€395.00 + IVA

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Comentários

Categorias

Marcas

Informações

1 x	Pulseira ESD
1 x	Chave sextavada exterior 3.5
1 x	Chave sextavada exterior 2.5
1 x	Fio de ligação a terra
1 x	Chave sextavada exterior 1.5
1 x	Chave sextavada exterior 3.2
1 x	Chave sextavada exterior 5.5
1 x	Modulo de ligação a Terra
1 x	Chave sextavada exterior 5.0
1 x	BGA-0246/0243
1 x	MICRO Miller FF 230
1 x	Pincel de latão 4mm
2 x	Blocos escadeados em aço
1 x	BGA-Bottom-115
1 x	Mini berbequim de precisão FBS 12/EF - 12V
1 x	MICRO Miller MF 70
1 x	Laminas sem pinos 34TPI
1 x	Laminas sem pinos 41TPI
1 x	BGA-Bottom-118
2 x	Conjunto de fresas em Tungsténio
1 x	MULTI 200ml
1 x	Mini Drill de precisão FBS 240/E
1 x	SPRAYOIL 200ml
1 x	Torno MS4 para coluna
1 x	VASELINE 200ml
2 x	Torno de máquina de precisão PM 40
2 x	Laminas sem pinos 50TPI
1 x	SPRAYFLON 200ml
1 x	BGA-Bottom-105
1 x	DEGRESER 200ml
1 x	FLUX-OFF 400ml
1 x	Mini berbequim angular LWB 220/E
1 x	MICRO Miller FF 500
1 x	BeeHive208S
1 x	BGA-Bottom-103
1 x	PROTECTION 200ml
1 x	TOP-PIN 200ml
1 x	BGA-Bottom-106
1 x	BeeHive204
1 x	BGA-Bottom-102
1 x	BGA-Bottom-125
1 x	10 Recargas para 2-166
1 x	BGA-0245/0243
2 x	Laminas sem pinos 17TPI
1 x	Laminas sem pinos 36TPI
1 x	Professional Drill/Grinder IBS/E
1 x	Pincel de fibra de vidro de limpeza
1 x	Mini Drill MICROMOT 50/E
1 x	Torno de bancada para madeira DB450
1 x	Laminas sem pinos 14TPI
1 x	BGA-Bottom-111
1 x	BGA-0245/0242
1 x	VIDEOCLEAN 200ml
2 x	Pincel de fibra de vidro 2mm
1 x	Professional mini berbequim de ponteira longa

€16,051.55