€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	EUROline side cutter pointed head
2 x	VIDEOCLEAN 200ml
2 x	DUSTER-BR 200ml
2 x	FREEZER-TOP 200ml
1 x	ANTISTATIC 200ml
2 x	Conjunto de três brocas de ponto
1 x	Super safety and specialty bit set, 75-piece
1 x	Set of precision cutters
2 x	Flame shaped milling cutters
1 x	Ball shaped milling cutters
1 x	Tungsten carbide cutter 3.0mm
1 x	PROTECTION 200ml
2 x	Corundum grinding disc for LWS
1 x	Footswitch FS
3 x	Polishing Set
2 x	Diamond Cutting Discs
1 x	SPRAYFLON 200ml
2 x	Corundum sanding discs for LWS
1 x	SPRAYOIL 200ml
1 x	Hot wire cutter THERMOCUT 650
1 x	SILICONE 200ml
1 x	Corundum grinding disc for LWS
1 x	Tungsten carbide cutter 1.0mm
2 x	SCREEN 200ml
1 x	Tungsten tipped saw blade
1 x	Cylinder shaped milling cutters
2 x	VASELINE 200ml
1 x	Tungsten carbide cutter 2.0mm
2 x	MULTI 200ml
1 x	Set of special steel cutters
1 x	Diamond Grinding Bits 1mm
2 x	Corundum sanding discs for LWS
3 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Delta sander OZI/E
1 x	Table Saw FET
1 x	Fine dust paper filter for CW-matic
1 x	Drill chuck with sliding sleeve for the tailstock
2 x	Felt polishers
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
2 x	Fibre-Cut Discs
1 x	Fibre-Cut Discs
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Dividing attachment TA 230 for PF 250
2 x	Cut off/mitre saw KGS 80
2 x	Felt polishers
2 x	MICRO cutter MIC
2 x	Fibre-Cut Discs
2 x	Felt polishers
1 x	Bench Circular Saw KS 230
1 x	Engraving tool GG
1 x	Five piece HSS chisel set
1 x	sanding belts for BBS/s Grit 150
2 x	Fibre-Cut Discs
1 x	sanding belts for BBS/s Grit 240
1 x	Belt sander BS/E
2 x	Fibre-Cut Discs
1 x	Surface planer AH 80
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Thicknesser DH 40
2 x	Felt polishers
1 x	Disc Sander TG 125/E
1 x	Jig saw STS 12/E
3 x	Blade for Wood and Plastics
2 x	Blade for Steel and brass
3 x	Blade guides separately
3 x	Band knife of hardened spring band steel (without teeth)
2 x	DEGRESER 200ml
1 x	Chuck for TBM 220
2 x	Tungsten Carbide Tipped (TCT)
1 x	Cylinder sander WAS/E
3 x	Bandsaw blade of bimetal for MBS 240/E
2 x	FLUX-OFF 400ml
2 x	Super-Cut
2 x	Diamond Coated
1 x	Sanding fleece for LWS
1 x	HSS cutting blade for OZI
1 x	HSS immersion saw blades for OZI
1 x	Tungstein carbide rasp - and cutting disc
3 x	Super-fine sanding discs grain 000
1 x	Sanding pads for OZI 220/E grit 240
1 x	Sanding fleece for LWS
1 x	Sanding pads for OZI 220/E grit 150
1 x	Diamond cutting blade for OZI
1 x	Diamond-coated cutting and roughing disc
1 x	HSS immersion saw blades for OZI
1 x	Digital caliper gauge 300 mm
1 x	Cutting tool 10 mm
1 x	4-jaw chuck individually clamping 80mm
