€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

1 x	DIL28W/SOIC28 ZIF 300mil
1 x	DIL32/SDIP64 ZIF H8-1
1 x	DIL32/SDIP32 ZIF 400mil
1 x	DIL32/SOIC32 ZIF 445mil
1 x	DIL40/SDIP52 ZIF 55x
1 x	DIL14W/SOIC14 ZIF 150mil
1 x	DIL16/SOIC16 ZIF 200 mil
1 x	DIL28/QFN28-2 ZIF-CS
1 x	Three piece thread cutting set
1 x	DIL24W/SOIC24 ZIF 300mil
1 x	DIL44/SOIC44 ZIF-CS
1 x	DIL16W/SOIC16 ZIF 150mil
1 x	DIL16W/SOIC16 ZIF 300mil
1 x	DIL8/QFN8-1 ZIF-CS
1 x	DIL16/SOIC16-1 ZIF 170mil
1 x	DIL40/SOIC28 ZIF AWM-1
1 x	DIL40/SOIC16 ZIF MB-1
1 x	DIL44/QFN44-2 ZIF-CS
1 x	DIL28/SOIC28 ZIF 330 mil
1 x	DIL48/SDIP56 ZIF 68HC05Bx
1 x	DIL40/SOIC20 ZIF MB95-1
1 x	DIL20W/SOIC20 ZIF 300mil
1 x	DIL20/SOIC20 ZIF 200mil
1 x	Earth wire with dummy Schunko-plug
1 x	Broca de alta duração de 2.8mm
1 x	BGA-Bottom-111
1 x	Tungsten carbide cutter 3.0mm
1 x	Fluted filter for CW-matic
1 x	Flexible silicon discs
1 x	Ball shaped milling cutters
1 x	Flexible polishing pad set
1 x	Wheels brushes
1 x	BeeHive208S
1 x	Wolfram vanadium steel milling bits
1 x	Stainless steel cups
1 x	DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x	lathe tools 10mm
1 x	Flexible polishing pad set
1 x	BGA-Bottom-105
1 x	Solid carbide stylus for engraving
1 x	Flexible silicon discs
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Protective device for hand-operated MICROMOT
1 x	EUROline-Conductive set of pliers
1 x	BGA-Bottom-108
1 x	Brass brushes
1 x	Felt polishers
1 x	Glass fibre contact cleaner brush
1 x	Cotton polishers
1 x	Lathe tools 8mm pastilhados
1 x	Wolfram vanadium steel milling bits
1 x	Stainless steel brushes
1 x	BGA-Bottom-103
1 x	Tungsten carbide cutter 1.0mm
1 x	End side cutters EUROline-Conductive
1 x	Cotton polishers
1 x	Felt polishers
1 x	BGA-Bottom-1
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	Mini side cutters EUROline-Conductive
1 x	Flexible silicon discs
1 x	Disc cutters
1 x	Tungsten carbide cutter 2.0mm
1 x	Three-jaw steel drill chuck
1 x	BGA-0246/0243

€12,937.08