercut jig saw blades of special steel
1 x	EUROline side cutter rounded head
1 x	Combination pliers 170mm
2 x	Special Fused Alumina (Hardness N).
3 x	Silicon-Carbide.
1 x	MICROMOT tool holder
2 x	Contact bracelet with spiral cord
1 x	Ceramic tweezers 5-082
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Screwdriver 0.8
1 x	Screwdriver 2.0
1 x	PRECISION WIRE STRIPPER ESD-PLUS
3 x	Precision Vice FMZ
3 x	Earthing module
2 x	Grinding mop cylinder grit 80
1 x	Screwdriver 2.5
1 x	Screwdriver 1.8
2 x	Crocodile clip
1 x	Cross-recess Screwdrivers 1
1 x	Cross-recess Screwdrivers 00
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Cross-recess Screwdrivers 2
3 x	Fluted filter for CW-matic
1 x	Screwdriver 1.2
1 x	Screwdriver 1.0
1 x	Screwdriver 1.5
1 x	Cross-recess Screwdrivers 000
1 x	Sanding pads for OZI 220/E grit 240
1 x	Screwdriver 2.0
1 x	HSS immersion saw blades for OZI
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Earth wire
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Screwdriver 1.5
2 x	Machine Vice MS 4
1 x	Tungsten Carbide Tipped (TCT)
1 x	Cross-recess Screwdrivers 1
2 x	Precision steel vice PM 40
1 x	HSS immersion saw blades for OZI
2 x	PROLUB 200ml
3 x	ESD-handling ser 9-361
2 x	Slot cutter 3.2mm
1 x	Ceramic tweezers 5-081
2 x	6-piece set of ESD/EGB tweezers
1 x	Brass contact cleaner brush
1 x	6-piece screwdriver and cross-recess set
1 x	Professional set for finish grinding and polishing
2 x	Angle cutter 45 °
2 x	Rebating cutter 6.4mm
1 x	BIT-SET
1 x	6-piece screwdriver set ESD
1 x	6-piece TORX-screwdriver-set ESD
1 x	Slot cutter 5.0mm
1 x	ACCENT SERVICE TOOLS SET
1 x	6-piece socket wrenches ESD
2 x	ESD-handling set
1 x	6-piece screwdriver and cross-recess set
1 x	Antiallergical Tweezers 5-107-1
1 x	6-piece wrench key set ESD
2 x	Combi cutter 6.5/2.5mm
1 x	6pcs Double Open End wrench set
1 x	6-piece screwdriver and cross-recess set ESD
1 x	End side cutters EUROline-Conductive
2 x	Precision Vice FMS 75
3 x	Chuck for TBM 220
3 x	Micro Compound Table KT 70
1 x	Mini side cutters EUROline-Conductive
1 x	SCREEN 200ml
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	Multipurpose Vices Primus 75
1 x	Side cutters 180mm
1 x	EUROline mini side cutter
1 x	Side cutters EUROline-Conductive
1 x	EUROline mini side cutter
1 x	Grinding mop cylinder grit 120
1 x	Side cutters 160mm
1 x	EUROline mini side cutter
1 x	DIL48/LQFP64 ZIF M38039/M39049
1 x	Side cutters 160mm
1 x	Screwdriver bit set. 49-piece.
1 x	DIL48/LQFP64 ZIF M16C/Tiny
1 x	EUROline mini side cutter
1 x	Side cutters 195mm
1 x	EPROM/Flash-PLCC32-2-DIL32 socket submodule
1 x	End side cutters 45º EUROline-Conductive
1 x	BeeHive208S
1 x	EUROline side cutter pointed head
1 x	Universal and oil siphoning pump AP 12
1 x	Mini side cutters EUROline-Conductive
1 x	DIL40/QFP144 ZIF H8S-1
1 x	BGA-Bottom-11
1 x	Independent four jaw chuck for the DB 250
1 x	IT 200 - Indirect dividing attachment
1 x	DIL40/QFP64-3 ZIF NEC-1
1 x	BGA-Bottom-111
1 x	Diamond blade

€21,120.72