Top » Catalog » Elnec » 60-0053

€3,320.00 + VAT

BeeHive204
[60-0053]

BeeHive204

BeeHive204

Extremely fast universal 4x 48-pindrive concurrent production programmer (multiprogramming system).

 
Short description:

  • supported devices from manufacturers by 2.76 version of SW (27. Jan. 2011)
  • four independent universal programming modules (BeeProg2 based) in one unit
  • two BeeHive204 multiprogrammers can be attached to one PC to better utilize programming workplace
  • extremely fast programming, one of the fastest programmers in this category. Programs 64Mbit NOR Flash memory less than 9 seconds and 1Gbit NAND Flash less than 70 sec.
  • powerful independent pin driver circuit for each and every pin of the programmer
  • in-circuit programming capability through ISP connector
  • Very low voltage support for latest Flash memory chips
  • ESD protection on each pin of the sockets
  • USB (up to 480 Mbit/s) interface to PC
  • comfortable and easy to use control program, Windows 98/Me/NT/2000/XP/2003/XPx64/Vista/7 compatible
  • unique quick reaction to customer's needs - software update can be ready within a day from request by OnDemand software
  • approved by CE laboratory to meet CE requirements
  • made in Slovakia
  • warranty - 3 years

Please see the full information in http://www.elnec.com/products/production-programmers/beehive204/

Reviews
Manufacturers
1 x Tungstein carbide rasp - and cutting disc
1 x ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x Conj 5 pinças ESD
2 x Corundum fan sander for LWS
1 x Professional set for finish grinding and polishing
2 x replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x Inpection mirror 1-978
1 x Inspector mirror
1 x Three jaw chuck for the lathe DB 250
1 x Beeprog2C
1 x Five piece HSS chisel set
1 x Independent four jaw chuck for the DB 250
1 x Professional polishing sponge
1 x Lever Dial Indicator
1 x Drill chuck with sliding sleeve for the tailstock
1 x Grinding mop cylinder grit 120
1 x Grinding mop cylinder grit 80
1 x Replacement glue sticks for HKP 220
1 x magnifier 3.25 x Ø 45mm with additional lens
1 x Super-fine sanding discs grain 000
2 x Morse taper MT2 - B16
1 x STRIPPING TOOL WITH ADJUSTABLE KNIVES
2 x CRIMPING PLIERS/WIRE STRIPPER
1 x ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x Jig saw blades made of HSS
1 x Grinding mop cylinder grit 240
1 x Precision caliper square
1 x Super-fine sanding discs grain 400
1 x Grinding mop cylinder grit 120
1 x Supercut jig saw blades of special steel
2 x Diamond-coated cutting and roughing disc
1 x Ball-shaped diamond coated 1.2mm
1 x Morse taper MT3 - B16
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x Corundum sanding discs for LWS
1 x Mini side cutters EUROline-Conductive
1 x End side cutters EUROline-Conductive
1 x 4-jaw chuck individually clamping 80mm
1 x BGA-Bottom-1
1 x 4-jaw chuck individually clamping 125mm
1 x MICROMOT Mains Adapter NG 2/S
1 x BGA-Bottom-111
1 x 3-jaw chuck centrically clamping 100mm
1 x BGA-0245/0241
1 x Precision quick-action drill chuck 0-10mm B16
1 x Precision quick-action drill chuck 0-8mm B16
1 x BGA-0246/0244
1 x Slot cutter 3.2mm
1 x BGA-Bottom-118
1 x Coarse-toothed (25 TPI per 25mm)
1 x Mini side cutters EUROline-Conductive
1 x BGA-Bottom-106
1 x Edge cutter with pin 6.4mm
1 x Dial gauge
1 x BGA-0245/0242
1 x BGA-0245/0243
1 x sandpaper for PS 13 Grot 180
1 x centrically clamping 125mm
1 x Tungsten Carbide Tipped (TCT)
1 x Coarse-toothed (10 TPI per 25mm)
1 x Core box bit 3.2mm
1 x 3-jaw chuck centrically clamping 80mm
1 x Corundum sanding discs for LWS
1 x Half round cutter 13mm
1 x BGA-Bottom-102
1 x Lathe System PD 400
1 x Slot cutter 5.0mm
1 x Diamond Cutting Discs
1 x 4-jaw chuck individually clamping 100mm
1 x Precision magnetic gauge stand
1 x BGA-Bottom-103
1 x BGA-Bottom-108
1 x Replacement cutting wire for the THERMOCUT 12/E
1 x Corundum fan sander for LWS
1 x Angle cutter 45 °
1 x BeeHive204
1 x BeeHive208S
1 x sandpaper for PS 13 Grit 400
1 x Sanding fleece for LWS
1 x Diamond Cutting Discs
1 x Chuck for TBM 220
1 x Micro Compound Table KT 70
1 x BGA-Bottom-105
1 x Corundum bound cutting disc for LWS
1 x BGA-Bottom-11
1 x 3-jaw chuck centrically clamping 125mm
1 x Diamond Cutting Discs
1 x End side cutters 45º EUROline-Conductive
1 x BGA-Bottom-10
1 x V-slot cutter 6.5mm
1 x Corundum grinding disc for LWS
1 x CM2 - B16 - M10
1 x BGA-0246/0243
1 x Diamond Grinding Bits 1mm
1 x Mini side cutters EUROline-Conductive
1 x Corundum grinding disc for LWS
1 x Rasp plate with metal burrs made from wolfram carbide for LWS
1 x Diamond Twist Drills
1 x Diamond Cutting Discs
1 x Side cutters EUROline-Conductive
1 x Blade holders for DS 460
1 x Rebating cutter 6.4mm
€18,884.93
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Elnec
Elnec Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook