€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

2 x	Diamond Cutting Discs
1 x	DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x	Fixed Steady
1 x	Diamond Grinding Bits 1,8mm
4 x	Backing disc for LWS
1 x	DIL48/TSOP48 ZIF 15.4mm
2 x	Diamond Cutting Discs
1 x	Diamond Grinding Bits 5mm
1 x	DIL32/TSOP32 ZIF 11.8mm
1 x	Ball-shaped diamond coated 3.2mm
2 x	Microfibre cloth
1 x	DIL48/TSOP48 ZIF 18.4mm
3 x	Super-fine sanding discs grain 2000
2 x	Diamond Cutting Discs
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-1
1 x	DIL40/TSOP40 ZIF 18.4mm
1 x	Centre Turning Attachment
1 x	DIL32/TSOP32 ZIF 18.4mm Flash
2 x	Diamond Cutting Discs
1 x	DIL44/TSOP44-II ZIF 400mil
1 x	DIL40/TSOP40 ZIF-CS 12.4mm
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-5
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-2
1 x	Diamond Grinding Bits 1mm
3 x	Lambswool polishing disc
1 x	Ball-shaped diamond coated 2.2mm
1 x	DIL32/TSOP32 ZIF 18.4mm Flash
1 x	DIL28/TSOP28 ZIF 11,8mm Flash
2 x	Collet Set for accurate use on round components
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-6
1 x	DIL28/TSOP28 ZIF 11.8 mm
4 x	Professional set for finish grinding and polishing
1 x	Ball-shaped diamond coated 1.2mm
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-3
1 x	Diamond Grinding Bits 1,8mm
2 x	Diamond Twist Drills
1 x	DIL32/TSOP32 ZIF 12.4mm Flash
1 x	DIL40/TSOP40 ZIF 18.4mm Flash-1
3 x	MICROMOT tool holder
1 x	Sanding pads for OZI 220/E grit 240
1 x	Corundum grinding disc for LWS
1 x	DIL40/SOIC16 ZIF MB-1
1 x	DIL40/TQFP64 ZIF EM652X
1 x	HSS drill bits 0.5mm
1 x	Sanding Discs
3 x	Precision steel vice PM 40
1 x	DIL40/TQFP64 ZIF AVRmega-2
1 x	Tungsten carbide drills Ø2mm
1 x	DIL44/TQFP44-3 ZIF
1 x	DIL48/LQFP64 ZIF M38039/M39049
1 x	DIL48/TQFP64 ZIF HC908-1
1 x	DIL40/TQFP64 ZIF PIC-1A
1 x	Polishing Set
1 x	Cross-recess Screwdrivers 1
3 x	Machine Vice MS 4
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Cross-recess Screwdrivers 000
1 x	DIL48/TQFP100-2 ZIF PLD-1
1 x	Mini side cutters EUROline-Conductive
1 x	DIL40/TQFP52 ZIF EM652X
1 x	Sanding pads for OZI 220/E grit 150
1 x	Corundum grinding disc for LWS
1 x	DIL48/PLCC52 ZIF-CS 68HC11
1 x	Bench drill press TBH
1 x	DIL14W/SOIC14 ZIF 150mil
2 x	Step clamps made of steel
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	HSS cutting blade for OZI
1 x	HSS drill bits 1.6mm
1 x	Corundum sanding discs for LWS
1 x	End side cutters EUROline-Conductive
2 x	Mill/Drill Unit BFB 2000.
1 x	DIL40/TQFP44 ZIF AWM-1
1 x	HSS drill bits 1.0mm
1 x	DIL48/TQFP100 ZIF PLD-2
1 x	Mini side cutters EUROline-Conductive
1 x	Three jaw chuck for the lathe DB 250
1 x	High quality corundum grinding bits
1 x	Diamond-coated cutting and roughing disc
1 x	Tungsten carbide drills Ø1,5mm
2 x	Micro Compound Table KT 70
1 x	Screwdriver 1.5
1 x	Screwdriver 0.8
1 x	DIL28/QFN28-2 ZIF-CS
1 x	Sanding bands 14x13mm
1 x	DIL18W/SOIC18 ZIF 300mil
2 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	DIL3/SOT23-3 ZIF-CS
1 x	Cross-recess Screwdrivers 1
1 x	Flexible silicon discs
1 x	DIL44/QFN44-2 ZIF-CS
1 x	Sanding pads for OZI 220/E grit 80
1 x	Sanding fleece for LWS
1 x	DIL16/SOIC16 ZIF 200 mil
1 x	Flap Wheels
2 x	Tungsten carbide cutters set
1 x	Screwdriver 2.0
1 x	DIL20/SOIC20 ZIF 300 mil
2 x	Protective device for hand-operated MICROMOT
1 x	HSS drill bits 1.2mm
1 x	DIL28/SOIC28 ZIF 330 mil
1 x	Corundum fan sander for LWS
1 x	Sanding fleece for LWS
1 x	DIL20/SOIC20 ZIF 200mil
1 x	Screwdriver 1.8
1 x	Hot wire cutter THERMOCUT 12/E
4 x	14-piece parallel supports set
2 x	End side cutters 45º EUROline-Conductive
1 x	Corundum sanding discs for LWS
1 x	Conjunto de três brocas de ponto
1 x	DIL48/LQFP64 ZIF M16C/Tiny
1 x	Nylon Fleece Brushes
1 x	DIL40/SOIC28 ZIF AWM-1
1 x	DIL48/TQFP144 ZIF ST10-1
1 x	DIL44/SOIC44 ZIF-CS
1 x	Sanding Drums
1 x	Three piece thread cutting set
1 x	Five piece HSS chisel set
1 x	DIL48/QFN48 ZIF-CS
1 x	Screwdriver 1.2
2 x	Super-Cut
2 x	Aluminium Die-Cast
1 x	DIL40/TQFP44-1 ZIF MCS51
1 x	DIL8/QFN8-1 ZIF-CS
1 x	Diamond Coated
2 x	MICROMOT drill stand MB 200
1 x	DIL40/TQFP64 ZIF CC-1
1 x	DIL16/SOIC16-1 ZIF 170mil
1 x	Independent four jaw chuck for the DB 250
1 x	High quality corundum grinding bits
2 x	MICROMOT extension cord. 300cm.
