€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	BGA-Bottom-105
1 x	TIP SPT-10
1 x	BeeHive208S
1 x	Independent four jaw chuck for the DB 250
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Sanding fleece for LWS
1 x	Side cutters 160mm
1 x	BGA-Bottom-106
1 x	BGA-0245/0242
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	BGA-Bottom-103
1 x	Diamond-coated cutting and roughing disc
1 x	Backing disc for LWS
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Side cutters 180mm
1 x	BGA-Bottom-11
1 x	End side cutters EUROline-Conductive
1 x	Side cutters 160mm
1 x	Corundum bound cutting disc for LWS
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	BGA-Bottom-102
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	TIP SPT-4
1 x	TIP SPT-2
1 x	BGA-Bottom-108
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	EUROline mini side cutter
1 x	Corundum grinding disc for LWS
1 x	BGA-Bottom-101
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	Side cutters EUROline-Conductive
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	EUROline mini side cutter
1 x	Broca de alta duração de 2.7mm
1 x	TIP SPT-3
1 x	Replacement carving blades for MSG
1 x	Mini side cutters EUROline-Conductive
1 x	EUROline mini side cutter
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	BGA-Bottom-1
1 x	Sanding fleece for LWS
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	BGA-Bottom-118
1 x	EUROline mini side cutter
1 x	Corundum grinding disc for LWS
1 x	Mini side cutters EUROline-Conductive
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Inspector mirror
1 x	BGA-Bottom-125
1 x	Grinding mop cylinder grit 120
1 x	TIP SPT-9
1 x	BGA-Bottom-10
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	BGA-Bottom-111
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Mini side cutters EUROline-Conductive
1 x	Five piece HSS chisel set
1 x	EUROline side cutter pointed head

€9,420.82