€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	VIDEOCLEAN 200ml
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	EUROline-Conductive set of pliers
1 x	Snipe nose pliers 45º EUROline-Conductive
2 x	Mini side cutters EUROline-Conductive
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	Screwdriver 2.5
1 x	Screwdriver 3.0
2 x	Cut off/mitre saw KGS 80
1 x	Screwdriver 3.0
2 x	Table Saw FET
1 x	Safety Insulated Phillips Screwdriver 14-632VDE
2 x	Precision lathe PD 250/E
1 x	Screwdriver 5.5
1 x	Lathe tools 10mm pastilhados
1 x	Safety insulated screwdrivers 14-603 VDE
1 x	2-speed scroll saw DSH
2 x	lathe tools 12mm
1 x	TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x	Safety Insulated Phillips Screwdriver 14-631VDE
2 x	MICRO cutter MIC
4 x	MICROMOT Mains Adapter NG 5/E
1 x	Replacement cutting wire for the THERMOCUT 12/E
2 x	Thicknesser DH 40
1 x	TUNER 200ml
1 x	Safety insulated screwdrivers 14-601 VDE
1 x	Safety insulated screwdrivers 14-602 VDE
1 x	Screwdriver 5.5
2 x	Lathe System PD 400
1 x	ESD Brushe
1 x	Scroll saw DS 230/E
1 x	FLUX-OFF 400ml
1 x	Grinding mop cylinder grit 120
1 x	CD-CLEANER 200ml
1 x	Screwdriver 3.0
3 x	SILICONE 200ml
1 x	Safety insulated screwdrivers 14-606 VDE
1 x	MICRO shaper MP 400
2 x	Surface planer AH 80
1 x	Screwdriver 2.5
1 x	Cross-recess Screwdrivers Pozidriv 1
1 x	Safety insulated screwdrivers 14-604 VDE
1 x	Bench Circular Saw KS 230
1 x	Motor-driven carving device MSG
1 x	Component tweezers 5-013
4 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	EPROM/Flash-PLCC32-2-DIL32 socket submodule
1 x	DIL48/SSOP56 ZIF Flash-1
1 x	DIL48/LQFP64 ZIF M16C/Tiny
1 x	DIL32/QFP64 ZIF H8-1
1 x	DIL48/QFP100 ZIF PLD-1
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	MICRO Heat gun MH 550
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Combination pliers 205mm
1 x	DIL40/PLCC44 ZIF AWM-1
1 x	DIL48/LQFP64 ZIF M38039/M39049
1 x	DIL48/MQFP80 ZIF C500
1 x	Nylon Fleece Brushes
1 x	VASELINE 200ml
1 x	sanding belts for BBS/s Grit 240
1 x	Sanding Drums
1 x	Contact bracelet with spiral cord
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
3 x	Conj 5 pinças ESD
2 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	DIL48/SSOP70 ZIF OKI-1
1 x	DIL34/SSOP34-1 ZIF-CS
1 x	DIL48/MQFP80 ZIF C164
1 x	MICROFLAME burner MFB/E
1 x	DIL48/QFP100 ZIF PLD-3
1 x	Ceramic tweezers 5-082
1 x	DIL28/QFP64 ZIF H8/3644
1 x	DIL32/PLCC32 ZIF-CS
1 x	DIL40/MQFP52 ZIF ADuC812
3 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	DIL40/QFP144 ZIF LPC-1
1 x	DIL40/QFP144 ZIF H8S-1
1 x	DIL32/PLCC32 ZIF
1 x	Engraving tool GG
1 x	DIL32/SDIP64-1 ZIF Toshiba-BM1136
1 x	Router base OFV
3 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	DIL40/PLCC52 ZIF DS87C530
1 x	DIL28/PLCC28 ZIF
1 x	Combi cutter 6.5/2.5mm
1 x	DIL48/SSOP56 ZIF Flash-3
1 x	PROLUB 200ml
1 x	Rounding over cutter 6.4mm
2 x	Coarse-toothed (18 TPI per 25mm)
1 x	MICROMOT glue gun HKP 220
1 x	Corundum sanding discs for LWS
1 x	DIL20/PLCC20 ZIF-CS
1 x	Slot cutter 3.2mm
1 x	Sanding Discs
1 x	MICROFLAM gas soldering set MGS
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	DIL48/SSOP90 ZIF Flash-1
1 x	Component tweezers 5-008
1 x	Flap Wheels
1 x	DIL48/QFP100 ZIF NEC-1
