€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

2 x	MICROMOT Mains Adapter NG 5/E
2 x	MICROMOT Mains Adapter NG 2/S
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Replacement glue sticks for HKP 220
1 x	Hand Magnifier 2-293
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Independent four jaw chuck for the DB 250
1 x	Tungsten Carbide Tipped (TCT)
1 x	Universal polishing paste
1 x	Super-Cut
1 x	Tungsten carbide cutters set
1 x	Felt cloth polishing disc (100 x 15mm)
1 x
1 x	Five piece HSS chisel set
1 x	Step clamps made of steel
1 x	Machine Vice MS 4
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Three jaw chuck for the lathe DB 250
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Diamond Coated
1 x	Precision steel vice PM 40
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	BeeHive208S
1 x	Wood Lathe DB900
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Slot cutter 3.2mm
1 x	BGA-Bottom-102
1 x	Crosscut 'Super-Cut' blade
1 x	Four Jaw Chuck
1 x	Half round cutter 13mm
1 x	BGA-Bottom-118
1 x	BGA-Bottom-125
1 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	BGA-Bottom-106
1 x	BGA-Bottom-11
1 x	Blade holders for DS 460
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Diamond blade
1 x	Replacement belts for BSL 220/E
1 x	BGA-Bottom-105
1 x	Gear Chuck
1 x	BGA-0245/0243
1 x	Glass fibre contact cleaner brush
1 x	Rebating cutter 6.4mm
1 x	BGA-0245/0241
1 x	BGA-Bottom-1
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Table Saw TKS 2500 SC
1 x	Replacement belts for BSL 220/E
1 x	Slot cutter 5.0mm
1 x	10-piece wood router cutter set
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Corundum fan sander for LWS
1 x	Edge cutter with pin 6.4mm
1 x	Fixed Steady
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Saw blade made of high-alloy special steel
1 x	Combi cutter 6.5/2.5mm
1 x	Wood Lathe DB450
1 x	Vacum SAA 901
1 x	Centre Turning Attachment
1 x	surface planing and thicknessing ADH 250
1 x	Slot cutter 6.5mm
1 x	Core box bit 3.2mm
1 x	BGA-Bottom-103
1 x	BGA-0246/0244
1 x	V-slot cutter 6.5mm
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	BGA-0246/0243
1 x	BGA-Bottom-10
1 x	BeeHive204
1 x	Replacement belts for BSL 220/E
1 x	Collet Set for accurate use on round components
1 x	Coarse-toothed (18 TPI per 25mm)

€18,737.52