€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

3 x	Sanding pads for OZI 220/E grit 80
3 x	Sanding pads for OZI 220/E grit 240
1 x	Diamond cutting blade for OZI
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	DIL32/TSOP32 ZIF 11.8mm
1 x	Turning inserts VCMT070204
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-2
1 x	Turning inserts CCMT09T304
1 x	DIL32/TSOP32 ZIF 18.4mm Flash
2 x	Fine dust paper filter for CW-matic
1 x	DIL28/TSOP28 ZIF 11,8mm Flash
3 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	SCMT060204
1 x	Insert LGTN-3
1 x	Diamond-coated cutting and roughing disc
1 x	DIL44/MLF44-1 ZIF-CS
1 x	DIL48/PLCC52 ZIF-CS 68HC11
1 x	DIL40/TSOP40 ZIF-CS 12.4mm
1 x	DIL48/TSOP48 ZIF 15.4mm
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-5
1 x	DIL44/TSOP44-II ZIF 400mil
1 x	Turning inserts WCMX050308F
1 x	DIL24/QSOP24 ZIF 150mil
1 x	Fluted filter for CW-matic
1 x	Threading inserts 60º
1 x	DIL32/TSOP32 ZIF 12.4mm Flash
1 x	Turning inserts CCMT060204
1 x	Gear Chuck
1 x	TCMT090204
1 x	TCMT110204
1 x	DIL40/TSOP40 ZIF 18.4mm Flash-1
1 x	Precision caliper square
1 x	DIL32/MLF32-1 ZIF
1 x	DIL40/TSOP40 ZIF 18.4mm
1 x	Threading inserts 60º
1 x	Centre Turning Attachment
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-1
2 x	BeeHive204
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-3
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Turning inserts SCMT09T304
1 x	Threading inserts 60º
1 x	Insert LGTN-2
1 x	Tool holder for rotary tools
1 x	DIL40/MLF64 ZIF-CS AVR-1
1 x	DIL48/TSOP48 ZIF 18.4mm
1 x	DIL28/TSOP28 ZIF 11.8 mm
1 x	SCMT09T304
1 x	DIL40/VQFP64 ZIF AWM-1
3 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Collet Set for accurate use on round components
2 x	BeeHive208S
1 x	DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x	Four Jaw Chuck
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-6
1 x	DCMT070204
1 x	DIL32/TSOP32 ZIF 18.4mm Flash
2 x	Blade holders for DS 460
1 x	WCMT050308
1 x	Replacement carving blades for MSG
1 x	DIL44/SSOP44 ZIF 240mil
1 x	BGA-0245/0243
2 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	DIL34/SSOP34 ZIF 200 mil
1 x	DIL48/SSOP70 ZIF OKI-1
1 x	HSS immersion saw blades for OZI
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	HSS cutting blade for OZI
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	BGA-0246/0243
1 x	DIL48/SSOP56 ZIF Flash-1
1 x	Long neck angle grinder LHW
1 x	BGA-Bottom-115
1 x	BGA-Bottom-111
1 x	Multiform grindstone
1 x	Beeprog2C
1 x	Sanding pads for OZI 220/E grit 150
1 x	BGA-0245/0241
1 x	TU 2404
1 x	BGA-0246/0244
1 x	BGA-Bottom-1
1 x	BGA-Bottom-105
1 x	DIL48/SSOP56 ZIF Flash-2
1 x	HSS immersion saw blades for OZI
1 x	BGA-Bottom-106
1 x	BeeProg2
1 x	DCGT 070202F-AL
1 x	Polishing machine PM 100

€35,208.13