€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

3 x	Self-adhesive silicone film for easy sanding disc replacement
3 x	Self-adhesive white corundum sanding discs for TG 250/E
2 x	BIT-SET
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
3 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Dial gauge
1 x	4-jaw chuck individually clamping 100mm
1 x	4-jaw chuck individually clamping 125mm
1 x	3-jaw chuck centrically clamping 80mm
1 x	centrically clamping 100mm
1 x	Precision quick-action drill chuck 0-10mm B16
3 x	Replacement belts for BSL 220/E
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	Precision quick-action drill chuck 0-8mm B16
1 x	OPTI BF16 Vario
1 x	3-jaw chuck centrically clamping 160mm
1 x	Polishing felt, medium hard
1 x	3-jaw chuck centrically clamping 100mm
1 x	3-jaw chuck centrically clamping 125mm
2 x	Morse taper MT3 - B16
1 x	centrically clamping 125mm
1 x	Precision magnetic gauge stand
1 x	Precision quick-action drill chuck 0-13mm B16
1 x	4-jaw chuck individually clamping 80mm
2 x	Morse taper MT2 - B16
1 x	Precision quick-action drill chuck 0-16mm B16
2 x	CM2 - B16 - M10
3 x	Replacement belts for BSL 220/E
1 x	Brass contact cleaner brush
1 x	6-piece screwdriver set ESD
1 x	6-piece TORX-screwdriver-set ESD
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	6-piece wrench key set ESD
2 x	Replacement belts for BSL 220/E
1 x	6-piece set of ESD/EGB tweezers
1 x	6-piece socket wrenches ESD
2 x	Replacement belts for BSL 220/E
1 x	ACCENT SERVICE TOOLS SET
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	6-piece screwdriver and cross-recess set ESD
2 x	Polishing Set
4 x	Gear Chuck
1 x	Parting tool 10mm
1 x	SCLCR1010E06
1 x	Boring Bar for CCMT
3 x	Centre Turning Attachment
1 x	Boring Bar for CCMT 8mm
1 x	Boring Bar for DCMT 10mm
1 x	Boring Bar for CCMT 16mm
1 x	sandpaper for PS 13 Grot 180
2 x	Special Fused Alumina (Hardness N).
1 x	sclcr2525M12
2 x	Silicon-Carbide.
1 x	Revolving center with replacement lathe centers
1 x	Grinding mop cylinder grit 80
1 x	quantum revolving center CM1
1 x	sanding belts for BBS/s Grit 80
1 x	sanding belts for BBS/s Grit 240
1 x	quantum revolving center CM2
1 x	Cutting tool 10 mm
1 x	lathe tools 12mm
1 x	Cutting tool 8 mm
1 x	Cutting tool HM 20 mm
2 x	lathe tools 10mm
1 x	Lathe tools 10mm pastilhados
1 x	Lathe tools 8mm pastilhados
1 x	Tool holder for rotary tools
1 x	lathe tools 8mm
3 x	TU 2404
1 x	Cutting tool 16 mm
1 x	Fixed Steady
1 x	Diamond Cutting Discs
1 x	High quality corundum grinding bits
1 x	Disc Sander TG 250/E
1 x	Diamond Coated
1 x	High quality corundum grinding bits
1 x	HSS drill bits 0.8mm
1 x	HSS cutting blade for OZI
1 x	High quality corundum grinding bits
2 x	Precision lathe PD 250/E
1 x	Diamond Grinding Bits 5mm
1 x	Diamond Cutting Discs
1 x	Disc Sander TG 125/E
1 x	HSS twist drill set to DIN 338
1 x	HSS boring tool set, 6 pieces
1 x	HSS drill bits 1.6mm
3 x	Lathe System PD 400
2 x	TU 1503V
1 x	Diamond-coated cutting disc for MIC
1 x	HSS drill bits 0.5mm
1 x	Diamond blade for MBS 240/E
1 x	Hot wire cutter THERMOCUT 12/E
1 x	Diamond Cutting Discs
1 x	HSS drill bits 1.2mm
1 x	High quality corundum grinding bits
1 x	Diamond-coated cutting and roughing disc
1 x	Disc cutters
1 x	Hot wire cutter THERMOCUT 650
2 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	HSS drill bits 1.0mm
1 x	Router base OFV
1 x	High quality corundum grinding bits
1 x	Cylindrical cutters
1 x	High quality corundum grinding bits
1 x	Diamond Grinding Bits 1,8mm
1 x	Diamond Grinding Bits 1,8mm
1 x	Diamond Twist Drills
1 x	High quality corundum grinding bits
1 x	HSS immersion saw blades for OZI
1 x	Diamond blade
1 x	Dividing attachment TA 230 for PF 250
1 x	Diamond cutting blade for OZI
1 x	Delta sander OZI/E
1 x	HSS immersion saw blades for OZI
2 x	BeeProg2
1 x	Footswitch FS
1 x	Flame shaped milling cutters
1 x	Tungsten carbide cutter 1.0mm
1 x	Cylinder shaped milling cutters
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Set of precision cutters
1 x	Cone shaped milling cutter
2 x	BeeHive204
1 x	Tungsten carbide cutter 2.0mm
1 x	Ball-shaped diamond coated 3.2mm
1 x	Blade guides separately
1 x	Complete Engraving Kit with trial glass
1 x	Set of special steel cutters
1 x	Tungsten carbide cutter 3.0mm
1 x	Ball-shaped diamond coated 1.2mm
1 x	Diamond Grinding Bits 1mm
1 x	Motor-driven carving device MSG
1 x	Ball-shaped diamond coated 2.2mm
1 x	Ball shaped milling cutters
1 x	BGA-Bottom-106
1 x	BGA-Bottom-105
1 x	Long neck straight drill/grinder LB/E
1 x	Corundum fan sander for LWS
1 x	Machine Vice MS 4
1 x	Long neck angle milling/drilling unit LWB 220/E
1 x	Jig saw blades made of HSS
1 x	BGA-0245/0242
1 x	BGA-Bottom-111
1 x	MICRO Miller MF 70
1 x	BGA-Bottom-108
1 x	Metal Cutting Blades
1 x	MICRO Heat gun MH 550
1 x	BeeHive208S
1 x	BGA-Bottom-101
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Beeprog2C
1 x	MICRO shaper MP 400
1 x	BGA-Bottom-115
1 x	MICRO Band Saw MBS 240/E
1 x	Jig saw STS 12/E
1 x	BGA-Bottom-1
1 x	MICRO Miller FF 230
1 x	BGA-Bottom-102
1 x	BGA-Bottom-103
1 x	MICRO cutter MIC
1 x	Long neck angle grinder LHW
1 x	BGA-0246/0244
1 x	BGA-0245/0243
1 x	BGA-0246/0243
1 x	MICRO Miller FF 500
1 x	BGA-Bottom-10
1 x	Independent four jaw chuck for the DB 250

€46,008.51