€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Broca de alta duração de 2.4mm
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Self-adhesive white corundum sanding discs for TG 250/E
2 x	MICROMOT Mains Adapter NG 5/E
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Self-adhesive silicone film for easy sanding disc replacement
2 x	MICROMOT Mains Adapter NG 2/S
1 x	Polishing felt, medium hard
1 x	Micro Compound Table KT 70
1 x	Belt sander BBS/S
1 x	4-jaw chuck individually clamping 125mm
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	Conj 5 pinças ESD
1 x	Cylinder sander WAS/E
1 x	Precision quick-action drill chuck 0-8mm B16
1 x	3-jaw chuck centrically clamping 160mm
1 x	sandpaper for PS 13 Grit 240
1 x	MICROMOT Mains Adapter NG 2/E
3 x	Morse taper MT2 - B16
2 x	Precision quick-action drill chuck 0-10mm B16
2 x	centrically clamping 125mm
4 x	6pcs Double Open End wrench set
1 x	Lathe chuck flange for D250X550
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x	Corundum fan sander for LWS
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	Sanding pads for OZI 220/E grit 240
1 x	Tool holder type D for SWH 1-A
2 x	sanding belts for BBS/s Grit 150
1 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	Sanding fleece for LWS
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Corundum grinding disc for LWS
1 x	Tool holder type H for SWH 1-A
1 x	4-jaw chuck individually clamping 80mm
1 x	centrically clamping 100mm
1 x	HSS immersion saw blades for OZI
1 x	Super-fine sanding discs grain 400
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	MICROMOT extension cord. 300cm.
1 x	Precision magnetic gauge stand
1 x	Three jaw chuck for the lathe DB 250
1 x	sandpaper for PS 13 Grit 400
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Aluminium Die-Cast
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	surface planing and thicknessing ADH 200
2 x	sanding belts for BBS/s Grit 80
1 x	Sanding pads for OZI 220/E grit 150
1 x	machine base with shelves for D250X550
2 x	3-jaw chuck centrically clamping 125mm
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	Collet chuck ER32 for D250X550
1 x	4-jaw chuck individually clamping 100mm
1 x	Sanding pads for OZI 220/E grit 80
1 x	sandpaper for PS 13 Grot 180
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	Flexishaft MICROMOT 110/P
1 x	Flexishaft MICROMOT 110/BF
1 x	Morse taper MT3 - B16
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x	Protective device for hand-operated MICROMOT
1 x	HSS cutting blade for OZI
1 x	Quick-action tool holder kit SWH AA
1 x	Corundum sanding discs for LWS
1 x	Corundum fan sander for LWS
1 x	Steady rest for D250X550
1 x	Cutting tool 10 mm
1 x	Three-jaw steel drill chuck
1 x	Collet chuck ER25 for D250X550
1 x	Corundum sanding discs for LWS
2 x	TU 1503V
1 x	Precision quick-action drill chuck 0-13mm B16
1 x	Table Saw TKS 2500 SC
1 x	Dial gauge
1 x	MICROMOT steel collet set
1 x	Diamond cutting blade for OZI
1 x	Wood Lathe DB450
1 x	Follow rest for D250X550
1 x	surface planing and thicknessing ADH 250
1 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x	14-piece parallel supports set
1 x	MICROMOT drill stand MB 200
2 x	Tungstein carbide rasp - and cutting disc
1 x	lathe tools 10mm
1 x	sanding belts for BBS/s Grit 240
1 x	MICROMOT tool holder
1 x	Sanding fleece for LWS
1 x	Wood Lathe DB900
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Table Sawr TKS 315 E
2 x	Mill/Drill System BFW 40/E
1 x	Replacement belts for BSL 220/E
1 x	End milling cutter kit HSS 12 pcs
1 x	End mill for aluminium 3mm
1 x	Professional set for finish grinding and polishing
2 x	Grinding mop cylinder grit 120
1 x	Replacement belts for BSL 220/E
1 x	Grinding mop cylinder grit 120
1 x	End mill for aluminium 6mm
2 x	MICROMOT 50
1 x	TU 2404
2 x	Long neck angle milling/drilling unit LWB 220/E
1 x	MICRO Miller FF 500
1 x	Grinding mop cylinder grit 80
2 x	Precision drill grinder FBS 12/EF
1 x	Super-Cut
1 x	MICRO Miller FF 230
1 x	Tungsten Carbide Tipped (TCT)
1 x	Replacement belts for BSL 220/E
1 x	Replacement belts for BSL 220/E
1 x	Milling cutter set (2 - 5mm)
1 x	MICROMOT 50/E
1 x	MICROMOT 50/EF
1 x	Grinding mop cylinder grit 240
1 x	Milling cutter set (6 - 10mm)
2 x	Bench drill press TBH
1 x	Tungsten carbide cutters set
1 x	Professional Drill/Grinder IBS/E
1 x	Router base OFV
2 x	Inpection mirror 1-978
1 x	OPTI BF20L VARIO
1 x	TIP SPT-3
1 x	MICROFLAM gas soldering set MGS
1 x	EUROline mini side cutter
1 x	sclcr2525M12
1 x	EUROline top cutter
1 x	Boring Bar for CCMT 8mm
1 x	SCLCR1010E06
1 x	Boring Bar for CCMT
1 x	Cutting disc, with reinforcement
1 x	EUROline mini side cutter
1 x	Parting tool 10mm
1 x	Warding files set, 6pcs
1 x	EUROline mini side cutter
1 x	Inspector mirror
1 x	DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x	EUROline flat nose pliers
1 x	Lathe tools 10mm pastilhados
1 x	Hand magnifier with LED light 3X
1 x	EUROline end cutter
1 x	EUROline side cutter rounded head
1 x	BGA-0246/0244
1 x	BGA-Bottom-102
1 x	BGA-Bottom-101
1 x	BGA-0245/0242
1 x	BGA-0246/0243
1 x	ANTISTATIC 200ml
1 x	PRINTER 200ml
1 x	EPROM/Flash-PLCC32-2-DIL32 socket submodule
1 x	Beeprog2C
1 x	BGA-0245/0241
2 x	POLISHER 200ml
1 x	BGA-Bottom-115
1 x	SCREEN 200ml
1 x	BGA-Bottom-106
1 x	BeeHive204
1 x	BeeHive208S
1 x	BGA-Bottom-1
1 x	BGA-0245/0243
1 x	BGA-Bottom-108

€33,996.39