€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	Metal Cutting Blades
2 x	Fibre-Cut Discs
1 x	Professional set for finish grinding and polishing
2 x	6-piece screwdriver and cross-recess set
2 x	Fibre-Cut Discs
2 x	Diamond Cutting Discs
1 x	Broca de ponto 8.00 x 3.15
2 x	Diamond-coated cutting and roughing disc
2 x	Grinding mop cylinder grit 120
2 x	Corundum grinding disc for LWS
1 x	Broca de ponto 3.15 x 1.00
1 x	Fibre-Cut Discs
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Broca de ponto 3.15 x 1.25
2 x	Corundum fan sander for LWS
1 x	Replacement glue sticks for HKP 220
2 x	Fibre-Cut Discs
1 x	Diamond Cutting Discs
2 x	Fibre-Cut Discs
1 x	Backing disc for LWS
1 x	Corundum sanding discs for LWS
1 x	Diamond Cutting Discs
2 x	Sanding fleece for LWS
1 x	Grinding mop cylinder grit 240
1 x	Tungstein carbide rasp - and cutting disc
1 x	Felt polishers
1 x	Face clamping disc for D250X550
1 x	Tool holder type H for SWH 1-A
1 x	Felt polishers
1 x	Tungsten carbide drills Ø1mm
1 x	Grinding mop cylinder grit 120
1 x	HSS drill bits 0.5mm
1 x	centrically clamping 125mm
1 x	HSS twist drill set with centring pin
1 x	Felt polishers
1 x	HSS twist drill set to DIN 338
1 x	HSS drill bits 1.6mm
1 x	Steady rest for D250X550
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	Machine Vice MS 4
1 x	Flexible silicon discs
1 x	Flexible polishing pad set
1 x	Morse taper MT2 - B16
1 x	Precision quick-action drill chuck 0-13mm B16
1 x	Cotton polishers
1 x	Follow rest for D250X550
1 x	Cutting tool 10 mm
1 x	Conjunto de três brocas de ponto
1 x	Felt polishers
1 x	HSS drill bits 1.2mm
1 x	Broca de alta duração de 2.1mm
1 x	Collet chuck ER25 for D250X550
1 x	sandpaper for PS 13 Grit 240
1 x	Polishing paste
1 x	4-jaw chuck individually clamping 125mm
1 x	TIP SPT-2
1 x	Precision Vice FMZ
2 x	Sanding Drums
1 x	Telephone pliers bent 205mm
2 x	Sanding Drums
2 x	Flap Wheels
1 x	Silicon-Carbide.
2 x	Nylon Fleece Brushes
1 x	quantum revolving center CM2
1 x	Flat nose pliers 185mm
1 x	Crimping plier for BNC
2 x	Precision quick-action drill chuck 0-16mm B16
2 x	EUROline top cutter
1 x	EUROline round nose pliers
1 x	Morse taper MT3 - B16
1 x	Telephon pliers bent 200mm
1 x	PLCC Puller
1 x	quantum revolving center CM1
1 x	Telephon pliers straight 160mm
2 x	Flat nose pliers 165mm
1 x	Telephone pliers straight 205mm
1 x	Telephone pliers stright 165mm
1 x	Handy 1515
1 x	TORX-screwdrivers T5
2 x	Sanding Discs
1 x	TORX-screwdrivers T4
2 x	Flat nose pliers 160mm
1 x	Telephon pliers straight 200mm
2 x	EUROline snipe nose pliers
1 x	Side cutters 160mm
1 x	Precision quick-action drill chuck 0-10mm B16
2 x	Sanding bands 14x13mm
1 x	Telephon pliers bent 160mm
2 x	Sanding Drums
1 x	Flap Wheels
1 x	Precision quick-action drill chuck 0-8mm B16
1 x	Revolving center with replacement lathe centers
1 x	Screwdriver 3.0
1 x	Screwdriver 3.0
1 x	Screwdriver 2.5
1 x	Sanding Drums
1 x	TORX-screwdrivers T10
1 x	TORX-screwdrivers T10
1 x	TORX-screwdrivers T9
2 x	TU 1503V
1 x	Component tweezers 5-008
1 x	Sanding Discs
1 x	Screwdriver bit set. 49-piece.
1 x	Component tweezers 5-013
1 x	Component tweezers 5-006
1 x	TORX-screwdrivers T15
2 x	IC tweezers
1 x	Sanding bands 14x13mm
1 x	Component tweezers 5-007
1 x	Screwdriver 3.0
1 x	Safety Insulated Phillips Screwdriver 14-631VDE
1 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x	Component tweezers 5-009
2 x	6-piece screwdriver and cross-recess set ESD
1 x	Inspector mirror
1 x	EUROline-Conductive set of pliers
1 x	EUROline side cutter rounded head
1 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	Hand Magnifier 2-293
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Glass fibre contact cleaner brush
1 x	Wrench Keys 1.3
1 x	Glass fibre contact cleaner brush
1 x	Wrench Keys 0.7
1 x	Wrench Keys 0.9
1 x	Hand magnifier with LED light 3X
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	Wrench Keys 2.5
1 x	Wrench Keys 2.0
1 x	Inpection mirror 1-978
1 x	6-piece screwdriver set ESD
1 x	Ceramic tweezers 5-081
1 x	Antiallergical Tweezers 5-117-1
1 x	Mini side cutters EUROline-Conductive
1 x	6-piece socket wrenches ESD
1 x	6pcs Double Open End wrench set
1 x	Mini side cutters EUROline-Conductive
1 x	Side cutters 160mm
1 x	TU 2004V
1 x	6-piece screwdriver and cross-recess set
1 x	Antiallergical Tweezers 5-107-1
1 x	6-piece screwdriver and cross-recess set
1 x	Wrench Keys 1.5
1 x	Floor cover ESD
1 x	6-piece wrench key set ESD
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	sanding belts for BBS/s Grit 150
1 x	Socket Wrenches 2.5
1 x	Socket Wrenches 3.5
1 x	Polishing Set
1 x	Socket Wrenches 4.5
1 x	Socket Wrenches 4.0
1 x	Socket Wrenches 5.0
1 x	Socket Wrenches 1.5
1 x	Socket Wrenches 2.0
1 x	Socket Wrenches 5.5
1 x	Socket Wrenches 3.0
1 x	Broca de alta duração de 2.9mm
1 x	sanding belts for BBS/s Grit 80
1 x	Socket Wrenches 3.2
1 x	End side cutters 45º EUROline-Conductive
1 x	Cross-recess Screwdrivers 0
1 x	Earth wire with dummy Schunko-plug
1 x	Cross-recess Screwdrivers 000
1 x	Cross-recess Screwdrivers 2
1 x	DIL42/SDIP42 ZIF 600mil
1 x	Earth wire
1 x	Cross-recess Screwdrivers 00
1 x	Cross-recess Screwdrivers 1
1 x	Cross-recess Screwdrivers 2
1 x	Earthing module
1 x	Cross-recess Screwdrivers 000
1 x	DIL48/SDIP56 ZIF 68HC05Bx
1 x	Cross-recess Screwdrivers 1
1 x	Cross-recess Screwdrivers 1
1 x	Crocodile clip
1 x	Cross-recess Screwdrivers Pozidriv 1
1 x	DIL32/SDIP64 ZIF H8-1
1 x	Cross-recess Screwdrivers 0
1 x	DIL32/SDIP64-1 ZIF Toshiba-BM1136
1 x	Cross-recess Screwdrivers 1
1 x	Cross-recess Screwdrivers Pozidriv 2
1 x	DIL32/SDIP32 ZIF 400mil
1 x	Earth wire
1 x	BGA-0246/0244
1 x	BGA-Bottom-102
1 x	BGA-0246/0243

€9,778.55