1 x	Cutting tool 16 mm
1 x	6-piece screwdriver and cross-recess set
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Milling cutter set (2 - 5mm)
1 x	6-piece screwdriver set ESD
1 x	Cutter head for copy and surface milling MT2
1 x	3-jaw chuck centrically clamping 100mm
2 x	Precision Vice FMS 75
1 x	Cutting tool 8 mm
2 x	Tool holder for rotary tools
1 x	3-jaw chuck centrically clamping 160mm
1 x	BIT-SET
1 x	centrically clamping 100mm
2 x	HSS boring tool set, 6 pieces
1 x	CM2 - B16 - M10
1 x	6-piece socket wrenches ESD
1 x	4-jaw chuck individually clamping 125mm
1 x	Cutting tools of high quality cobalt HSS steel, ground
3 x	Gear Chuck
1 x	Dial gauge
1 x	3-jaw chuck centrically clamping 80mm
1 x	Three piece thread cutting set
1 x	3-jaw chuck centrically clamping 125mm
1 x	centrically clamping 125mm
1 x	End milling cutter kit HSS 12 pcs
1 x	Cutter head for copy and surface milling MT3
3 x	Centre Turning Attachment
1 x	DCMT070204
1 x	Milling cutter set (6 - 10mm)
2 x	Machine Vice MS 4
1 x	4-jaw chuck individually clamping 100mm
2 x	Multipurpose Vices Primus 75
1 x	Cutting tool HM 20 mm
1 x	6-piece screwdriver and cross-recess set
1 x	DIL48/MQFP80 ZIF C164
3 x	Super-fine sanding discs grain 400
1 x	ESD Tweezers 5-191
2 x	EUROline end cutter
1 x	End side cutters EUROline-Conductive
1 x	Precision caliper 500mm
1 x	ESD Tweezers 5-193
2 x	Replacement belts for BSL 220/E
1 x	EUROline set of pliers
1 x	DIL48/PQFP80 ZIF M58BW-1
1 x	ESD Brushe
1 x	EUROline mini side cutter
3 x	Replacement belts for BSL 220/E
1 x	Boring Bar for CCMT 16mm
3 x	Professional set for finish grinding and polishing
1 x	Fibre-Cut Discs
1 x	ESD Tweezers 5-192
1 x	Metal Cutting Blades
1 x	DIL24/QSOP24 ZIF 150mil
1 x	SCLCR1010E06
1 x	ESD Brushe
2 x	Four Jaw Chuck
1 x	DIL48/MQFP80 ZIF C500
1 x	ESD-handling set
1 x	ESD Tweezers 5-194
1 x	Diamond Cutting Discs
1 x	sclcr2525M12
2 x	Replacement belts for BSL 220/E
1 x	Diamond Cutting Discs
1 x	Beeprog2C
1 x	DIL48/PQFP144 ZIF ST10-1
1 x	DIL48/PQFP100 ZIF ST10-1
2 x	Diamond-coated cutting disc for MIC
1 x	ESD-handling ser 9-361
2 x	EUROline round nose pliers
2 x	Replacement belts for BSL 220/E
1 x	MICROMOT Mains Adapter NG 2/S
1 x	EUROline mini side cutter
1 x	DIL48/PQFP100 ZIF PLD-1
1 x	EUROline mini side cutter
1 x	DIL48/PQFP100 ZIF ST92Fxxx
1 x	SmartProg2
1 x	Diamond Cutting Discs
1 x	Boring Bar for CCMT 8mm
3 x	Super-fine sanding discs grain 2000
1 x	DIL48/LQFP64 ZIF M16C/Tiny
1 x	Boring Bar for CCMT
1 x	Lambswool polishing disc
1 x	DIL40/MQFP52 ZIF ADuC812
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	Parting tool 10mm
2 x	EUROline flat nose pliers
1 x	EUROline mini side cutter
1 x	ESD Tweezers 5-195
