€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	Polishing felt, medium hard
2 x	Super-fine sanding discs grain 400
1 x	Aluminium Die-Cast
1 x	Protective device for hand-operated MICROMOT
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	Professional polishing sponge
2 x	Micro Compound Table KT 70
1 x	MICROMOT tool holder
1 x	Dividing attachment TA 230 for PF 250
1 x	Flexishaft MICROMOT 110/BF
2 x	Footswitch FS
2 x	Super-fine sanding discs grain 000
1 x	Mill/Drill Unit BFB 2000.
1 x	14-piece parallel supports set
1 x	MICROMOT steel collet set
1 x	Backing disc for LWS
1 x	Lambswool polishing disc
2 x	ACCENT SERVICE TOOLS SET
2 x	6-piece wrench key set ESD
1 x	Replacement belts for BSL 220/E
1 x	Boring Bar for CCMT 8mm
1 x	Side cutters 195mm
2 x	Precision quick-action drill chuck 0-16mm B16
2 x	Antiallergical Tweezers 5-107-1
2 x	6pcs Double Open End wrench set
2 x	Antiallergical Tweezers 5-121-1
2 x	Fibre-Cut Discs
2 x	6-piece screwdriver and cross-recess set
2 x	Precision quick-action drill chuck 0-8mm B16
2 x	6-piece screwdriver and cross-recess set ESD
2 x	6-piece TORX-screwdriver-set
1 x	Cutting tool HM 20 mm
1 x	Boring Bar for CCMT 16mm
2 x	Fibre-Cut Discs
2 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	Side cutters 180mm
2 x	sclcr2525M12
2 x	BIT-SET
1 x	Boring Bar for DCMT 10mm
2 x	6-piece screwdriver set ESD
2 x	Ceramic tweezers 5-081
2 x	Fibre-Cut Discs
3 x	Brass contact cleaner brush
2 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	End side cutters EUROline-Conductive
1 x	End side cutters 45º EUROline-Conductive
1 x	Cutting tool 16 mm
2 x	Fibre-Cut Discs
3 x	Vacum SAA 901
1 x	lathe tools 8mm
1 x	Cutting tool 10 mm
1 x	Glass fibre contact cleaner brush
2 x	Antiallergical Tweezers 5-117-1
2 x	6-piece screwdriver and cross-recess set
2 x	6-piece socket wrenches ESD
1 x	Antiallergical Tweezers 5-125-1
2 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Fibre-Cut Discs
2 x	surface planing and thicknessing ADH 200
1 x	6-piece set of ESD/EGB tweezers
1 x	Spare cutting wire
1 x	Antiallergical Tweezers 5-155-1
1 x	Boring Bar for CCMT
1 x	Table Sawr TKS 315 E
1 x	6-piece screwdriver and cross-recess set
1 x	6-piece TORX-screwdriver-set ESD
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Cutting tool 8 mm
2 x	TU 1503V
1 x	Side cutters EUROline-Conductive
1 x	Side cutters 170mm
1 x	Side cutters 160mm
1 x	TU 2004V
2 x	TU 2404
1 x	DIL48/PQFP100 ZIF ST10-1
1 x	Round nose pliers 185mm
1 x	PRECISION WIRE STRIPPER ESD-PLUS
1 x	EUROline round nose pliers
1 x	PVC-insulated tweezers 5-121-6
1 x	Screwdriver 2.5
1 x	Telephone pliers stright 165mm
1 x	Cross-recess Screwdrivers 1
1 x	Screwdriver 1.5
1 x	Slot cutter 5.0mm
1 x	Edge cutter with pin 6.4mm
1 x	Screwdriver 2.0
1 x	Telephone pliers straight 205mm
1 x	Screwdriver 0.8
2 x	High quality corundum grinding bits
1 x	Round nose pliers 45º EUROline-Conductive
1 x	PLCC Puller
1 x	Cross-recess Screwdrivers 00
1 x	Cross-recess Screwdrivers 00
2 x	High quality corundum grinding bits
1 x	Rounding over cutter 6.4mm
1 x	EUROline snipe nose pliers
1 x	Rebating cutter 6.4mm
1 x	Telephone pliers bent 205mm
1 x	DIL48/PQFP144 ZIF ST10-1
1 x	10-piece wood router cutter set
1 x	EUROline side cutter rounded head
1 x	EUROline flat nose pliers
1 x	Flat nose pliers 160mm
1 x	Cross-recess Screwdrivers 1
1 x	PLCC Extractor
1 x	Safety Insulated Phillips Screwdriver 14-631VDE
1 x	Screwdriver 2.0
1 x	Plastic magnifying glass
1 x	PVC-insulated tweezers 5-117-6
1 x	V-slot cutter 6.5mm
1 x	Core box bit 3.2mm
1 x	Screwdriver 2.0
2 x	High quality corundum grinding bits
1 x	Telephon pliers straight 160mm
1 x	Flat nose pliers 165mm
2 x	surface planing and thicknessing ADH 250
1 x	Half round cutter 13mm
1 x	EUROline top cutter
1 x	High quality corundum grinding bits
1 x	Telephon pliers bent 200mm
1 x	Mini side cutters EUROline-Conductive
1 x	Cross-recess Screwdrivers 000
1 x	Safety Insulated Phillips Screwdriver 14-632VDE
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Slot cutter 6.5mm
1 x	DIL48/PQFP100 ZIF ST92Fxxx
1 x	Safety Insulated Phillips Screwdriver 14-633VDE
1 x	Cross-recess Screwdrivers 1
1 x	DIL48/PQFP100 ZIF PLD-1
1 x	Safety Insulated Pozidriv Screwdriver 14-641VDE
1 x	Telephon pliers straight 200mm
1 x	EUROline end cutter
1 x	High quality corundum grinding bits
1 x	Slot cutter 3.2mm
1 x	High quality corundum grinding bits
1 x	BGA-Bottom-115
1 x	Replacement glue sticks for HKP 220

€15,951.59