Top » Catalog » Elnec » 60-0052

€999.00 + VAT

BeeProg2
[60-0052]

Very fast universal USB/LPT interfaced programmer.

If you're looking for lower price universal programmer, please take a look at BeeProg2C programmer.

Short description:

supported devices from manufactures
extremely fast programming, one of the fastest programmers in this category. Sustainable programming speed greater than 5 MBytes per second. Programs 2 GB eMMC NAND Flash in less than 365 sec.
48-pins powerful pindrivers, no adapter required for any DIL devices
ISP connector for in-circuit programming
connection to PC: USB 2.0 (up to 480 Mbit/s, high speed/full speed) and 1.1 compatible interface
after upgrade to BeeProg2, also high-speed IEEE 1284 (ECP/EPP) printer-port (LPT) interface is available
comfortable and easy to use control program, works with all versions of MS Windows from Windows XP to Windows 10 (32-bit and 64-bit*)
unique quick reaction to customer's needs - software update can be ready within a day from request by OnDemand software
Multiprogramming possible by attaching more programmers to one PC
made in Slovakia
warranty - 3 years

More Information here: http://www.elnec.com/products/universal-programmers/beeprog2/

Reviews

Shopping Cart

1 x	4-jaw chuck individually clamping 100mm
1 x	3-jaw chuck centrically clamping 125mm
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	3-jaw chuck centrically clamping 160mm
1 x	3-jaw chuck centrically clamping 100mm
1 x	Broca de ponto 8.00 x 3.15
1 x	3-jaw chuck centrically clamping 80mm
1 x	4-jaw chuck individually clamping 125mm
1 x	4-jaw chuck individually clamping 80mm
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Spiral blade. 125mm long with plain ends (without pins).
2 x	Coarse-toothed (10 TPI per 25mm)
1 x	Micro Compound Table KT 70
1 x	Morse taper MT2 - B16
2 x	Special Fused Alumina (Hardness N).
2 x	Polishing Set
1 x	centrically clamping 100mm
2 x	Coarse-toothed (18 TPI per 25mm)
1 x	Morse taper MT3 - B16
1 x	Blade holders for DS 460
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	CM2 - B16 - M10
2 x	Silicon-Carbide.
1 x	MICROMOT Mains Adapter NG 5/E
1 x	centrically clamping 125mm
1 x	Cutting disc, with reinforcement
1 x	Hot wire cutter THERMOCUT 650
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	magnetic base 80kg
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Super safety and specialty bit set, 75-piece
1 x	Precision quick-action drill chuck 0-8mm B16
1 x	Precision quick-action drill chuck 0-13mm B16
1 x	ESD-handling ser 9-361
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Screwdriver bit set. 49-piece.
1 x	Dial gauge
1 x	Precision quick-action drill chuck 0-16mm B16
1 x	Universal and oil siphoning pump AP 12
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	BGA-Bottom-222
1 x	BGA-Bottom-9
1 x	BGA-Top-5 ZIF-CS
1 x	BGA-Top-132 ZIF-CS
1 x	BGA-Bottom-218
1 x	DCGT 070202F-AL
1 x	BGA-Bottom-231
1 x	BGA-Bottom-225
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	BGA-Bottom-223
1 x	BGA-Bottom-224
1 x	BGA-Top-4 ZIF-CS
1 x	Insert CCGT120404-AK
1 x	Bottom PSOP44 NOR-2
1 x	BGA-Bottom-22
1 x	BGA-Bottom-88
1 x	Insert CCGT060202-AK
1 x	BGA-Bottom-229
1 x	BGA-Bottom-8
1 x	BGA-Bottom-5
1 x	BGA-Bottom-221
1 x	Bottom PSOP44 NOR-3
1 x	Bottom PSOP44 NOR-1
1 x	BGA-Top-3 ZIF-CS
1 x	BGA-Bottom-10
1 x	BGA-0245/0241
1 x	BeeHive204
2 x	Boring Bar for DCMT 10mm
1 x	BGA-0245/0243
1 x	BGA-Bottom-101

€9,432.01