€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

1 x	Diamond Grinding Bits 1,8mm
1 x	Felt polishers
1 x	Cotton polishers
1 x	Diamond Grinding Bits 1,8mm
1 x	Felt polishers
1 x	High quality corundum grinding bits
1 x	Diamond Cutting Discs
1 x	Ball-shaped diamond coated 2.2mm
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	Diamond Twist Drills
1 x	Flexible silicon discs
1 x	Diamond Grinding Bits 1mm
1 x	Diamond Cutting Discs
1 x	Diamond Cutting Discs
1 x	Polishing paste
1 x	Felt polishers
1 x	Flexible silicon discs
1 x	Felt polishers
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	Cotton polishers
1 x	Cotton polishers
1 x	Flexible silicon discs
1 x	Diamond Grinding Bits 5mm
1 x	Flexible polishing pad set
1 x	Ball-shaped diamond coated 3.2mm
1 x	Ball-shaped diamond coated 1.2mm
1 x	Diamond Cutting Discs
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	Flexible polishing pad set
1 x	Conjunto de três brocas de ponto
1 x	HSS drill bits 1.2mm
1 x	Sanding bands 14x13mm
1 x	Nylon Fleece Brushes
1 x	Sanding Discs
1 x	HSS twist drill set to DIN 338
1 x	HSS drill bits 1.6mm
1 x	Sanding Drums
1 x	HSS drill bits 0.5mm
1 x	Sanding Drums
1 x	HSS drill bits 1.0mm
1 x	Flap Wheels
1 x	Sanding Drums
1 x	Tungsten carbide drills Ø2mm
1 x	Tungsten carbide drills Ø1mm
1 x	Sanding Drums
1 x	Flap Wheels
1 x	Glass fibre contact cleaner brush
1 x	Sanding Discs
1 x	Sanding bands 14x13mm
1 x	HSS drill bits 0.8mm
1 x	Metal Cutting Blades
1 x	Tungsten carbide drills Ø1,5mm
1 x	HSS twist drill set with centring pin
1 x	Cylindrical cutters
1 x	Complete Engraving Kit with trial glass
1 x	MICRO-screwdrivers
1 x	Tungsten carbide cutter 1.0mm
1 x	Set of special steel cutters
1 x	MICROFLAME burner MFB/E
1 x	Cylinder shaped milling cutters
1 x	Disc cutters
2 x	MICROFLAM gas soldering set MGS
1 x	Ball shaped milling cutters
1 x	Flame shaped milling cutters
1 x	Universal holder UHZ
1 x	Tungsten carbide cutter 2.0mm
1 x	Tungsten carbide cutters set
1 x	Tungsten carbide cutter 3.0mm
1 x	Brass contact cleaner brush
1 x	Set of precision cutters
1 x	Wolfram vanadium steel milling bits
1 x	Solid carbide stylus for engraving
2 x	MICRO Heat gun MH 550
1 x	Wolfram vanadium steel milling bits
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Router base OFV
1 x	Cone shaped milling cutter
1 x	Angle cutter 45 °
1 x	Milling cutter set (6 - 10mm)
1 x	Combi cutter 6.5/2.5mm
1 x	Milling cutter set (2 - 5mm)
1 x	Rebating cutter 6.4mm
1 x	10-piece wood router cutter set
1 x	Core box bit 3.2mm
1 x	Slot cutter 5.0mm
1 x	Edge cutter with pin 6.4mm
1 x	Half round cutter 13mm
1 x	Rounding over cutter 6.4mm
1 x	Slot cutter 6.5mm
1 x	Slot cutter 3.2mm
2 x	BGA-Bottom-115
1 x	BGA-Bottom-127
2 x	BGA-0245/0242
1 x	BGA-Bottom-10
1 x	BeeProg2
1 x	BGA-Bottom-103
1 x	Follow rest for D250X550
2 x	BGA-Bottom-111
1 x	Face clamping disc for D250X550
1 x	BeeHive204
1 x	Tool holder type D for SWH 1-A
1 x	Tool holder type H for SWH 1-A
1 x	BGA-Bottom-11
1 x	BGA-Bottom-118
1 x	BGA-Bottom-102
1 x	BGA-Bottom-1
1 x	BGA-0245/0241

€8,115.81