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	DIL32/SDIP64 ZIF H8-1
1 x	V-slot cutter 6.5mm
1 x	DIL28/PLCC32 ZIF EPROM
1 x	DIL40/PLCC68 ZIF DS87C550
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	DIL32/SDIP32 ZIF 400mil
1 x	DIL40/PLCC52 ZIF MCS51-2
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	DIL40/QFP64-1 ZIF-CS NEC-1
1 x	DIL40/SDIP52 ZIF 55x
1 x	Complete Engraving Kit with trial glass
1 x	DIL40/QFP64-2 ZIF-CS NEC-1
3 x	MULTI 200ml
1 x	TOP-PIN 200ml
1 x	DIL44/SSOP44 ZIF 240mil
1 x	DIL32/PLCC84 ZIF HS3334ESCF1H
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Sanding Discs
1 x	DIL40/PLCC52 ZIF AWM-1
1 x	DIL8/SSOP8 ZIF 120mil
1 x	DIL32/PLCC32 ZIF-CS NOR-1
1 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x	Sanding Drums
1 x	machine base with shelves for D250X550
1 x	DIL40/QFP64-4 ZIF NEC-1
1 x	DIL48/QFP100 ZIF MSP430-1
1 x	DIL42/SDIP42 ZIF 600mil
1 x	DIL48/QFP100 ZIF PLD-2
1 x	DIL40/PLCC44 ZIF W-EPROM / MCS51
1 x	DIL48/SSOP56 ZIF Flash-2
1 x	DIL34/SSOP34 ZIF 200 mil
1 x	DIL40/QFP64 ZIF LPC-1
1 x	Sanding bands 14x13mm
1 x	Combination pliers 185mm
1 x	Rebating cutter 6.4mm
1 x	Milling cutter set (2 - 5mm)
1 x	Brass contact cleaner brush
1 x	DIL20W/PLCC20 ZIF
1 x	MICROMOT Mains Adapter NG 2/E
1 x	DIL28/PLCC28 ZIF-CS
1 x	Slot cutter 5.0mm
1 x	DIL40/PLCC44 ZIF PIC-1
1 x	Milling cutter set (6 - 10mm)
1 x	DIL48/SDIP56 ZIF 68HC05Bx
1 x	Combination pliers 210mm
1 x	Core box bit 3.2mm
1 x	DIL40/PLCC28 ZIF AWM-1
1 x	DIL48/SSOP48 ZIF 300mil
2 x	Ceramic-tipped tweezers and ESD 5-095
1 x	PROTECTION 200ml
1 x	DIL48/QFP100 ZIF MB90F-1
1 x	MICRO-screwdrivers
1 x	DIL40/QFP64-3 ZIF NEC-1
1 x	Combination pliers 160mm
1 x	Component tweezers 5-007
1 x	Bottom PSOP44 NOR-2
1 x	DIL40/PLCC68 ZIF AWM-1
1 x	Flap Wheels
2 x	Blade holders for DS 460
1 x	Edge cutter with pin 6.4mm
1 x	Sanding Drums
1 x	Sanding Drums
1 x	DIL28/QFP52 ZIF-CS SX52
1 x	Angle cutter 45 °
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Combination pliers 170mm
1 x	Combination pliers 190mm
1 x	SPRAYFLON 200ml
1 x	Half round cutter 13mm
1 x	DIL40/QFP100 ZIF AVR-1
1 x	Slot cutter 6.5mm
1 x	Flexible polishing pad set
1 x	BeeProg2
1 x	Cotton polishers
1 x	Fibre-Cut Discs
1 x	Diamond Cutting Discs
1 x	Socket Wrenches 3.2
1 x	Socket Wrenches 1.5
1 x	Side cutters 160mm
1 x	Socket Wrenches 2.0
2 x	Lathe tools 8mm pastilhados
1 x	Socket Wrenches 5.5
1 x	BGA-Bottom-10
1 x	lathe tools 10mm
1 x	Diamond Cutting Discs
2 x	ESD Tweezers 5-195
1 x	Felt polishers
1 x	Side cutters 170mm
1 x	EUROline side cutter pointed head
1 x	BGA-Bottom-106
1 x	EUROline mini side cutter
1 x	ESD Tweezers 5-194
1 x	Fibre-Cut Discs
1 x	Wrench Keys 0.9
1 x	MICRO woodturning lathe DB 250
1 x	Socket Wrenches 4.0
1 x	Polishing Set
1 x	Socket Wrenches 2.5
1 x	ESD Tweezers 5-193
1 x	BGA-Bottom-102
2 x	6-piece set of ESD/EGB tweezers
1 x	BGA-0245/0241
1 x	BGA-0245/0243
1 x	Super jig saw STS/E
1 x	ESD Tweezers 5-192
1 x	Ceramic-tipped tweezers and ESD 5-096
1 x	MICRO Band Saw MBS 240/E
1 x	End side cutters 45º EUROline-Conductive
1 x	Metal Cutting Blades
1 x	Socket Wrenches 4.5
1 x	lathe tools 8mm
1 x	Flexible silicon discs
1 x	BGA-Bottom-105
1 x	BGA-Bottom-1
1 x	Socket Wrenches 3.5

€27,268.29