€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Centre Turning Attachment
1 x	Replacement belts for BSL 220/E
1 x	Long neck straight drill/grinder LB/E
2 x	Flap Wheels
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
2 x	Screwdriver 2.5
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Compact workshop vacuum cleaner CW-matic
1 x	OPTI BF20L VARIO
1 x	Pensander PS 13
1 x	Router base OFV
1 x	Chuck for TBM 220
1 x	Three-jaw steel drill chuck
1 x	Three jaw chuck for the lathe DB 250
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Super-Cut
1 x	sandpaper for PS 13 Grit 400
1 x	Diamond Coated
2 x	sandpaper for PS 13 Grot 180
2 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Surface planer AH 80
1 x	Cylinder sander WAS/E
1 x	HSS immersion saw blades for OZI
2 x	HSS cutting blade for OZI
1 x	Sanding pads for OZI 220/E grit 150
1 x	Broca de ponto 3.15 x 1.25
1 x	HSS immersion saw blades for OZI
1 x	BIT-SET
1 x	sclcr2525M12
2 x	Diamond cutting blade for OZI
1 x	Sanding pads for OZI 220/E grit 80
1 x	Sanding Drums
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Milling cutter set (2 - 5mm)
1 x	Broca de alta duração de 2.1mm
1 x	Broca de alta duração de 2.6mm
1 x	Broca de alta duração de 2.2mm
1 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	Component tweezers 5-006
1 x	Component tweezers 5-008
1 x	ESD Tweezers 5-195
1 x	Nylon Fleece Brushes
1 x	Diamond Cutting Discs
1 x	precision machine vices FMS150
1 x	precision machine vices FMS200
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Side cutters 170mm
1 x	DIL3/SOT23-3 ZIF-CS
1 x	Sanding Drums
1 x	machine base with shelves for D250X550
1 x	MICROMOT 230/E
1 x	Antiallergical Tweezers 5-121-1
1 x	Antiallergical Tweezers 5-155-1
1 x	Cutting tool 10 mm
1 x	RT100 - Horizontal-vertical circular dividing table
1 x	Tool holder type H for SWH 1-A
1 x	Antiallergical Tweezers 5-117-1
1 x	Broca de alta duração de 2.4mm
1 x	Round nose pliers 185mm
1 x	Screwdriver 2.5
1 x	Screwdriver 2.0
1 x	Screwdriver 1.5
1 x	Cross-recess Screwdrivers 000
1 x	Screwdriver 2.0
1 x	Felt polishers
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	Fibre-Cut Discs
1 x	Mini side cutters EUROline-Conductive
1 x	EUROline-Conductive set of pliers
1 x	Mini side cutters EUROline-Conductive
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	End side cutters 45º EUROline-Conductive
1 x	Side cutters EUROline-Conductive
1 x	Round nose pliers 45º EUROline-Conductive
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Mini side cutters EUROline-Conductive
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	End side cutters EUROline-Conductive
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Vacum SAA 901
1 x	Bench drill machine TBM 220
1 x	BeeHive208S
1 x	BeeHive204
1 x	BGA-0246/0243
1 x	Safety Insulated Pozidriv Screwdriver 14-641VDE
1 x	BGA-0246/0244
1 x	DIL48/LQFP64 ZIF M16C/Tiny
1 x	BGA-Bottom-118
1 x	EPROM/Flash-PLCC32-2-DIL32 socket submodule
1 x	BGA-Bottom-105
1 x	DIL48/LQFP64 ZIF M38039/M39049
1 x	BGA-Bottom-101
1 x	Safety Insulated Pozidriv Screwdriver 14-642VDE
1 x	BGA-Bottom-10
1 x	Long neck angle milling/drilling unit LWB 220/E
1 x	Metal Cutting Blades
1 x	BGA-Bottom-1
1 x	BGA-Bottom-103

€18,433.29