1 x	DIL40/TQFP44 ZIF PIC-1
1 x	Super safety and specialty bit set, 75-piece
3 x	Footswitch FS
1 x	DIL40/VQFP64 ZIF AWM-1
1 x	DIL44/TQFP44-2 ZIF
1 x	DIL48/TQFP48-1 ZIF
1 x	Mini side cutters EUROline-Conductive
1 x	DIL24W/SOIC24 ZIF 300mil
1 x	Hot wire cutter THERMOCUT 650
1 x	Cutting disc, with reinforcement
2 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	DIL40/SOIC20 ZIF AWM-1
1 x	Super-fine sanding discs grain 000
1 x	DIL20W/SOIC20 ZIF 300mil
1 x	DIL16W/SOIC16 ZIF 150mil
2 x	Side cutters EUROline-Conductive
1 x	Screwdriver bit set. 49-piece.
1 x	DIL40/TQFP80-1 ZIF AWM-1
1 x	DIL32/SOIC32 ZIF 445mil
1 x	DIL40/SOIC20 ZIF MB95-1
1 x	DIL32/SOIC32 ZIF 300 mil
1 x	Tungsten carbide drills Ø1mm
1 x	DIL28W/SOIC28 ZIF 300mil
1 x	HSS drill bits 0.8mm
1 x	DIL40/TQFP80-1 ZIF PIC-1A
2 x	Diamond cutting blade for OZI
1 x	Cross-recess Screwdrivers 00
1 x	Cross-recess Screwdrivers 2
1 x	DIL16W/SOIC16 ZIF 300mil
1 x	DIL48/TQFP100 ZIF ST92Fxxx
1 x	Diamond-coated cutting disc for MIC
1 x	Corundum bound cutting disc for LWS
1 x	Metal Cutting Blades
1 x	Cross-recess Screwdrivers 2
1 x	Professional polishing sponge
1 x	Corundum fan sander for LWS
1 x	Flexible silicon discs
1 x	DIL40/TQFP44 ZIF EM652X
1 x	HSS immersion saw blades for OZI
1 x	DIL44/TQFP44-1 Zif
1 x	Flexible silicon discs
1 x	DIL48/PQFP80 ZIF M58BW-1
1 x	DIL24/QSOP24 ZIF 150mil
1 x	BGA-Bottom-115
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Blade for Wood and Plastics
1 x	Stainless steel brushes
1 x	BGA-0246/0244
2 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Tool holder for rotary tools
1 x	3-jaw chuck centrically clamping 80mm
1 x	Wolfram vanadium steel milling bits
1 x	Cylindrical cutters
1 x	Steel cups
1 x	Precision quick-action drill chuck 0-13mm B16
1 x	BeeHive204
1 x	Morse taper MT3 - B16
1 x	DIL48/PQFP100 ZIF PLD-1
1 x	DIL48/MQFP80 ZIF C500
1 x	Universal holder UHZ
1 x	MICROFLAME burner MFB/E
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	DIL32/SDIP64-1 ZIF Toshiba-BM1136
1 x	Tungsten carbide cutter 1.0mm
1 x	Grinding mop cylinder grit 240
1 x	Stainless steel cups
1 x	DIL44/PSOP44 ZIF 600 mil
1 x	Blade for Steel and brass
1 x	Steel brushes
1 x	BGA-Bottom-105
1 x	Flame shaped milling cutters
1 x	DIL48/PQFP100 ZIF ST10-1
1 x	BGA-0245/0242
1 x	centrically clamping 100mm
1 x	Tungsten carbide cutter 3.0mm
1 x	3-jaw chuck centrically clamping 160mm
1 x	Stainless steel wheels
1 x	DIL32/SDIP32 ZIF 400mil
1 x	Steel wheels
1 x	Engraving tool GG
1 x	DIL48/PQFP144 ZIF ST10-1
1 x
1 x	MICRO Heat gun MH 550
1 x	Flexishaft MICROMOT 110/BF
1 x	Universal polishing paste
1 x	BGA-Bottom-106
1 x	DIL48/MQFP80 ZIF C164
1 x	BGA-Bottom-102
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Top PSOP44 ZIF 600mil

€23,928.10