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-5
1 x	BGA-Bottom-111
1 x	Safety Insulated Phillips Screwdriver 14-634VDE
1 x	Safety Insulated Phillips Screwdriver 14-631VDE
1 x	Mini side cutters EUROline-Conductive
1 x	DIL48/SDIP56 ZIF 68HC05Bx
1 x	Round nose pliers 165mm
2 x	BGA-0245/0241
1 x	High quality corundum grinding bits
2 x	BGA-Bottom-102
1 x	BGA-Bottom-125
1 x	High quality corundum grinding bits
1 x	HSS drill bits 1.6mm
1 x	Bottom PSOP44 NOR-2
1 x	BGA-Bottom-101
1 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x	Safety Insulated Phillips Screwdriver 14-632VDE
1 x	PLCC Puller
1 x	DIL32/SDIP64-1 ZIF Toshiba-BM1136
1 x	DIL28/TSOP28 ZIF 11,8mm Flash
1 x	Polishing paste
2 x	BGA-Bottom-115
1 x	BGA-Bottom-108
1 x	Tungsten carbide drills Ø2mm
1 x	BGA-Bottom-126
1 x	DIL32/TSOP32 ZIF 12.4mm Flash
2 x	BGA-Bottom-103
1 x	Safety Insulated Phillips Screwdriver 14-633VDE
1 x	HSS drill bits 0.8mm
1 x	Bottom PSOP44 NOR-1
1 x	Cotton polishers
1 x	High quality corundum grinding bits
1 x	PVC-insulated tweezers 5-117-6
1 x	BGA-Bottom-105
1 x	Flexible silicon discs
1 x	DIL48/TSOP48 ZIF 18.4mm
1 x	HSS twist drill set with centring pin
1 x	High quality corundum grinding bits
1 x	Tungsten carbide drills Ø1mm
1 x	Flexible polishing pad set
1 x	Safety Insulated Pozidriv Screwdriver 14-641VDE
1 x	DIL40/TSOP40 ZIF 18.4mm
1 x	Plastic magnifying glass
1 x	Cotton polishers
1 x	Bottom PSOP44 NOR-3
1 x	Flexible polishing pad set
1 x	Grinding mop cylinder grit 240
1 x	Round nose pliers 185mm
2 x	BGA-Bottom-1
1 x	Cotton polishers
1 x	BGA-Bottom-10
1 x	DIL32/TSOP32 ZIF 11.8mm
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-2
1 x	Top PSOP44 ZIF 600mil
1 x	HSS drill bits 1.2mm
1 x	DIL44/PSOP44 ZIF 600 mil
1 x	Belt sander BBS/S
1 x	BGA-Bottom-118
1 x	High quality corundum grinding bits
1 x	Grinding mop cylinder grit 120
1 x	Flexible silicon discs
1 x	DIL42/SDIP42 ZIF 600mil
1 x	High quality corundum grinding bits
1 x	BGA-0245/0242
2 x	BGA-0245/0243
1 x	HSS twist drill set to DIN 338
1 x	DIL32/SDIP32 ZIF 400mil
1 x	DIL44/TSOP44-II ZIF 400mil
1 x	High quality corundum grinding bits
1 x	PRECISION WIRE STRIPPER ESD-PLUS
1 x	DIL28/TSOP28 ZIF 11.8 mm
1 x	Multipurpose Vices Primus100
1 x	DIL32/SDIP64 ZIF H8-1
1 x	DIL8/SOT23-6 ZIF-CS PIC
1 x	DIL32/TSOP32 ZIF 18.4mm Flash
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-6
1 x	PVC-insulated tweezers 5-121-6
1 x	PLCC Extractor
1 x	High quality corundum grinding bits
2 x	Steel tape measure
1 x	DIL48/TSOP48 ZIF 15.4mm
1 x	Round nose pliers 45º EUROline-Conductive
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-3
1 x	Tungsten carbide drills Ø1,5mm
1 x	DIL40/SDIP52 ZIF 55x
1 x	PVC-insulated tweezers 5-107-6
1 x	Flexible silicon discs
1 x	HSS drill bits 1.0mm
2 x	BGA-Bottom-106
1 x	BGA-Bottom-127
1 x	DIL48/QFP100 ZIF NEC-2
2 x	Professional polishing sponge
1 x	Stainless steel cups
1 x	Telephon pliers straight 160mm
1 x	Telephone pliers stright 205mm
1 x	Flat nose pliers 185mm
1 x	Flat nose pliers 165mm
1 x	Steel cups
1 x	DIL40/QFP100 ZIF AVR-1
1 x	DIL48/QFP100 ZIF MB90F-1
1 x	Crimping plier for BNC
1 x	Fixed Steady
2 x	BeeHive208S
1 x	DIL40/QFP64 ZIF LPC-1
1 x	DIL40/QFP64-1 ZIF-CS NEC-1
1 x	Cups brushes
1 x	DIL48/QFP100 ZIF NEC-1
1 x	DIL40/QFP64-2 ZIF-CS NEC-1
1 x	Telephone pliers bent 205mm
1 x	Telephone pliers stright 165mm
1 x	Telephon pliers straight 200mm
1 x	DIL40/QFP80 ZIF M37702
1 x	Steel wheels
1 x	Steel brushes
1 x	DIL48/QFP100 ZIF MSP430-1
1 x	Flat nose pliers 160mm
2 x	Backing disc for LWS
1 x	DIL48/QFP100 ZIF PLD-2
2 x	BeeHive204
1 x	Telephone pliers straight 205mm
2 x	Slot cutter 3.2mm
2 x	EUROline snipe nose pliers
1 x	DIL40/QFP64-4 ZIF NEC-1
1 x	DIL28/QFP52 ZIF-CS SX52
1 x	DIL48/QFP100 ZIF PLD-3
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Stainless steel brushes
1 x	EUROline side cutter rounded head
1 x	Telephon pliers bent 160mm
1 x	DIL48/QFP100 ZIF PLD-4
1 x	DIL40/QFP144 ZIF H8S-1
1 x	Telephon pliers bent 200mm
2 x	EUROline top cutter
1 x	Diamond blade for MBS 240/E
1 x	Telephone pliers bent 205mm
1 x	DIL40/QFP144 ZIF LPC-1
1 x	DIL40/QFP64-3 ZIF NEC-1
2 x	Polishing felt, medium hard
1 x	IC tweezers
1 x	DIL24/TSSOP24 ZIF 170mil
1 x	EPROM/Flash-PLCC32-2-DIL32 socket submodule
1 x	DIL40/TQFP64 ZIF EM652X
1 x	DIL44/TQFP44-3 ZIF
1 x	DIL48/SSOP56 ZIF Flash-2
1 x	Side cutters 170mm
1 x	DIL40/SOIC20 ZIF MB95-1
1 x	Mini side cutters EUROline-Conductive
1 x	BGA-Bottom-11
1 x	End side cutters 45º EUROline-Conductive
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	DIL14W/SOIC14 ZIF 150mil
1 x	Side cutters 180mm
1 x	BGA-0246/0243
1 x	BGA-0246/0244
1 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	Core box bit 3.2mm
1 x	DIL40/TQFP44 ZIF PIC-1
1 x	DIL48/SSOP70 ZIF OKI-1
1 x	Rebating cutter 6.4mm
1 x	DIL40/TQFP64 ZIF AVRmega-2
1 x	Lathe System PD 400
1 x	Mini side cutters EUROline-Conductive
1 x	DIL48/TQFP100 ZIF ST92Fxxx
1 x	Handy 1515
1 x	Side cutters EUROline-Conductive
1 x	DIL48/TQFP64 ZIF HC908-1
1 x	DIL28W/SOIC28 ZIF 300mil
1 x	DIL40/SOIC20 ZIF AWM-1
1 x	DIL40/TQFP64 ZIF PIC-1A
1 x	DIL48/SSOP56 ZIF Flash-1
1 x	DIL48/SSOP90 ZIF Flash-1
1 x	DIL3/SOT23-3 ZIF-CS
1 x	Hand Magnifier 2-293
1 x	Edge cutter with pin 6.4mm
1 x	DIL40/TQFP52 ZIF EM652X
1 x	DIL44/SSOP44 ZIF 240mil
1 x	Hand magnifier with LED light 3X
1 x	Slot cutter 6.5mm
1 x	DIL40/TQFP80-1 ZIF AWM-1
1 x	DIL40/TQFP80-1 ZIF PIC-1A

€54,707.98